How it Works
Trotec
Loading...
PSCS 11-20V
operation manual
19 pgs2.83 Mb0
operation manual [de]
19 pgs2.83 Mb0
Table of contents
Loading...

Trotec PSCS 11-20V operation manual

PSCS 11-20V
EN
ORIGINAL INSTRUCTIONS
CORDLESS DRILL DRIVER
TRT-BA-PSCS11-20V-TC2016-16-005-EN

Table of contents

Wear safety glasses
Information marked with this symbol indicates that you should wear eye protection.

Notes regarding the instructions

Symbols

Wear a protective mask
Information marked with this symbol indicates that you should wear a protective mask.
Wear protective clothing
Information marked with this symbol indicates that you should wear protective clothing.
Wear protective gloves
Information marked with this symbol indicates that you should wear protective gloves.
You can download the current version of the instructions and the EUdeclaration of conformity via the following link:
PSCS 11-20V
https://hub.trotec.com/?id=42025
Warning of electrical voltage
This symbol indicates dangers to the life and health of persons due to electrical voltage.
Warning of explosive substances
This symbol indicates dangers to the life and health of persons due to potentially explosive substances.
Warning
This signal word indicates a hazard with an average risk level which, if not avoided, can result in serious injury or death.
Caution
This signal word indicates a hazard with a low risk level which, if not avoided, can result in minor or moderate injury.
Note
This signal word indicates important information (e.g. material damage), but does not indicate hazards.
Info
Information marked with this symbol helps you to carry out your tasks quickly and safely.

Safety

General Power Tool Safety Warnings
Warning Read all safety warnings, instructions, illustrations
and specifications provided with this power tool.
Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term power tool in the warnings refers to your mains­operated (corded) power tool or battery-operated (cordless) power tool.
Follow the manual
Information marked with this symbol indicates that the instructions must be observed.
2 EN
cordless drill driver PSCS 11-20V
General Power Tool Safety Warnings– Work area safety
• Keep work area clean and well lit. Clutter or dark areas invite accidents.
• Do not operate power tools in explosive atmosphere,
such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust
or fumes.
• Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
General Power Tool Safety Warnings– Electrical safety
• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is
unavoidable, use a residual current device(RCD) protected supply. Use of an RCD reduces the risk of
electric shock.
General Power Tool Safety Warnings– Personal safety
• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situation.
• Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
• If devices are provided for the connection of dust
extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can
reduce dust-related hazards.
• Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool safety principles. A careless action can cause severe
injury within a fraction of a second.
General Power Tool Safety Warnings– Power tool use and care
• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or
remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
EN 3
cordless drill driver PSCS 11-20V
• Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by
poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
General Power Tool Safety Warnings– Battery tool use and care
• Recharge only with charger specified by the manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with another battery pack.
• Use power tools only with specifically designed battery packs. Use of any other battery packs may create a risk of injury and fire.
• When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
• Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
• Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion.
• Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at
temperatures outsides the specified range may damage the battery and increase the risk of fire.
General Power Tool Safety Warnings– Service
• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
• Never service damaged battery pack. Service of battery packs should only be performed by the manufacturer or authorized service providers.
Device-specific safety warnings for cordless drill drivers
• Secure the workpiece. The grip of tensioning devices or a vice is more secure than holding the workpiece only by hand.
• Hold the power tool firmly. When tightening or loosening screws, high reaction torques can occur temporarily.
• Immediately switch off the power tool if the insertion tool blocks. Beware of high reaction torques causing a kickback.
• Hold the power tool by insulated gripping surfaces,
when performing an operation where the cutting accessory or fasteners may contact hidden wiring.
Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock.
• For any work on the device, as well as during transport
or storage, set the switch for the rotational direction to centre position (locked). This prevents unintentional
starting of the power tool.
• Regularly check the tool holder for wear or damage.
• Wait until the power tool has come to a standstill,
before putting it down.
4 EN
cordless drill driver PSCS 11-20V
Safety instructions when using long drill bits
• Never operate at higher speed than the maximum speed rating of the drill bit. At higher speeds, the bit is
likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury.
• Always start drilling at low speed and with the bit tip in contact with the workpiece. At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury.
• Apply pressure only in direct line with the bit and do not apply excessive pressure. Bits can bend causing breakage or loss of control, resulting in personal injury.

