Trotec TVE 31 T operation manual

TVE 31 T / TVE 32 T

EN

OPERATING MANUAL

TOWER FAN

TRT-BA-TVE31T-TVE32T-TC2019-04-001-EN

Table of contents

Notes regarding the operating manual................................. 2

Safety .....................................................................................2

You can download the current version of the operating manual
and the EU declaration of conformity via the following link:

Information about the device................................................4

Transport and storage...........................................................4

Assembly and start-up..........................................................4

Operation ...............................................................................6

Errors and faults....................................................................8

Maintenance ..........................................................................8

Technical annex.....................................................................9

Disposal .................................................................................9

Notes regarding the operating manual

Symbols

Warning of electrical voltage

This symbol indicates dangers to the life and health of
persons due to electrical voltage.

Warning

This signal word indicates a hazard with an average
risk level which, if not avoided, can result in serious
injury or death.

Caution

This signal word indicates a hazard with a low risk
level which, if not avoided, can result in minor or
moderate injury.

Note

This signal word indicates important information (e.g.
material damage), but does not indicate hazards.

Info

Information marked with this symbol helps you to carry
out your tasks quickly and safely.

Follow the manual

Information marked with this symbol indicates that the
operating manual must be observed.

TVE 31 T

https://hub.trotec.com/?id=43249

TVE 32 T

https://hub.trotec.com/?id=43250

Safety

Read this manual carefully before starting or using the
device. Always store the manual in the immediate vicinity
of the device or its site of use!

Warning
Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may
result in electric shock, fire and/ or serious injury.

Save all warnings and instructions for future
reference.

This appliance can be used by children aged from
8years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and
user maintenance shall not be made by children
without supervision.

• Do not use the device in potentially explosive rooms.

• Do not use the device in aggressive atmosphere.

• Set the device up in an upright and stable position.

• Let the device dry out after a wet clean. Do not operate it
when wet.

• Do not use the device with wet or damp hands.

• Do not expose the device to directly squirting water.

• Never insert any objects or limbs into the device.

• Do not cover or transport the device during operation.

• Do not sit on the device.

2 EN

tower fan TVE 31 T / TVE 32 T

• This appliance is not a toy! Keep away from children and
animals. Do not leave the device unattended during
operation.

• Check accessories and connection parts for possible
damage prior to every use of the device. Do not use any
defective devices or device parts.

• Ensure that all electric cables outside of the device are
protected from damage (e.g. caused by animals). Never
use the device if electric cables or the power connection
are damaged!

• The electrical connection must correspond to the
specifications in chapter Technical data.

• Insert the mains plug into a properly secured mains
socket.

• Observe the technical data when selecting extensions to
the power cable. Completely unroll the extension cable.
Avoid electrical overload.

• Before carrying out maintenance, care or repair work on
the device, remove the mains plug from the mains socket.
Hold onto the mains plug while doing so.

• Switch the device off and disconnect the power cable from
the mains socket when the device is not in use.

• Do not under any circumstances use the device if you
detect damages on the mains plug or power cable.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Defective power cables pose a serious health risk!

• When positioning the device, observe the minimum
distances from walls and other objects as well as the
storage and operating conditions specified in the Technical
data chapter.

• Make sure that the air inlet and outlet are not obstructed.

• Make sure that there are no loose items or dirt located in
the immediate surroundings of air inlet and air outlet.

• When unmounted, the device should be neither operated
nor connected to the mains.

• Improper installation can lead to a fire, electric shock or
severe personal injury.

• The device is provided with an overheating protection
which is activated by overheating of the device (when
exceeding the operating temperature). In such an event the
device switches off automatically.

Intended use

Only use the device TVE 31 T/ TVE 32 T as tower fan for the
ventilation of interior spaces whilst adhering to the technical
data.

Improper use

• Do not place the device on wet or flooded ground.

• Do not place any objects, e.g. clothing, on the device.

• Do not use the device outdoors.

• Any operation other than as described in this manual is
prohibited. Non-observance renders all claims for liability
and guarantee null and void.

• Any unauthorised modifications, alterations or structural
changes to the device are forbidden.

Personnel qualifications

People who use this device must:

• be aware of the dangers that occur when working with
electric devices in damp areas.

