Triumph 45-6090W Instruction Manual

1

For Customer Service Call 1-888-996-2729

© 2016 Escalade S por t s

1-88 8 - 9 9 6 - 2 7 2 9

F AX: 1-866-873-3535

[e-mail]

W e strive to ensure that our produc t s are of the highest quality

and free of manufacturing defec t s or missing p ar t s. Howeve r , if

you have any problems with your new product,

DO NOT RETURN IT T O THE S T OR E ,

please contact us toll free @:

Or w r i t e t o :

Escalade Sport s

Customer Service Departmen t

P .O. B o x 88 9

Evan sville I N 4770 6

When con t ac ting Escalade S por t s please provide your model numbe r , date code (i f
appli cable ), and pa rt nu mbe r i f reque sting a repla c e men t pa rt. The s e nu mbe rs a re
lo c a ted on the p rodu ct, pa ckaging , and in thi s owne rs manual .

Y our Model Number :

Please have your model number when inquiring about parts.

Date Code:

All Rights Reserved

Purchase Date:

PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE

45-6090W

2-45-6090W- -GR

IMPORTANT! READ EACH STEP
IN THIS MANUAL BEFORE YOU
BEGIN THE ASSEMBLY.

TWO (2) ADU L TS ARE REQUIRED T O ASSEMBLE

THIS PLAYMAKER DOUBLE SHOOTOUT

RE A D A N D FOLL O W A L L ASSE M B L Y , OP E R A TIO N , A N D

S A FE T Y I N S T R U C TI O N S C A R E F U L L Y . A T L E A S T T W O

ADULTS ARE NEEDED TO PUT THIS BASKETBALL

SHOOTOUT TOGETHER.

2

For Customer Service Call 1-888-996-2729

© 2016 Escalade S por t s

All Rights Reserved

Tools Needed (not provided):

Make sure you understand the following tips before you begin to assemble your
basketball shootout.

1.This game (with Mechanical Scoring Arm) can be played outdoors in dry weather

- but must be stored indoors.

2.Tighten hardware as instructed.

3.Do not over tighten hardware,as you could crush the tubing.

4.Some drawings or images in this manual may not look exactly like your product.

5.To prevent damage to the electronics or to your wall, do not place this unit any closer

than six inches from the wall.

!

WARNING:

1) Do not mix old and new batteries.

2) Do not mix alkaline, standard (carbon zinc), or rechargeable (ni-cad, ni-mh, etc.) batteries.

3) Do not dispose of batteries in fire, batteries may explode or leak.

T1-Allen Wrench (provided) Phillips Screwdriver Plyers

FEATURING “EZ FRAME ASSEMBLY AND QUICK ATTACH RIMS”.
THESE DESIGNS ARE CUSTOMER FRIENDLY AND WILL GREAT REDUCE ASSEMBLY TIME.

H1 - M6 x 35mm

Allen Head Bolt

(1 pc)

H4 - M6

Flat Washer

(11 pcs)

H5 - M6

Wing Nut

(11 pcs)

H6 - Plastic Bushing

(2 pcs)

H2 - M6 x 60mm

Allen Head Bolt

(2 pcs)

H3 - M6 x 25mm

Allen Head Bolt

(8 pcs)

3

For Customer Service Call 1-888-996-2729

© 2016 Escalade S por t s

All Rights Reserved

HARDWARE IDENTIFIER

(To Scale)

H7 - Wing Bolt

(1 pc)

H8 - M6

Lock Washer

(8 pcs)

T1 - Allen Wrench

(1 pc)

(Not to Scale)

4

For Customer Service Call 1-888-996-2729

© 2016 Escalade Sports

All RIghts Reserved.

PARTS IDENTIFIER (Not to Scale)

P1 - Left Lower
Tube Assembly
(1 pc)

P2 - Right Lower
Tube Assembly
(1 pc)

P3 - Left Middle
Tube Assembly
(1 pc)

P4 - Right Middle
Tube Assembly
(1 pc)

P5 - Front
Tube Assembly
(1 pc)

P6 - Upper
Tube (2 pcs)

P7 - Backboard
with Tubes Assembly
and Quick Attach Rim
Brackets (1 pc)

P8 - Ramp

Chute (1 pc)

5

For Customer Service Call 1-888-996-2729

© 2016 Escalade Sports

All RIghts Reserved.

PARTS IDENTIFIER (Not to Scale)

P9 - Electronic
Scorer (1 pc)

P10 - Electronic
Scorer Face Plate
(1 pc)

P11 - Mechanical
Scoring Arm
(2 pcs)

P12 - Rim (2 pcs)

P13 - Rim Net

(2 pcs)

P14 - Control Box

(1 pc)

ACCESORY IDENTIFIER (Not to Scale)

A1 - Air Pump

with Needle

(1 pc)

A2 - Basketball (4 pcs)

P15 - Locking Pin

(2 pcs)

P16 - Scoring

Control Box

Wire (1 pc)

6

For Customer Service Call 1-888-996-2729

© 2016 Escalade Sports

All RIghts Reserved.

STEP 1

PARTS REQUIRED:

1 pc - P1 Left Lower Tubes Assembly
1 pc - P2 Right Lower Tubes Assembly

Connect P2 - Right Lower Tubes Assembly to
P1 - Left Lower Tubes Assembly using Spring
Lock as shown in FIGURE 1.

NOTE: STEP 1, 2 and 3 requires
a second adult to help “hold”
the assemblies as being
assembled.

Remove all the parts from the box and verify that you have all of the listed parts as shown on the Parts List.

NOTE: STEP 1, 2 AND 3 requires a second adult to help “hold” the assemblies as being assembled
NOTE: When unfolding assemblies, be careful not to bend any parts.

Spring Lock

Spring Lock
face backside

STEP 2

PARTS REQUIRED:

1 pc - P3 Left Middle Tubes Assembly
1 pc - P4 Right Middle Tubes Assembly

Connect P4 - Right Middle Tubes Assembly to
P3 - Left Middle Tubes Assembly using Spring
Lock as shown in FIGURE 2.

NOTE: The only assembly in this step is
connecting this spring lock.

FIGURE 1

P2

P1

Spring Lock
face backside

Spring Lock

Spring Lock
face backside

P4

P3

FIGURE 2

WARNING / PINCH HAZARD!

Keep hands and fingers away from
hinge until STEP 3 is complete and
the hinge is in a controlled position.