Intended use

Only use the device PSCS 11-20V:
• for screwing in and loosening screws,
• for drilling in wood, plastic, ceramic and metal,
whilst adhering to the technical data.
We recommend using the power tool with original Trotec accessories.

Foreseeable misuse

The device is not intended for drilling in concrete or natural stone.
Any other use than the one described in the chapter "Intended use" is regarded as reasonably foreseeable misuse.

Safety signs and labels on the battery

Note
Do not remove any safety signs, stickers or labels from the device. Keep all safety signs, stickers and labels in legible condition.
The following safety signs and labels are attached to the battery:
Warning of explosion risk!
These symbols indicate the following: Do not expose the battery pack or tool to fire or excessive temperature! Do not let the battery come into contact with water or fire! Avoid direct sunlight and moisture. There is a risk of explosion!
Never charge the battery at ambient temperatures below10°C or above40°C. Charging improperly or at temperatures outsides the specified range may damage the battery and increase the risk of fire.
Observe the correct disposal of the battery!
This symbol indicates the following: Ensure that the battery is disposed of correctly and never dispose of it in waste water or public waters. The battery contains irritating, caustic and toxic substances that pose significant risks to people and the environment.

Personnel qualifications

People who use this device must:
• have read and understood the instructions, especially the Safety chapter.
EN 5
cordless drill driver PSCS 11-20V

Personal protective equipment

Wear eye protection.
With it you protect your eyes from splintering, falling and flying pieces which could cause injuries.
Warning of explosive substances
Do not expose the battery to temperatures above 45°C! Do not let the battery come into contact with water or fire! Avoid direct sunlight and moisture. There is a risk of explosion!
Wear a protective mask.
It saves you from inhaling harmful dusts generated when processing workpieces.
Wear protective gloves.
They protect your hands from burns, crushing injuries and skin abrasions.
Wear tight-fitting protective clothing.
This protects you from the draw-in and entanglement hazard posed by rotating parts.

Residual risks

Warning of electrical voltage
Electric shock from insufficient insulation. Check the device for damages and proper functioning before each use. If you notice damages, no longer use the device. Do not use the device when the device or your hands are damp or wet!
Warning of electrical voltage
Work on the electrical components must only be carried out by an authorised specialist company!
Warning of electrical voltage
Before any work on the device, remove the mains plug from the mains socket and the battery from the device! Hold onto the mains plug while pulling the power cable out of the mains socket.
Warning of electrical voltage
There is a risk of a short-circuit due to liquids penetrating the housing! Do not immerse the device and the accessories in water. Make sure that no water or other liquids can enter the housing.
Warning of hot surface
The insertion tool might still be hot after the application. Burn hazard when touching the insertion tool. Do not touch the insertion tool bare-handed! Wear protective gloves!
Warning
Toxic dusts! The harmful / toxic dusts produced during operation pose of risk to the health of the operator and persons in the vicinity. Wear eye protection and a dust mask!
Warning
Do not process materials containing asbestos. Asbestos is considered carcinogenic.
Warning
Make sure not to hit power, gas or water lines when working with a power tool. If necessary, use a pipe detector to check the wall you want to drill in or slit open.
Warning
Risk of injuries caused by flying parts or bursting tool heads.
Warning
Dangers can occur at the device when it is used by untrained people in an unprofessional or improper way! Observe the personnel qualifications!
Warning
The device is not a toy and does not belong in the hands of children.
Warning
Risk of suffocation! Do not leave the packaging lying around. Children may use it as a dangerous toy.
6 EN
cordless drill driver PSCS 11-20V
Loading...
+ 13 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use