TRITTON Cessna Rudder Pedals Pro Flight User Manual [en, de, es, fr, it]
PRO FLIGHT CESSNA® RUDDER PEDALS
Officially Licensed Cessna® Product
PRO FLIGHT CESSNA YOKE SYSTEM
FLIGHT YOKE AND 3 LEVER QUADRANT MODUAL
PRO FLIGHT CESSNA RUDDER PEDALS
FLIGHT PEDALS WITH TOE BRAKES
PRO FLIGHT CESSNA TRIM WHEEL
OFFICIALLY LICENSED CESSNA PRODUCT
OFFICALLY LICENSED CESSNA PRODUCTS
FROM SAITEK PRO FLIGHT AVILABLE AT: WWW.SAITEK.COM
68-17211-37759
ENGLISH
INTRODUCTION 5
DRIVERS AND SOFTWARE INSTALLATION FOR USERS OF WINDOWS® XP, 32- AND 64-BIT 5
DRIVERS AND SOFTWARE INSTALLATION FOR USERS OF WINDOWS® VISTA AND 7, 32- AND 64-BIT 6
HOW TO TEST AND ADJUST YOUR CONTROLLER 7
PROGRAMMING YOUR PRO FLIGHT CONTROLLER WITH SMART TECHNOLOGY PROGRAMMING SOFTWARE 9
FRANÇAIS
INTRODUCTION 15
INSTALLATION DES PILOTES ET DU LOGICIEL POUR LES UTILISATEURS DE WINDOWS® XP, 32 ET 64 BITS 15
INSTALLATION DES PILOTES ET DU LOGICIEL POUR LES UTILISATEURS DE WINDOWS® VISTA ET 7, 32 ET 64 BITS 16
COMMENT TESTER ET RÉGLER VOTRE CONTRÔLEUR 16
PROGRAMMATION DE VOTRE CONTRÔLEUR PRO FLIGHT AVEC LE LOGICIEL SMART TECHNOLOGY
PROGRAMMING SOFTWARE 20
DEUTSCH
EINFÜHRUNG 25
TREIBER- UND SOFTWARE INSTALLATION FÜR BENUTZER VON WINDOWS® XP, 32- AND 64-BIT 25
TREIBER- UND SOFTWARE INSTALLATION FÜR BENUTZER VON WINDOWS® VISTA UND 7 32-BIT UND 64-BIT 26
TESTEN UND EINSTELLEN IHRES CONTROLLERS 28
AUSFÜHREN DER SMART TECHNOLOGY PROGRAMMING SOFTWARE 30
ITALIANO
INTRODUZIONE 35
I INSTALLAZIONE DEI DRIVER E DEL SOFTWARE PER UTENTI DI WINDOWS® XP A 32 E A 64 BIT 35
INSTALLAZIONE DEI DRIVER E DEL SOFTWARE PER UTENTI DI WINDOWS® VISTA E 7, A 32 E A 64 BIT 36
COME VERIFICARE E REGOLARE IL CONTROLLER 37
PROGRAMMAZIONE DEL CONTROLLER PRO FLIGHT CON IL SOFTWARE SMART TECHNOLOGY 40
ESPAÑOL
INTRODUCCIÓN 45
INSTALACIÓN DE DRIVERS Y SOFTWARE PARA USUARIOS DE WINDOWS® XP, 32- Y 64-BIT 45
INSTALACIÓN DE DRIVERS Y SOFTWARE PARA USUARIOS DE WINDOWS® VISTA Y 7, 32- Y 64-BIT 46
CÓMO PROBAR Y AJUSTAR TU MANDO 47
PROGRAMAR SU MANDO PRO FLIGHT CON EL SOFTWARE DE PROGRAMACIÓN SMART TECHNOLOGY 50
RUDDER AXIS
With self-centering mechanism
GB
//
Avec mécanisme d’autocentrage
FR
//
Mit selbstzentrierendem Mechanismus
DE
//
Con meccanismo autocentrante
IT
//
Con mecanismo autoajustable
ES
//
AUTHENTIC CESSNA PEDALS
GB
//
With independent toe brakes
Avec axes de freins de palonnier indépendants
FR
//
Mit unabhängigen Zehenbremsen
DE
//
Con freni indipendenti
IT
//
Con frenos de dedos independientes
ES
//
ADJUSTABLE TENSION
GB
//
Adjust the resistance to suit any plane
Ajustez la résistance pour s’adapter à tous les avions
FR
//
Stellen Sie den Widerstand für Ihr jeweiliges Flugzeug ein
DE
//
Per regolare la resistenza, in modo da adattarsi a qualsiasi aereo
IT
//
Ajusta la resistencia para que se adapte a cualquier avión
ES
//
4
INTRODUCTION
The Pro Flight Cessna Rudder Pedals are solid 3-axis rudder pedals designed to
maximize realism by enabling foot control of the rudder and brake functions in PC
ight simulation software. Saitek and Cessna have teamed up to provide you with the
most authentic ight controls for your home cockpit. This product has been built using
