Trotec PMTS 10-12V operation manual
PMTS 10-12V
EN
ORIGINAL INSTRUCTIONS
CORDLESS MULTI-FUNCTION
TOOL
TRT-BA-PMTS10-12V-TC-003-EN
Table of contents
Notes regarding the instructions ..........................................1
Info
Information marked with this symbol helps you to carry
out your tasks quickly and safely.
Safety .....................................................................................2
Information about the device................................................6
Transport and storage...........................................................8
Start-up..................................................................................9
Operation .............................................................................13
Available accessories..........................................................16
Errors and faults..................................................................17
Maintenance ........................................................................18
Disposal ...............................................................................18
Declaration of conformity ...................................................19
Notes regarding the instructions
Symbols
Warning of electrical voltage
This symbol indicates dangers to the life and health of
persons due to electrical voltage.
Follow the manual
Information marked with this symbol indicates that the
operating manual must be observed.
Wear hearing protection
Information marked with this symbol indicates that you
should wear hearing protection.
Wear safety glasses
Information marked with this symbol indicates that you
should wear eye protection.
Wear a protective mask
Information marked with this symbol indicates that you
should wear a protective mask.
Wear protective clothing
Information marked with this symbol indicates that you
should wear protective clothing.
Wear protective gloves
Information marked with this symbol indicates that you
should wear protective gloves.
You can download the current version of the operating manual
and the EU declaration of conformity via the following link:
Warning of explosive substances
This symbol indicates dangers to the life and health of
persons due to potentially explosive substances.
Warning of hot surface
This symbol indicates dangers to the life and health of
persons due to hot surface.
Warning of sharp object
This symbol indicates dangers to the life and health of
persons due to pointed objects.
Warning
This signal word indicates a hazard with an average
risk level which, if not avoided, can result in serious
injury or death.
Caution
This signal word indicates a hazard with a low risk
level which, if not avoided, can result in minor or
moderate injury.
Note
This signal word indicates important information (e.g.
material damage), but does not indicate hazards.
PMTS 10-12V
https://hub.trotec.com/?id=39526
1 EN
cordless multi-function tool PMTS 10-12V
Safety
Read this manual carefully before starting or using the
device. Always store the manual in the immediate vicinity
of the device or its site of use!
Warning
Observe all the safety warnings, instructions,
illustrations and technical data provided with this
power tool.
Failure to follow the instructions below may result in
electric shock, fire and/ or serious injury.
Save all warnings and instructions for future
reference.
The term power tool used in the safety warnings refers to both
mains-operated and battery-powered electric tools (with/
without power cable).
General Power Tool Safety Warnings – Work area
safety
• If operating a power tool in a damp location is
unavoidable, use a residual current device(RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
General Power Tool Safety Warnings – Personal
safety
• Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal
injury.
Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
• Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
General Power Tool Safety Warnings – Electrical
safety
• Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
• Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep the cord
away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric
shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
• Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites
accidents.
• Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal
injury.
• Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
• Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away from
moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
• If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. The use of a dust
extraction system may reduce dust-related hazards.
• Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool
safety principles. A careless action can cause severe
injury within a fraction of a second.
EN 2
cordless multi-function tool PMTS 10-12V
General Power Tool Safety Warnings – Power tool
use and care
• Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and / or
the battery pack, if detachable, from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
• Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
• Maintain power tools and accessories carefully. Check
for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the
power tool’s operation. If damaged, have the power
tool repaired before use. Many accidents are caused by
poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
• Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
• Keep handles and gripping surfaces dry, clean and
free from oil and grease. Slippery handles and gripping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
General Power Tool Safety Warnings – Battery tool
use and care
• Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
• Use power tools only with specifically designated
battery packs. Use of any other battery packs may create
a risk of injury and fire.
• When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from
the battery. Avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
• Do not use a damaged or modified battery. Damaged or
modified batteries can behave unexpectedly and lead to
fires, explosions or injuries.
• Do not expose a battery to fire or excessively high
temperatures. Exposure to fire or temperatures above
130°C (265°F) may cause an explosion.