• have read and understood the operating manual, especially
the Safety chapter.

Residual risks

Warning of electrical voltage

Work on the electrical components must only be
carried out by an authorised specialist company!

Warning of electrical voltage

Before any work on the device, remove the mains plug
from the mains socket!
Hold onto the mains plug while pulling the power cable
out of the mains socket.

Warning

Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!

Warning

The device is not a toy and does not belong in the
hands of children.

Warning

Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.

Note

Do not use abrasive cleaners or solvents to clean the
device.

Behaviour in the event of an emergency

1. Switch off the device.

2. In an emergency, disconnect the device from the mains
feed-in: Hold onto the mains plug while pulling the power
cable out of the mains socket.

3. Do not reconnect a defective device to the mains.

EN 3

tower fan TVE 31 T / TVE 32 T

Information about the device

1

2

3

SPEED

TIMER

POWER

OSC

MODE

4

Transport and storage

Device description

The tower fan TVE 31 T/ TVE 32 T is suitable for indoor air
circulation.

The device comes with the following features:

• 3 speed levels

• Adjustable timer function up to 12hours

• On-demand 60°oscillation

Device depiction

Note

If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.

Transport

To make the device easier to transport, it is fitted with a carry
handle.

Before transporting the device, observe the following:

• Switch off the device.

• Hold onto the mains plug while pulling the power cable out
of the mains socket.

• Do not use the power cable to drag the device.

After transporting the device, observe the following:

• Set up the device in an upright position after transport.

Storage

Before storing the device, proceed as follows:

• Switch off the device.

• Hold onto the mains plug while pulling the power cable out
of the mains socket.

When the device is not being used, observe the following
storage conditions:

• dry and protected from frost and heat

• in an upright position where it is protected from dust and
direct sunlight

• with a cover to protect it from invasive dust, if necessary

• Place no further devices or objects on top of the device to
prevent it from being damaged.

• Remove batteries from the remote control.

Assembly and start-up

Scope of delivery

• 1xDeviceTVE31T/TVE32T

• 1 x Remote control (without batteries)

No. Designation

1 Control panel

2 Fan body

3 Foot

4 Remote control

4 EN

tower fan TVE 31 T / TVE 32 T

• 1x Manual

Unpacking the device

1. Open the cardboard box and take the device out.

2. Completely remove the packaging.

3. Fully unwind the power cable. Make sure that the power
cable is not damaged and that you do not damage it during
unwinding.

Assembly

5

A

B

D

C

C

6

Mounting the foot

1. Connect the two parts of the foot(3) so that the connection
pieces interlock.

Connecting the fan body and foot

1. Remove the plastic nut(5) underneath the fan body.

2. Connect the assembled foot with the fan body.

3. Tighten the plastic nut(5) at the bottom side of the fan
body.

4. Route the power cable through the retainers underneath
the foot as shown in the illustration below to ensure safe
positioning of the fan.

Start-up

When positioning the device, observe the minimum distance
from walls or other objects as described in the Technical data
chapter.

• Before restarting the device, check the condition of the
power cable. If there are doubts as to the sound condition,
contact the customer service.

• Set the device up in an upright and stable position.

• Do not create tripping hazards when laying the power
cable or other electric cables, especially when positioning
the device in the middle of the room. Use cable bridges.

• Make sure that extension cables are completely unrolled.

• Make sure that no curtains or other objects interfere with
the air flow.

Prior to initial start-up, insert batteries in the remote control.

Inserting batteries into the remote control

Remove the battery compartment(6) underneath the remote
control and insert a typeCR2025 3V battery.

Note

Do not use rechargeable batteries!
Observe the Technical data chapter for start-up.

EN 5

Connecting the power cable

tower fan TVE 31 T / TVE 32 T

• Insert the mains plug into a properly secured mains
socket.