genuine design data from the world’s most popular plane manufacturer. The Pro Flight
Cessna Rudder Pedals work with a wide variety of ight simulators, and functions
perfectly with other products in the Pro Flight Range.
Features:
• Independent left and right brake axes
• Rudder axis
• Self-centering with adjustable damping
• Silent, smooth action for optimum control and precision
• High-quality construction for long life
• Smart Technology (ST) Programming Software allows gamers to congure their
controls to suit their preferred gaming style, and to save the congurations as
personal proles
DRIVERS AND SOFTWARE INSTALLATION FOR USERS OF WINDOWS® XP, 32- AND 64-BIT
1. With your computer powered on, close down any programs that are currently
running, and then insert the Installation CD into your CD-ROM drive.
2. When the Welcome screen appears, click Next to continue. If the CD does not run
automatically, select Start from the Windows Taskbar, then Run, then type D:\Setup.
exe into the Run window’s text entry eld, and then click OK (assuming D:\ is the
letter of your CD-ROM drive).
3. After reading the Disclaimer, select the I accept the terms of the Disclaimer option
and click Next to continue.
ENGLISH
5
4. At the Driver Setup screen, if you haven’t already done so, plug the USB cable into
one of your computer’s USB ports, and then click Next.
5. At the Driver Setup screen, click Next to test your controller.
6. When the Saitek Controller screen appears, try out all of your controller’s controls to
determine if it is working properly. When you have nished, click OK.
7. In the following Software Setup screen, click Next and follow the on-screen
instructions. At this point you will be asked to install such features as the
Programmable Support for Mouse, Programmable Support for Keyboard
and Programmable Hotkeys (these are important components of the programming
software and are required).
8. If you are asked if Windows can connect to Windows Update to search for software,
choose No, not at this time. Continue to click Next and Finish to accept the
installation.
9. Upon completion of the installation, you have the option to Run Prole Editor, which
will give you a view of the programming environment. If you do not wish to see the
Prole Editor at this point, uncheck the box and click Finish to complete the
installation.
DRIVERS AND SOFTWARE INSTALLATION FOR USERS OF WINDOWS® VISTA AND 7,
32- AND 64-BIT
1. With your computer powered on, close down any programs that are currently
running, and then insert the Installation CD into your CD-ROM drive.
2. When the Welcome screen appears, click Next to continue. If the CD
does not run automatically, select Start from the Windows Taskbar, then Run, then
type D:\Setup.exe into the Run window’s text entry eld, and then click OK
(assuming D:\ is the letter of your CD-ROM drive).
3. After reading the Disclaimer, select the I accept the terms of the Disclaimer option
and click Next to continue.
6
4. At the Driver Setup screen, if you haven’t already done so, plug the USB cable into
one of your computer’s USB ports and then click Next.
