TRNDlabs BEAM User Manual

BEAM

USER GUIDE

2

Welcome to the world of

TRNDlabs products!

TRNDlabs products are design focused

electronics, engineered to combine

ulmate performance and aesthecs.

WWW.TRNDLABS.COM

3

PACKAGE CONTENTS

Lightning to Micro USB Adapter

BEAM Powerbank

USB Charging Cable

4

FUNCTIONS

LED Indicator Light

Micro USB Plug

Lightning to Micro
USB Adapter

Micro USB Port

Lightning to Micro USB
Adapter Holder

5

SPECIFICATIONS

59 grams (2.08 ounces)
100 mm (l) x 62 mm (w)
2500 mAh

Weight
Size
Capacity

6

Connect the USB Charging Cable to a USB port 1. Now connect the
Micro USB plug of the USB Charging Cable to the Micro USB port of
your BEAM 2. The blinking LED light indicates the BEAM Powerbank
is charging. When the baery is fully charged, the LED light turns green.

CHARGING

1

2

1 2

7

CONNECTING

To connect BEAM to a mobile device, simply connect the Micro USB plug

1

of BEAM to the mobile device. For an iOS device, apply the addional
iOS Micro USB Adapter 2 onto the Micro USB plug and connect it with
the iOS device.

1 2

8

TROUBLESHOOTING

BEAM is not charging?

The charging cable is not
inserted properly.

BEAM is already fully
charged.

Charging oen interrupted?

The charging current is
too much (over-current
protecon).

Reconnect BEAM

9

SAFETY PRECAUTIONS

• Do not use BEAM in temperatures below -20 °C or above 40 °C or

in a humidity higher than 85%.

• Place BEAM at room temperature when charging.

• Store BEAM in a dry place. Never store it somewhere moist.

• Do not try to alter or disassemble BEAM. If there is a problem with

BEAM, contact the retailer for further assistance.

• When not in use, charge BEAM at least once every 3 months, to

avoid loss of baery life.

• Keep away from high voltage devices or re.

• This product is not a toy, please keep away from children.

10

FCC INFORMATION

This device complies with part 15 of the FCC Rules. Operaon is subject
to the following two condions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operaon. Changes
or modicaons not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

11

www.trndlabs.com

The contents of this document are subject to change.

Download the latest version from

www.trndlabs.com.

If you have any quesons about this document, please contact TRNDlabs

by sending a message to [e-mail].

© 2016 TRNDlabs. All rights reserved.

WWW.TRNDLABS.COM