Page 1
www.ttco.com • 800-237-0946
2-107
2
Specialty Application Photoelectric SensorsClear Label Sensor
Clear Label Sensor
Page 2
www.ttco.com • 800-237-0946
2-108
2
Specialty Application Photoelectric Sensors Clear Label Sensor
Ultrasonic
CLEAR LABEL Sensor
TRI-TRONICS
®
introduces the very
first Ultrasonic Clear Label Sensor with a High
Performance Graphic OLED display. The OLED display
provides the user with an unprecedented view of the
sensor's performance, options, program modes, and
helpful simple instructions never before offered in a
Clear Label Sensor. Designed into the sensor are all the
Ease-of-Use characteristics that have made Tri-Tronics'
sensors so well known in the industry.
The Ultrasonic Clear Label Sensor is the answer to what
the industry has been asking for...
"a reliable, durable, high quality clear label sensor that
provides visual confirmation of proper setup and
function..." a simple solution, with the ability to
accurately adjust for repeatable and reliable
performance.
Now "CONFIDENTLY" walk away from the labeling line,
"KNOWING" the throughput is at peak performance and
trouble free.
Features
• OLED Alphanumeric Display
• 10 Bar Graphic Contrast Indicator
• Static and Dynamic Numerical Display
• One button AUTOSET (Gap Set)
• Tweak-able (Momentary Up/Down Adjustable)
• Available Timers and Delays
• Cable and Connector Version (M12 and M8)
• Removable Gap Plate
• High Speed (200µs) (1800'/548M per minute)
• Durable and Robust Housing
• Compatible with Existing Mounting Configurations
Benefits
• Easy to Set Up
• Highly Accurate and Precise
• Low Maintenance
• Affordable, Low-Cost Option
• Made in USA
• Durable and Reliable
Applications
• Label Rewinding
• Label Applying
• Clear, Paper, Foil, or Mylar Labels
• Splice Detection
• Fold or Crease Detection
Page 3
www.ttco.com • 800-237-0946
2-109
2
Specialty Application Photoelectric SensorsClear Label Sensor
Applications
SEAL
CREASE
TAP E
Double Sheet Detection Splice Detection
Clear Label Application Heat Seal Detection
High Speed Rewinding...Clear, Metal Foil, or Paper Labels Fold or Crease Detection
Page 4
www.ttco.com • 800-237-0946
2-110
2
Specialty Application Photoelectric Sensors Clear Label Sensor
(**Advanced Option)
Dynamic Set is a convenient and easy way to set up the CLS sensor. Once initiated, simply
pull labels and gaps through the sender receiver transducers and then push the Gap or Label
button to complete. This feature is also available via the remote set wire. Dynamic Set is
beneficial when holding the gap in place is not easily accomplished, or physical access to the
sensor is not practical.
The Auto Adjust feature is helpful in applications with diminishing conditions...such as dirty or
dusty environments, or with inconsistent label or web material thickness. This feature bumps
up the gain automatically in order to maintain a functional and repeatable contrast between
labels and gaps.
The Output Mode allows the user to decide which is more important to detect...the label or
the gap. The leading or trailing edge of labels may be more desirable to receive an output in
some applications than others. This option allows the user to make that determination and
provides flexibility in real world conditions.
For visual preference, the Display Orientation allows the user to flip the screen for a more
user-friendly visibility.
Menu Options
The Sensor Scope is also an Advanced Option and allows the user to visually see how the
sensor is detecting the target. Whether the labels or web materials are inconsistent, or noise
issues occur occasionally, this feature clearly shows the user exactly where the problems are
and how to resolve the issue quickly.
(**Advanced Option)
The Timer Mode is offered as an Advanced Option. This feature provides users with the
option to condition the output specifically for the application requirement.
Off Delay: Extends the Output Time.
On Delay: Extends the Input Time.
One Shot: Provides a defined Output "On" Time.
Debounce: Provides an Anti-Chatter timer.
Quick Reference was included as a way to visually instruct through the different set up
options. This feature also includes contact information for the factory.
