How it Works
Trotec
Loading...
PIDS 10-20V
Table of contents
Loading...

Trotec PIDS 10-20V, PIWS 10-20V Original Instructions Manual

PIDS 10-20V
EN
ORIGINAL INSTRUCTIONS
CORDLESS IMPACT DRIVER
TRT-BA-PIDS10-20V-TC2018-68-001-EN

Table of contents

Wear hearing protection
Information marked with this symbol indicates that you should wear hearing protection.

Notes regarding the instructions

Symbols

Wear safety glasses
Information marked with this symbol indicates that you should wear eye protection.
Wear protective clothing
Information marked with this symbol indicates that you should wear protective clothing.
Wear protective gloves
Information marked with this symbol indicates that you should wear protective gloves.
You can download the current version of the instructions and the EUdeclaration of conformity via the following link:
PIDS 10-20V
https://hub.trotec.com/?id=42992
Warning of electrical voltage
This symbol indicates dangers to the life and health of persons due to electrical voltage.
Warning of explosive substances
This symbol indicates dangers to the life and health of persons due to potentially explosive substances.
Warning
This signal word indicates a hazard with an average risk level which, if not avoided, can result in serious injury or death.
Caution
This signal word indicates a hazard with a low risk level which, if not avoided, can result in minor or moderate injury.
Note
This signal word indicates important information (e.g. material damage), but does not indicate hazards.
Info
Information marked with this symbol helps you to carry out your tasks quickly and safely.

Safety

Read this manual carefully before starting or using the device. Always store the manual in the immediate vicinity of the device or its site of use!
Warning Observe all the safety warnings, instructions,
illustrations and technical data provided with this power tool.
Failure to follow the instructions below may result in electric shock, fire and/ or serious injury.
Save all warnings and instructions for future reference.
The term power tool used in the safety warnings refers to both mains-operated and battery-powered electric tools (with/ without power cable).
Follow the manual
Information marked with this symbol indicates that the instructions must be observed.
2 EN
cordless impact driver PIDS 10-20V
General Power Tool Safety Warnings – Work area safety
• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust
or fumes.
• Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
General Power Tool Safety Warnings – Electrical safety
• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep the cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is
unavoidable, use a residual current device(RCD) protected supply. Use of an RCD reduces the risk of
electric shock.
General Power Tool Safety Warnings – Personal safety
• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
• If devices are provided for the connection of dust
extraction and collection facilities, ensure these are connected and properly used. The use of a dust
extraction system may reduce dust-related hazards.
• Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool safety principles. A careless action can cause severe
injury within a fraction of a second.
General Power Tool Safety Warnings – Power tool use and care
• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and / or
the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
EN 3
cordless impact driver PIDS 10-20V
• Maintain power tools and accessories carefully. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by
poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
• Keep handles and gripping surfaces dry, clean and free from oil and grease. Slippery handles and gripping surfaces do not allow for safe handling and control of the tool in unexpected situations.
General Power Tool Safety Warnings – Battery tool use and care
• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with another battery pack.
• Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
• When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from
the battery. Avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
• Do not use a damaged or modified battery. Damaged or modified batteries can behave unexpectedly and lead to fires, explosions or injuries.
• Do not expose a battery to fire or excessively high temperatures. Exposure to fire or temperatures above 130°C (265°F) may cause an explosion.
• Follow all the instructions for charging and never
charge the battery or the cordless tool outside the temperature range specified in the operating instructions. Incorrect charging or charging outside of the
permissible temperature range can destroy the battery and increase the risk of fire.
General Power Tool Safety Warnings – Service
• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
• Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.
Device-specific safety warnings for cordless impact drivers/ cordless impact wrenches
• Secure the workpiece. The grip of tensioning devices or a vice is more secure than holding the workpiece only by hand.
• Hold the power tool firmly. When tightening or loosening screws, high reaction torques can occur temporarily.
• Hold power tool by insulated gripping surfaces when
performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting
a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock.
• For any work on the device, as well as during transport
or storage, set the switch for the rotational direction to centre position (locked). This prevents unintentional
starting of the power tool.
• Regularly check the tool holder for wear or damage.
• Only start a percussive power tool while holding it
against the workpiece.
• Wait until the power tool has come to a standstill, before putting it down.

Intended use

Only use the device PIDS 10-20V:
• for screwing in and loosening screws
• for tightening and loosening nuts
whilst adhering to the technical data.
We recommend using the power tool with original Trotec accessories.

Improper use

The device is not intended for drilling.

Personnel qualifications

People who use this device must:
• have read and understood the instructions, especially the Safety chapter.
4 EN
cordless impact driver PIDS 10-20V

Personal protective equipment

Wear hearing protection.
Excessive noise can lead to hearing loss.
Wear eye protection.
With it you protect your eyes from splintering, falling and flying pieces which could cause injuries.
Wear protective gloves.
They protect your hands from burns, crushing injuries and skin abrasions.
Wear tight-fitting protective clothing.
This protects you from the draw-in and entanglement hazard posed by rotating parts.

Residual risks

Warning of electrical voltage
Electric shock from insufficient insulation. Check the device for damages and proper functioning before each use. If you notice damages, no longer use the device. Do not use the device when the device or your hands are damp or wet!
Warning of electrical voltage
Work on the electrical components must only be carried out by an authorised specialist company!
Warning of electrical voltage
Before any work on the device, remove the mains plug from the mains socket and the battery from the device! Hold onto the mains plug while pulling the power cable out of the mains socket.
Warning
The device is not a toy and does not belong in the hands of children.
Warning
Risk of suffocation! Do not leave the packaging lying around. Children may use it as a dangerous toy.
Warning
Before the device is switched on, the accessory must be firmly locked in place in the tool holder. If the accessory is not properly locked, it can be catapulted out of the tool holder uncontrollably upon switch-on.
Caution
Vibration emissions can cause a health hazard if the device is used for an extended period of time or if it is not properly handled and maintained.
Caution
Keep a sufficient distance from heat sources.
Note
If you store or transport the device improperly, the device may be damaged. Note the information regarding transport and storage of the device.
Note
Only change the rotational direction when the device is at a standstill! Otherwise the device might be damaged.
Warning of electrical voltage
There is a risk of a short-circuit due to liquids penetrating the housing! Do not immerse the device and the accessories in water. Make sure that no water or other liquids can enter the housing.
Warning of explosive substances
Do not expose the battery to temperatures above 45°C! Do not let the battery come into contact with water or fire! Avoid direct sunlight and moisture. There is a risk of explosion!
Warning
Dangers can occur at the device when it is used by untrained people in an unprofessional or improper way! Observe the personnel qualifications!
EN 5
cordless impact driver PIDS 10-20V
Loading...
+ 10 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use