5. At the Driver Setup screen, click Next to test your controller.
6. When the Saitek Controller screen appears, try out all of your controller’s controls to
determine if it is working properly. When you have nished, click OK.
7. In the following Software Setup screen, click Next and a pop-up box will appear
asking if you “want to trust software from Saitek.” Click yes, and then click Next.
8. Upon completion of the installation, you have the option to Run Prole Editor,
which will give you a view of the programming environment. If you do not wish to
see the Prole Editor at this point, uncheck the box and click on Finish to complete
the installation.
ENABLING YOUR CONTROLLER IN GAMES
Most games support game controllers, which you can enable by using the controller
options menu within the Main Menu of the game itself. If you are having trouble with
this, or are not sure if the game supports game controllers, please refer to the game’s
user manual for assistance.
HOW TO TEST AND ADJUST YOUR CONTROLLER
To test your controller, follow these steps:
Windows XP and Vista users need to navigate via the Start button to: Control Panel >
Game Controllers.
Windows 7 users will need to navigate via the Start button to: Games > Tools > Input
Devices.
Open the Game Controllers window and the Saitek Pro Flight Cessna Rudder pedals
should appear. Click Properties to bring up the test screen. Click on the Test tab.
Moving your rudder pedals should result in a response in this screen; if there is a
response you know that the Rudder Pedals are functioning correctly.
7
ENGLISH
Click on the Deadzones tab of the Properties window. You can adjust the deadzones
(i.e., the distance of pedal travel which doesn’t result in a corresponding in-game rudder
movement) of the Pro Flight Cessna Rudder Pedals by clicking on the deadzone axes
and dragging the deadzone indicators to the desired level. To test the new settings,
either click on the Test tab or play a ight sim game.
SETUP IN FLIGHT SIM X AND FLIGHT SIM 2004
The Rudder Pedals have three axes, one for the rudder and two foot pedal axes that
8
are used for the toe brakes. Due to the way in which Flight Sim detects the pedals, they
need to be correctly congured before you can start getting the most out of them.
Start by opening FSX and clicking to Settings > Controls > Control Axes (in FS2004 go
to Settings > Assignments > Joystick Axes). Select the Rudder Pedals in the Controller
Type menu (Joystick Type for FS2004).
• Double-click the event called Brake (left axis) and depress the left brake when the
Change Assignment window appears. Left toe will appear in the notication window,
and then click OK.
• Repeat the process for Brake (right axis) and the right pedal.
• Ensure that there is a tick in the Reverse column boxes for both brake axes.
• Finally, double-click Rudder Axis and perform the rudder movement, so that the
Change Assignment window detects the rudder axis. These are the only three axes
that should be set to the pedals; if there are any more in the list, delete them using the
Delete Joystick Assignment command.
Now that the axes are set, go to the settings page called Calibration (Sensitivities in
FS2004). Select the Rudder Pedals and then select Advanced Controls. Ensure that the
sensitivities for both brake axes are set to 75-80% and that the null zones are set to 0%
for both. The rudder should be set to 50-75% sensitivity with a small null zone of about
5%.
Before you load a ight, you will need to disable Auto-Rudder. To do this, click to Settings > Realism and ensure that the Auto Rudder box does not have a tick inside it.
You should now be good to go. Load up a ight and when the plane is stationary on
the runway, depress the pedals, and then release them. You should see the brake
announcement in the corner of your screen. If all is well, the indicator will appear and
then disappear when the brake is released. If the brakes stay on, go back to Settings >
Controls > Control Axes (in FSX/2004), and remove the ticks from the reverse box for
the brake pedals.
9
ENGLISH
PROGRAMMING YOUR PRO FLIGHT CONTROLLER WITH SMART TECHNOLOGY PROGRAMMING
SOFTWARE
INTRODUCING SMART TECHNOLOGY PROGRAMMING SOFTWARE
Smart Technology (ST) Programming Software is the software supplied to congure
your controller for enhanced functionality. ST delivers a powerful set of features,
allowing you to program your device with the ultimate conguration for total interaction.