Button Lockout is useful for maintaining a set up without worry. This is tamper-proof, and
reassures the continued performance of the sensor and up-time of the production line.
Page 5
www.ttco.com • 800-237-0946
2-111
2
Specialty Application Photoelectric SensorsClear Label Sensor
How to Specify
Features
OUTPUT INDICATORS
Red LED illuminates when when outputs are
ON
Flashes when short circuit or overload
detected
AUTOSET/GAP
_
BUTTON
1.Push and Hold with gap in view for 2
seconds for AUTOSET.
2.Tap for UP on Contrast Indicator, or reduce
threshold.
3.Change settings in MENU options
AUTOSET/LABEL
+
BUTTON
1.Push and Hold with label in view after GAP
AUTOSET on rare occasions when labels
have multiple layers.
2.Tap DOWN on Contrast Indicator, or
increase threshold.
3.Change settings in MENU options
OLED NUMERICAL DISPLAY
1.1 to 10 bar Contrast Indicator
2.Numerical display for threshold and
feedback number
3.Options Status Display: Button Lock or
Unlock ( ); auto adjust on/off (AUTO);
output in Gap( ) or on Label ( ).
4.View Menu Options
MENU BUTTON
1.Push and Hold for 1 second to enter Menu
Options.
2.Tap to scroll through Menu options.
3. Hold during power up for additional Menu
Options; Timers and Factory Diagnostics (or
sensor scope).
1.Select Sensor:
Ultrasonic Clear Label Sensor
2.Select Cable or Connector:
Blank = 6’ (1.8m) Cable
C = Connector M12, 5-Pin
(Standard)
3.Select Connector Type:
-1 = Standard M12 Connector
(see #2).
Includes both NPN and PNP
-1M8 = M8, 4-Pin Connector
NPN/PNP Software Selectable
-1M8LE = Wired like LERC
Ultrasonic Clear
Label Sensor
Blank = 6’ Cable
C = Connector
-1
-1M8
-1M8LE
Example:
CLS C -1
Hardware & Accessories
CLS-GP
Gap Plate
NOTE: The M12 version is not wired the same as LERRC-M12.
GEC-6
6' (1.8m)
GEC-15
15' (4.6m)
GEC-25
25' (7.62m)
RGEC-6
6' (1.8m)
right angle
RGEC-15
15' (4.6m)
right angle
RGEC-25
25' (7.62m)
right angle
4-Wire Nano Cable, M8
GEX-9
9’ (2.7m) Extension
GSEC-6
6’ (1.8m)
GSEC-15
15’ (4.6m)
GSEC-25
25’ (7.62m)
GRSEC-6
6’ (1.8m) right angle
GRSEC-15
15’ (4.6m) right angle
GRSEC-25
25’ (7.6m) right angle
GX-25
25’ (7.6m) extension
5-Wire Shielded MicroCable, M-12
Page 6
www.ttco.com • 800-237-0946
2-112
2
Specialty Application Photoelectric Sensors Clear Label Sensor
SUPPLY VOLTAGE
• 12 to 30 VDC
• Polarity Protected
Note: For use in Class 2 Circuits
CURRENT REQUIREMENTS
• 95mA @ 12 VDC, 45mA @ 30 VDC
DIGITAL OUTPUTS
• (1) NPN and (1) PNP open collector
output 150mA Max; <2V Residual
Voltage
(Note: On CLSC-1M8, NPN & PNP are
software selectable).
• All outputs are continuously short
circuit protected
REMOTE AUTOSET INPUT
• Momentary sinking or sourcing
input;
1.2mA max; Software Selectable
DIAGNOSTIC INDICATORS
• OLED Graphic Display - Includes
Contrast Indicator, Numerical
Display, Set Point and Trigger Point,
and all sensor options and modes.
• Red LED Output Indicator–
Illuminates when the sensor’s
output transistors are “ON”.
Note: If output LED flashes on power
up, a short circuit condition exists.
