Triumph 5560 LT, 5560 Product Spec Sheet
Triumph 5560 LT
21-5/8" Programmable
Hydraulic Paper Cutter with Air
Tables and VRCut Software
Product Spec Sheet
TRIUMPH® 5560 / 5560 LT with
Programmable cutter with hydraulic blade and clamp drive,
power back gauge, digital touchpad, and IR safety light beams
on front table. 5560 LT model equipped with front and rear air
tables (available by special order only).
Specifications
Cutting width, inches
Cutting height, inches
Narrow cut, inches
Length behind blade, inches
Electrical requirements
Motor output, horsepower
Dimensions (D x W x H), inches
Shipping weight, pounds
1
20 amp dedicated line required
2
width with side tables is 64 inches
3
shipping weight with side tables is 1,008 pounds, (1,052 LT)
* with false clamp
21 5/8
3 3/4 (3 5/8*)
1 1/4 (2 3/8*)
22 7/16
115 V, 60 Hz
2
55 x 422 x 54
9703 (1,0143 LT)
1
VRCut is a groundbreaking software solution designed to automate the cutting
workow by promoting an ecient and error-free cutting process from start to
nish. VRCut intelligently bridges the gap between pre-press and the nishing
process, allowing operators of any experience level the ability to cut with
condence on select Triumph cutters.
Comprehensive SCS safety package: patented EASY CUT electronic blade activation bars for true two-hand
operation; IR light beam safety curtain on front table; safety cover on rear table; lockable main switch; 24 volt
controls (low voltage); patented IDEAL safety drive; automatic blade and clamp return from every position; blade
changing device covers cutting edge of blade; blade depth adjustment from outside of machine; blade and cutting
stick can be changed without removing covers.
Hydraulic blade and clamp drive. Foot pedal for pre-clamping. Electric back gauge drive with touchpad for easy
programming. Digital measurement display (cm or inches) with multilingual operator guidance, accurate to
1/10 mm or 1/100 inch. Stores 99 programs with up to 99 steps in each (up to 15 repeat cuts can be integrated
as a single step). Pre-programmed for standard paper sizes. Memory key for repeat cuts. Automatic SET
function for reference measurement and EJECT function for pushing out paper. Self-diagnostic system with
error indication on display. Electronic hand wheel with variable speed control for manual back gauge setting.
Clamp pressure is fully adjustable between 1,900 and 3,800 psi. False clamp plate. Bright, LED optical cutting
line. Stainless steel work surface. High quality, German HSS blade. Precision swing cut blade movement.
Aluminum blade carrier and clamp bar. Adjustable blade guides. All-metal construction. Mounted on casters.
Includes easy-access tool holder and paper blocking tool. Optional side tables increase work surface.
MyBinding.com
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920
Loading...