Despite a level of sophistication previously unseen in the market, the software remains
simple and intuitive to use.
FEATURES OF SMART TECHNOLOGY PROGRAMMING SOFTWARE:
• Quick and easy setup in any game
• Personalize the controller settings for your favorite games
• Congure your controller with an on-screen, high resolution model and interface
• Multiple setup options for each controller - ideal if a controller is used by several
people
• Program special moves with sophisticated timing features
• Special game setups available as “Proles” from the Saitek website and on the
Smart Technology CD
• Download the latest version of Smart Technology Programming Software from
the Saitek website
RUNNING THE SMART TECHNOLOGY PROGRAMMING SOFTWARE
A. Click on Start, then All Programs, and then look for Smart Technology in your list
of programs. Click on this and under this heading you will see another heading with
an icon saying Prole Editor. Click on this and the Smart Technology software will
open up.
B. Look on your desktop for the Smart Technology icon. Once found, double-click
and the Smart Technology software will load.
C. Right-click the controller icon next to your clock, and click Prole Editor from the
list.
10
Once the ST software has opened, you will be presented with a “tip” screen (if it’s the
rst time you have run the software). This screen gives useful information pertaining
to the prole software. If you do not wish to see this screen when you start the ST
software, uncheck the small check box in the corner of the tip screen. The tip box can
be closed by clicking on the OK icon in the bottom right corner. You can get the tip box
back by going to the support tab and clicking on SHOW STARTUP TIPS PAGE.
PRODUCT
The product page is the main screen that appears when the Smart Technology software
is rst opened (as shown above). Any Pro Flight hardware connected to your computer
will be automatically detected and displayed on this screen. Since they are always rst
in the list of connected hardware, the Pro Flight Rudder Pedals will always appear in
the software’s product page, although no Pro Flight hardware is physically connected to
your computer.
PROGRAMMING
From the programming tab, you can mimic your controller to directly copy any of the
keyboard commands that are used in your favorite games. The commands are then
saved in what we call a Prole. When you click on the programming tab, you will be
presented with a high resolution image of the controller you are going to program on the
left, and going down the right side of the screen you will see a list of command boxes
called “Cells.” For a detailed guide on the programming, go to the support tab and click
READ PROGRAMMING MANUAL.
SUPPORT
From the support tab, you can access the following features by clicking on them.
SHOW TIPS
Once clicked, the tip screen will appear; this is the same screen that appears the
very rst time you run the ST software and you can run through all tips from this
screen if desired.
11
ENGLISH
DOWNLOAD DRIVERS AND SOFTWARE
Clicking on this link will open your default browser and direct it to the download drivers
and software page.
DOWNLOAD GAME PROFILES
Clicking on this link will open your default browser and direct it to the download
proles page. From this page, choose your controller and a list of pre-made proles
that match all the latest games will appear.
READ ST PROGRAMMING MANUAL
The full ST programming manual will open in your default browser window.
CONTACT US
Clicking on Contact Us will open your default browser and direct it to the contact
information page; from here you can choose from a list of contacts.
EU DECLARATION OF CONFORMITY:
As required, certain of these products have been tested and conform to the requirements of the European Union Directives 2002/95/EC, 2002/96/EC, and 2004/108/EC.
Authorized signatory of the manufacturer is Mad Catz, Inc.,
7480 Mission Valley Road, Suite 101, San Diego, CA 92108.
12
ENGLISH
13
INTRODUCTION
Les pédales de gouverne de direction Cessna Pro Flight sont des pédales compactes
de direction selon 3 axes conçues pour optimiser le réalisme en permettant de contrôler
avec les pieds les fonctions de gouverne de direction et de freins dans les logiciels de
simulation de vol sur PC. Saitek et Cessna ont fait équipe pour vous proposer les
commandes de vol les plus réalistes pour votre cockpit à domicile. Ce produit a été
fabriqué en utilisant les données de conception authentiques du constructeur d’avions
le plus populaire au niveau mondial. Les pédales de gouverne de direction Cessna Pro
Flight sont compatibles avec un grand nombre de simulateurs de vol, et fonctionnent
parfaitement avec les autres produits de la gamme Pro Flight.
