Troy-Bilt 12A-466M011, 12AI839 Series Fast Start Manual

Read and understand all instruction, warning, and danger labels.

IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND

FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .

Lea el manual de operación anexo sobre ensamblaje e inicio.

Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)

Use cable
tie to secure
cables to
lower handle.

1

2

3

4

Refer to Operator’s Manual for instructions on attaching the grass catcher.

778-1166012A-466 © 2008

Blade Control Handle

(A) Lift handle
to extended
position.
(B) Tighten
star knobs.

Recoil
Starter

Star Knobs

Place ends of
lower handle
onto handle
brackets. Insert
carriage bolts
and tighten
with wing nuts.

A

B

A

C

B

D

(A) Hold blade
control handle
against upper
handle.
(B)(C) Slowly
pull starter
rope from
engine and slip
starter rope
into rope guide.
(D) Tighten
rope guide
wing knob.

Read and understand all instruction, warning, and danger labels.

IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND

FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .

Lea el manual de operación anexo sobre ensamblaje e inicio.

Need Help?

Call 1-888-TO-HELP-U

Lea el manual de operación anexo sobre ensamblaje e inicio.

Fill tank with gas up to within 1/2-inch

of top of tank. Do not overll.

Fill engine with entire contents of oil bottle

supplied. Do not overll.

5

6

Need Help?

Call 1-888-TO-HELP-U

Gas Cap

Oil Fill

Depress blade control handle and hold.

8

7

Pull starter rope with quick, full arm stroke.
If engine does not start after ten seconds of
repeated pulls, wait a few minutes and repeat
steps 7 through 8.