Operation

7

8

9

1011

°c

12

13

14

15

16

Operating elements

No. Designation Meaning

7 OSC button Activating and deactivating the

oscillation function

8 TIMER button Timer function for automatic

switch-off
Setting the number of hours of the
activated timer

9 MODE button Selecting the operating mode:

normal operation
natural wind
night mode

10 Fan stage button Setting the fan stage (1–3)

stage1 = low fan speed
stage2 = medium fan speed
stage3 = high fan speed

11 ON/OFF button Switching the device on and off

12 Fan stage

indication

13 Indication of the

unit

14 Temperature/

timer segment
display

15 Oscillation

indication

Indicates the set fan stage

Indication of the unit (hours/ degrees
Celsius)

• Room temperature indication

• Indication of the number of hours of
the activated timer in increments of
1hour

Indicates whether the oscillation
function is activated

16 Operating mode

LEDs

Indicate the selected operating mode:

= normal operation
= natural wind
= night mode

Switching the device on

Once you have completely installed the device as described in
the Start-up chapter, you can switch it on.

1. Press the ON/OFF button(11).

ð An acoustic signal is emitted and the device starts up in

normal operation mode at fan stage1.

Setting the operating mode

The device has the following operating modes:

• normal operation

• natural wind

• night mode

Normal operation

In normal operation mode the fan keeps running at the desired
fan stage. The fan stage can be set from 1 to 3 in this operating
mode and is shown on the fan stage indication(12).

Please proceed as follows to set the fan stage in normal
operation mode:

1. Press the MODE button(9) until the = normal operation
LED lights up among the operating mode LEDs(16).

ð The device runs in normal operation mode.

2. Press the fan stage button(10) to switch between the fan
stages.

ð The selected fan stage is indicated by the fan stage

indication(12).

ð The device keeps running at the set fan stage.

Natural wind

In natural wind mode, the fan speed automatically increases
and decreases alternately to generate a pleasant, natural air
stream. You can set the fan stage manually from 1 to 3 in this
mode.

Please proceed as follows to activate natural wind mode:

1. Press the MODE button(9) until the = natural wind LED
lights up among the operating mode LEDs(16).

ð The device switches to natural wind mode.

2. Press the fan stage button(10) to switch between the fan
stages.

ð The selected fan stage is indicated by the fan stage

indication(12).

6 EN

tower fan TVE 31 T / TVE 32 T

Night mode

SPEED

TIMER

POWER

OSC

MODE

17

11

7

9

10

8

In night mode, the device gradually changes the fan stage
automatically depending on the selected fan stage. You can set
the fan stage manually from 1 to 3 in this mode.

1. Press the MODE button(9) until the = night mode LED
lights up among the operating mode LEDs(16).

ð The device runs in night mode.

2. Press the fan stage button(10) to switch between the fan
stages.

ð The selected fan stage is indicated by the fan stage

indication(12).

ð After a few seconds, the display will be dimmed

automatically.

Setting the timer

Note

If the timer is activated, the device will no longer
display the current room temperature during operation.

The timer has one mode of operation:

• automatic switch-off upon expiry of a preset number of
hours

The number of hours of the timer can range from 1 to 12. The
timer can be set in increments of 1hour (1h to 12h).

The function can be set in all operating modes. It can only be
activated during operation.

Automatic switch-off

ü The device is switched on.

1. Press the TIMER button(8) to activate the timer.

ð The value 1 h appears on the temperature/timer

segment display(14).

2. Press the TIMER button(8) to select the desired number of
hours until automatic switch-off.

ð The temperature/timer segment display(14) indicates

the number of hours until automatic switch-off.

ð After the predefined time, the device switches itself off.

3. To delete the setting, press the TIMER button(8)
repeatedly until the temperature/timer segment
display(14) no longer indicates any value.

Memory function

If you switch the device back on from standby mode or after a
power failure, the settings selected for the last used operating
mode are saved.

Any activated timer will not be saved in the device.

Using the oscillation function

By means of the oscillation function you can achieve consistent
ventilation.

ü The device is switched on and operating.

1. Press the OSC button(7) to activate the oscillation
function.

ð The oscillation function is activated.
ð The fan body rotates to and fro by up to 60°.

2. Press the OSC button(7) to deactivate the oscillation
function.

ð The oscillation function is deactivated.
ð The device stops oscillation at the desired position and

continues to run in the selected operating mode.

Remote control

All settings of the device can also be made using the remote
control included in the scope of delivery.