• Follow all the instructions for charging and never
charge the battery or the cordless tool outside the
temperature range specified in the operating
instructions. Incorrect charging or charging outside of the
permissible temperature range can destroy the battery and
increase the risk of fire.
General Power Tool Safety Warnings – Service
• Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
• Never service damaged battery packs. Service of
battery packs should only be performed by the
manufacturer or authorized service providers.
Safety warnings for multi-function tools
• Hold the power tool by its insulated gripping surfaces
when performing an operation where the insertion tool
may contact hidden wiring. Contacting a live wire might
energize exposed metal parts of the device and lead to an
electric shock.
• Only use the power tool for dry sanding. Water entering
an electrical appliance increases the risk of electric shock.
3 EN
cordless multi-function tool PMTS 10-12V
Warning
Fire hazard! Avoid overheating of the material to be
sanded and the sander. Before taking work breaks
always empty the dust container.
Unfavourable conditions such as flying sparks when
sanding metal render abrasive dust in the dust bag,
micro filter, paper bag (or in the filter bag or filter of the
vacuum cleaner) prone to self-ignition. The risk is
particularly high when the abrasive dust is mixed with
residues of paint, polyurethane or other chemical
substances and the sanding material is hot after a
longer period of work.
• Keep your hands out of the sawing area. Do not reach
underneath the workpiece. Risk of injury upon contact
with the saw blade.
• Use appropriate detection equipment to track down
concealed supply lines or consult the local utility
companies. Contact with electrical lines may result in fire
and electric shock. Damaging a gas line may lead to an
explosion. Penetrating a water line causes property
damage and may cause an electric shock.
• During operation hold onto the power tool with both
hands and make sure you stand firmly on the ground.
It is safer to handle the power tool with two hands.
• Use the anti-vibration handle supplied with the device.
Losing control of the power tool may result in personal
injury.
• Secure the workpiece. The grip of tensioning devices or a
vice is more secure than holding the workpiece only by
hand.
Wear protective gloves when changing the insertion
tools. The applied tools heat up during longer
operation.
Intended use
Only use the device PMTS 10-12V:
• For sawing and cutting
– Wood
– Plastic
– Plaster
– Non-ferrous metals
– Fixing elements
(e.g. screws, nails, clamps etc.)
• For processing soft wall tiles
• For sanding and scraping of small, dry areas
whilst adhering to the technical data.
We recommend using the power tool with original Trotec
accessories.
Improper use
Do not use the device PMTS 10-12V for:
• cutting up tiles
• sawing large screws or stainless steel
• processing workpieces requiring a continuous water
supply
Only use the device in weatherproof surroundings.
Personnel qualifications
People who use this device must:
• be aware of the dangers that occur when working with
electric devices in damp areas.
• have read and understood the operating manual, especially
the Safety chapter.
Personal protective equipment
Wear hearing protection.
Excessive noise can lead to hearing loss.
• Do not scrape moistened material (e.g. wallpaper) and
not on moist subsurfaces either. Water entering a power
tool will increase the risk of electric shock.
• Do not treat the surface to be processed with liquids
containing solvents. Toxic fumes may be produced
during scraping owing to the heat-up of the materials.
• Exercise particular caution when using scraper and
Wear eye protection.
With it you protect your eyes from splintering, falling
and flying pieces which could cause injuries.
Wear a protective mask.
It saves you from inhaling harmful dusts generated
when processing workpieces.
cutter. These tools are especially sharp involving a risk of
injury.
• Ensure sufficient ventilation when processing plastics,
paints, varnishes etc.
• Wait until the device has come to a standstill, before
putting it down.
Wear protective gloves.
They protect your hands from burns, crushing injuries
and skin abrasions.
Wear tight-fitting protective clothing.
This protects you from the draw-in and entanglement
hazard posed by rotating parts.
EN 4
cordless multi-function tool PMTS 10-12V
Residual risks
Warning of electrical voltage
Electric shock from insufficient insulation.
Check the device for damages and proper functioning
before each use.
If you notice damages, no longer use the device.
