Troposair HE-15072 User Manual

Owner’s ManualOwner’s Manual

Captiva

Model No:
HE-15072

These instructions contain 5 pages:

Page 1: Foreword
Page 2: Unpack and inspect parts contained, and pre-installation notes
Page 3: Hanging system installation
Page 4: Wiring connections and Canopy and Blade installation
Page 5: Light/Cover installation and Remote Setting

Toll Free 1-855-676-7247

WARNING: Read and follow these instructions carefully and be mindful of all warnings shown throughout.

Net Weight

6.6 KGS

7.8 LBS

READ AND SAVE THESE INSTRUCTIONS

WARNING : TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY
TO PERSONS, PLEASE OBSERVE THE FOLLOWING:

To ensure success of installation, be sure read these instructions and review the

1.]
diagrams thoroughly before beginning.

2.]

To avoid possible electric shock, be sure electricity is turned off at the main
power box before wiring.

All electrical connections must be made in accordance with local codes, ordinances
and/or the National Electrical Code. If you are unfamiliar with the methods of installing
electrical wiring and products, secure the services of a qualified and licensed
electrician as well as someone who can check the strength of the supportive ceiling
members and make the proper installations and connections.

3.]

Make sure that your installation site will not allow rotating fan blades to come into
contact with any object. Blades should be at least 7 feet from the floor when fan is in
operation.

4.]

If possible, mount ceiling fan on a ceiling joist - the joist must be able to support the
motion and weight of the moving fan. If the fan will be mounted on a ceiling outlet box,
a 4” x 2 1/8” deep METAL octagon box is required; one UL listed as “suitable for fan
support”. The box and its supporting members must not be able to twist or work loose.
DO NOT USE PLASTIC BOXES. Installation on a concrete ceiling should be
performed by qualified personnel.

5.]

Blades should be attached after motor housing is hung and in place. Fan motor
housing should be kept in carton until ready to be installed to protect its finish. If you
are installing more than one ceiling fan, make sure that you do not mix fan blade sets.

6.]

After making electrical connections, spliced conductors should be turned upward and
pushed carefully up into the outlet box. The wires should be spread apart with the
grounded conductor and the equipment-grounding conductor on one side of the outlet
box and the “HOT” wires on the other side.

7.]

Electrical diagrams are for reference only. Light kits that are not packed with the fan
must be UL/ETL listed and should be installed per the light kit’s installation instructions.

8.]

After fan is completely installed, check to make sure that all connections are secure to
prevent fan from falling and/or causing damage or injury.

9.]

The fan can be made to work immediately after installation. The bearings are
adequately charged with grease, so that, under normal conditions, further lubrication
should not be necessary.

10.]

The fan must be turned off and stopped before reversing fan direction.

11.]

This fan is suitable for sloped ceiling.

12.]

This fan is electrically reversible.

13.]

This fan includes a light.

14.]

This fan is controlled by remote control.

15.]

This fan is suitable for indoor use.