Features
• Axes de frein gauche et droit indépendants
• Axe de gouverne de direction
• Centrage automatique avec amortissement réglable
• Action silencieuse et souple pour un contrôle idéal et une précision optimale
• Construction avec des pièces métalliques de haute qualité pour une longue durée
de vie
• Le logiciel Smart Technology (ST) Programming Software permet aux joueurs de
congurer leurs commandes an qu’elles s’adaptent à leur style de jeu préféré, ainsi
que d’enregistrer les congurations dans des prols personnels
INSTALLATION DES PILOTES ET DU LOGICIEL POUR LES UTILISATEURS DE WINDOWS® XP,
32 ET 64 BITS
1. Lorsque votre ordinateur est allumé, fermez tous les programmes en cours de
fonctionnement, puis insérez le CD d’installation dans le lecteur de CD-ROM.
2. Lorsque l’écran de bienvenue apparaît, cliquez sur Next pour poursuivre. Si le CD
ne s’exécute pas automatiquement, sélectionnez Start dans la barre des tâches
Windows, puis Run, puis saisissez D:\Setup.exe dans le champ de saisie de la
fenêtre Run, puis cliquez sur OK (en supposant que D:\ correspond à la lettre de
14
votre lecteur de CD-ROM).
3. Après avoir lu l’avis d’exclusion de responsabilité, sélectionnez l’option I accept the
terms of the Disclaimer et cliquez sur Next pour poursuivre.
4. Dans l’écran de conguration du pilote, si vous ne l’avez pas encore fait, branchez
le câble USB dans l’un des ports USB de l’ordinateur, puis cliquez sur Next.
5. Dans l’écran de démarrage du pilote, cliquez sur Next pour tester le contrôleur.
6. Lorsque l’écran du contrôleur Saitek apparaît, essayez toutes les commandes de
votre contrôleur an de déterminer s’il fonctionne correctement. Lorsque vous avez
terminé, cliquez sur OK.
7. Dans l’écran Software Setup suivant, cliquez sur Next et suivez les instructions
à l’écran. À ce stade, il vous sera demandé d’installer des fonctions telles
que Programmable Support for Mouse, Programmable Support for Keyboard et
Programmable Hotkeys (il s’agit de composants importants du logiciel de
programmation et ils sont nécessaires).
8. S’il vous est demandé si Windows peut se connecter à Windows Update pour
rechercher le logiciel, choisissez No, not at this time. Poursuivez pour cliquer sur
Next et Finish pour accepter l’installation.
9. À la n de l’installation, il vous est proposé l’option Run Prole Editor, qui vous
donnera un aperçu de l’environnement de programmation. Si vous ne souhaitez
pas voir l’éditeur de prol à ce stade, décochez la case et cliquez sur Finish pour
achever l’installation.
INSTALLATION DES PILOTES ET DU LOGICIEL POUR LES UTILISATEURS DE WINDOWS® VISTA
ET 7, 32 ET 64 BITS
1. Lorsque votre ordinateur est allumé, fermez tous les programmes en cours de
fonctionnement, puis insérez le CD d’installation dans le lecteur de CD-ROM.
2. Lorsque l’écran de bienvenue apparaît, cliquez sur Next pour poursuivre. Si le CD
ne s’exécute pas automatiquement, sélectionnez Start dans la barre des tâches
Windows, puis Run, puis saisissez D:\Setup.exe dans le champ de saisie de la
15
FRANÇAIS
Loading...