Do not use the device when the device or your hands
are damp or wet!
Warning
Make sure not to hit power, gas or water lines when
working with a power tool.
If necessary, use a pipe detector to check the wall you
want to drill in or slit open.
Warning
Risk of injuries caused by flying parts or bursting tool
heads.
Warning of electrical voltage
Work on the electrical components must only be
carried out by an authorised specialist company!
Warning of electrical voltage
Before any work on the device, remove the mains plug
from the mains socket and the battery from the device!
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Warning of electrical voltage
There is a risk of a short-circuit due to liquids
penetrating the housing!
Do not immerse the device and the accessories in
water. Make sure that no water or other liquids can
enter the housing.
Warning of explosive substances
Do not expose the battery to temperatures above 45
°C! Do not let the battery come into contact with water
or fire! Avoid direct sunlight and moisture. There is a
risk of explosion!
Warning of hot surface
The insertion tool might still be hot after the
application. Burn hazard when touching the insertion
tool.
Do not touch the insertion tool bare-handed!
Wear protective gloves!
Warning
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!
Warning
The device is not a toy and does not belong in the
hands of children.
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Caution
The tool release lever must be fully closed before
switching the device on, for insertion tools clamped
insufficiently or incorrectly could be catapulted out of
the tool holding fixture uncontrollably upon switch-on.
Caution
The tool release lever must be fully closed before
switching the device on, for otherwise the lever could
snap back upon switch-on.
Caution
Vibration emissions can cause a health hazard if the
device is used for an extended period of time or if it is
not properly handled and maintained.
Warning of sharp object
Parts of the saw blade are sharp. Risk of injuries if
handled without due care.
Wear protective gloves!
Warning
Toxic dusts!
The harmful / toxic dusts produced during operation
Caution
Keep a sufficient distance from heat sources.
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
pose of risk to the health of the operator and persons
in the vicinity.
Wear eye protection and a dust mask!
Warning
Do not process materials containing asbestos.
Asbestos is considered carcinogenic.
5 EN
cordless multi-function tool PMTS 10-12V
Information about the device
1
2
6
8
16
4
19
3
18
7
17
5
10
11
12
13
14
15
9
Device description
Using the wireless multi-function tool PMTS10-12V, no
additional power connection is required at your workplace.
Up to 19,000 times per minute the insertion tool moves to and
fro by 3.2° owing to the oscillating drive. This guarantees
precise working in a very confined space.
The integrated oscillation rate selection permits an optimally
adjusted exertion of force for each application.
Using the quick-release system you can exchange accessories
without tools in a matter of seconds.
The anti-vibration handle ensures optimum guidance and
vibration-damped working.
It is suited particularly well for working close to or lined up with
the edge.
To avoid an excessive formation of dust and dirt during grinding
work, simply connect the convenient dust extraction system
(included in the scope of delivery) to a vacuum cleaner.
The integrated LED work lamp offers an improved illumination of
the workpiece or working surface.
For yet more application possibilities you can of course combine
your multi-function tool with further accessories, e.g. the
original Trotec accessory set for bathroom restoration.
Device depiction
No. Designation
1 Tool release lever
2 On/off switch
3 3-stage battery level indication
4 Setting wheel oscillation rate selection
5 LED work light
6 Charger
7 Green battery LED (quick charger ready for operation)
8 Segment saw blade HSSSM85/20
for wood and metal
9 Plunge-cut saw blade BIMCS75/25
for wood, plastic, GRP, light metal and non-ferrous metal
10 Plunge-cut saw blade HCSCS95/40
for wood, plasterboard and soft plastics
11 Scraping knife HCSSC80/30
for removing tile adhesive, silicone, mortar, paint
residues
12 Velcro®-backed triangle sandpaper
(12x wood, 6x metal)
13 Dust extraction
14 Delta sanding plate
15 Anti-vibration handle
16 Battery
17 Release buttons
18 Red battery LED (battery charging)
19 Tool holder with clamping screw
EN 6
cordless multi-function tool PMTS 10-12V
Loading...