No. Designation Meaning

17 Remote control

transmitter/

For infrared transmission to the
device

receiver

11 ON/OFF button Switching the device on and off

7 OSC button Activating and deactivating the

oscillation function

9 MODE button Selecting the operating mode:

normal operation
natural wind
night mode

8 TIMER button Timer function for automatic

switch-off
Setting the number of hours of the
activated timer

10 Fan stage button Setting the fan stage (1–3)

stage1 = low fan speed
stage2 = medium fan speed
stage3 = high fan speed

EN 7

tower fan TVE 31 T / TVE 32 T

Shutdown

Warning of electrical voltage

Do not touch the mains plug with wet or damp hands.

• Switch off the device.

• Hold onto the mains plug while pulling the power cable out
of the mains socket.

• Clean the device according to the Maintenance chapter.

• Store the device according to the Storage chapter.

Maintenance

Activities required before starting maintenance

Warning of electrical voltage

Do not touch the mains plug with wet or damp hands.

• Switch the device off.

• Hold onto the mains plug while pulling the power cable out
of the mains socket.

Errors and faults

The device has been checked for proper functioning several
times during production. If malfunctions occur nonetheless,
check the device according to the following list.

The device does not start:

• Check the power connection.

• Check the power cable and mains plug for damages.

• Check the on-site fusing.

• Check whether the overheating protection has tripped, see
chapter Safety.

• Wait for 10minutes before restarting the device. If the
device is not starting, have the electrics checked by a
specialist company or by Trotec.

The fan does not start:

• Check whether the unit is switched on.

• Check the power supply and whether the plug or cable is
defective.

The device is loud or vibrates:

• Check whether the device is set up in a stable and upright
position.

• Check whether the device is mounted correctly.

Cleaning the housing

Clean the housing with a soft, damp and lint-free cloth. Make
sure that no moisture enters the housing. Protect electrical
components from moisture. Do not use any aggressive cleaning
agents such as cleaning sprays, solvents, alcohol-based or
abrasive cleaners to dampen the cloth.

Note

Wait for at least 3 minutes after maintenance and
repair work. Only then switch the device back on.

Your device still does not operate correctly after these
checks?

Please contact the customer service. If necessary, bring the
device to an authorized specialist electrical company or to
Trotec for repair.

8 EN

tower fan TVE 31 T / TVE 32 T

Technical annex

Li-Ion

Technical data

Parameter Value

Model

Fan stages 3 3

Air velocity 2.9m/s 2.9m/s

Input voltage 220 – 240 V /

Power consumption 45 W 45 W

Power cable length 1.60 m 1.60 m

Oscillation function 60° 60°

Sound pressure
level
(at 1m distance,
stage 3)

Weight 2.5kg 3kg

Dimensions
(lengthx widthx
height)

Minimum distance
to walls and other
objects
top (A):
rear (B):
sides (C):
front (D):

Battery for the
remote control

TVE 31 T TVE 32 T

220 – 240 V /

50Hz/60 Hz

50Hz /60 Hz

58.5 dB(A) 58.5 dB(A)

250 x 250x
920mm

30 cm
30 cm
30 cm
30 cm

300x 300x
1119mm

30 cm
30 cm
30 cm
30 cm

CR2025 button cell 3V

Disposal

The icon with the crossed-out waste bin on waste
electrical or electronic equipment stipulates that this equipment
must not be disposed of with the household waste at the end of
its life. You will find collection points for free return of waste
electrical and electronic equipment in your vicinity. The
addresses can be obtained from your municipality or local
administration. For further return options provided by us please
refer to our website www.trotec24.com.

The separate collection of waste electrical and electronic
equipment aims to enable the re-use, recycling and other forms
of recovery of waste equipment as well as to prevent negative
effects for the environment and human health caused by the
disposal of hazardous substances potentially contained in the
equipment.

In the European Union, batteries and accumulators must not be
treated as domestic waste, but must be disposed of
professionally in accordance with Directive 2006/66/EC of the
European Parliament and of the Council of 6September 2006
on batteries and accumulators. Please dispose of batteries and
accumulators according to the relevant legal requirements.

EN 9

tower fan TVE 31 T / TVE 32 T

Trotec GmbH & Co. KG

Grebbener Str. 7
D-52525 Heinsberg

[phone]
[phone]

[e-mail]
www.trotec.com