PUSHBUTTON CONTROL
• Three (3) push button controls
• Gap (for Gap AUTOSET)
• Label (for multi-layered labels)
• Menu (for accessing Options)
HYSTERESIS
• Dynamic – adjusted by AUTOSET
RESPONSE TIME
• 200µs
REPEATABILITY
• 125µs
AMBIENT TEMPERATURE
• 4°C to 50°C (39°F to 122°F)
RUGGED CONSTRUCTION
• Chemical resistant, high impact
Aluminum housing
• Waterproof ratings: NEMA 4X, 6P
and IP65
• Conforms to heavy industry grade
CE requirements
THRESHOLD SET
• 1-Point, 2-Point, or Dynamic
AUTOSET; manually or remotely.
THRESHOLD ADJUST
• Manual or AUTO Adjust
OUTPUT TIMERS
• On Delay, Off Delay, One Shot, or
Debounce (Advanced Option,
software selectable).
CONNECTOR
• M12 5-Pin, M8 4-Pin, or 6’ (1.8m)
Shielded Cable
RoHS Compliant
Product subject to change without notice
Specifications
(2)
(2)
30 VDC
12 To
M8 Wiring
Output
NPN (SINKING) INPUT ACTIVATED BY CONNECTING TO NEGATIVE
PNP (SOURCING) INPUT ACTIVATE D BY CONNECTING TO POSITIVE
(2) -
(1) -
NPN (SINKING) OUTPUT LOAD TERMINATED TO POSITIVE
PNP (SOURCING) OUTPUT LOAD TERMINATED TO NEGATIVE
(1)
LOAD
Pos
Remote
Autoset
Neg
Brown* (1)
Red
Green
Black* (4)
Wh ite
White* (2)
Blue* (3)
Black
LOAD
LOAD
Blue
Gray* (5)
Pos
NPN
(Sink)
PNP
(Sou rce)
Neg
Remote
Autoset
30 VDC
12 To
M12 and Cable Wiring
Brown (1)
Black (4)
White (2)
Blue (3)
Wht
Load
NPN
Load
PNP
(2)
Brn
(1)
Blk
(4)
Blu
(3)
Gry
(5)
0.250"
[6.3m m]
0.551"
[14.0m m]
0.360"
[9.1m m]
2.767"
[70.3m m]
0.767"
[19.5mm]
3.113"
[79.1mm]
0.158"
[4.0mm]
3.893"
[98.9m m]
2X Ø0.205"
[2X 5.20mm]
OUTPUTOUTPUT
S
O
T
U
A
T
E
A
G
P
A
L
B
E
L
E
N
M
U
OUTPUT
S
O
T
U
A
T
E
A
G
P
A
L
B
E
L
E
N
M
U
S
O
T
U
A
T
E
A
G
P
A
L
B
E
L
E
N
M
U
4.522"
[114.8 6mm]
4.332"
[110.0 3mm]
4.181"
[106.2 0mm]
Brown (1)
Black (4)
White (2)
Blue (3)
LOAD
LOAD
Pos
NPN
(Sink)
PNP
(Sourc e)
Neg
30 VDC
12 To
CLSC-1M8LE Wiring
M8 & M8LE
MODELS
M12
MODELS
CABLED
MODELS
M8 Male
Connector
1 - Positive
2 - Remote AUTOSET
3 - Negative
4 - Output
4
3
2
1
* - Sensors with connectors
1 - Positive
2 - NPN
3 - Negative
4 - PNP
5 - Rem ote AUTOSET
M12 Male
Connector
2
3
1
4
5
M8LE Male
Connector
1 - Positive
2 - NPN
3 - Negative
4 - PNP
4
3
2
1
0.472"
[12.0m m]
0.360"
[9.1mm ]
2X 6-32 Mounting
Holes, 0.150"
[3.8mm ] Deep
M8 & M8LE
MODELS
M12 MODELS
1.441"
[36.6m m]
0.850"
[21.6m m]
1.944"
[49.4m m]
2.022"
[51.4mm]
0.676"
[17.2mm]
1.110"
[28.2mm]
Connections and Dimensions Ultrasonic Clear Label Sensor
NOTE: Side and bottom mounting holes
are compatible with LER models.
Loading...