Page 1
PROFESSIONAL MOVING HEAD USER MANUAL
WALLY LPAR21
KEEP THIS MANUAL FOR FUTURE NEEDS
Page 2
- - XM340-V1.2 - A
1
Thank you for your patronage. We are confident that our excellent products and
service can satisfy you.
For your own safety, please read this user manual carefully before installing the
device.
Every person involved with the installation, operation and maintenance of this
device has to
- be qualified
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet
INTRODUCTION:
Thank you for having chosen this professional LED lighting.
You will see you have acquired a powerful and versatile device.
Unpack the device. Inside the box you should find:
1. The fixture device
2. One power cables
3. One XLR connection cable
4. One safety rope and this manual
Page 3
- - XM340-V1.2 - A
2
Belows are the optional accessories, please purchase from your local dealer if
needed
1.Barn-door
2.Frost filter
Please check carefully that there is no damage caused by transportation. Should
there be any, consult your dealer and don’t install this device.
DESCRIPTION OF THE DEVICE
Features
• 21x3W triple color LED
• Extremely Long Life: 100,000 hr and lower power consumption
·3 DMX channel modes: 3 /4 / 7 channels
• 3 operational modes: DMX-512, Master/Slave & Sound Active
• Switch-mode power supply
• Automatic power supply adaption between 100 and 240 Volts without power
selector
• DMX-controlled operation or stand alone operation with Master/Slave-function
• Strobe effect with 18 flashes per second and pulse effect
• General dimming and blackout for all LEDs
• Excellent color mixing and rainbow effect
• 4 digit LED display
• Preset program: 8 built in programs can be called up via DMX controller
Page 4
- - XM340-V1.2 - A
3
Overview
(1) Housing
(2) LEDS
(3) Floor-stand
(4) Menu-button
(5) Up-button
(6) Down-button
(7) Enter-button
(8) Power input
(9) DMX output
(10) DMX-input
Page 5
- - XM340-V1.2 - A
4
SAFETY INSTRUCTIONS
This device has left the factory in perfect condition. In order to maintain this
condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or
problems.
If the device has been exposed to temperature changes due to
environmental changes, do not switch it on immediately. The arising
condensation could damage the device. Leave the device switched off
until it has reached room temperature.
This device falls under protection-class I. Therefore it is essential that
the device be earthed.
The electric connection must carry out by qualified person.
The device shall only be used with rate voltage and frequency.
Make sure that the available voltage is not higher than stated at the end
of this manual.
Make sure the power cord is never crimped or damaged by sharp edges.
If this would be the case, replacement of the cable must be done by an
authorized dealer.
Always disconnect from the mains, when the device is not in use or
Page 6
- - XM340-V1.2 - A
5
before cleaning it. Only handle the power cord by the plug. Never pull
out the plug by tugging the power cord.
During initial start-up some smoke or smell may arise. This is a normal
process and does not necessarily mean that the device is defective, it
should decrease gradually.
Please don't project the beam onto combustible substances.
Fixtures cannot be installed on combustible substances, keep more than
50cm distance with wall for smooth air flow, so there should be no
shelter for fans and ventilation for heat radiation.
If the external flexible cable or cord of this luminaire is damaged, it shall
be exclusively replaced by the manufacturer or his service agent or a
similar qualified person in order to avoid a hazard.
Please be aware that damages caused by manual modifications to the
device are not subject to warranty. Keep away from children and
non-professionals.
GENERAL GUIDELINES
This device is a lighting effect for professional use on stages, in
discotheques, theatres, etc.
Page 7
- - XM340-V1.2 - A
6
This fixture is only allowed to be operated with the max alternating
current which stated in the technical specifications in the last page of this
manual, the device was designed for indoor use only.
Lighting effects are not designed for permanent operation. Consistent
operation breaks may ensure that the device will serve you for a long
time without defects. Do not shake the device.
Avoid brute force when installing or operating the device.
The device shall only be used complete with its protective shield.
While choosing the installation-spot, please make sure that the device is
not exposed to extreme heat, moisture or dust. The minimum distance
between light-output from the projector and the illuminated surface must
be more than 0.1 meter.
Operate the device only after having familiarized with its functions. Do
not permit operation by persons not qualified for operating the device.
Most damages are the result of unprofessional operation.
Please use the original packaging if the device is to be transported.
For safety reasons, please be aware that all modifications on the device
are forbidden.
If this device will be operated in any way different to the one described
in this manual, the product may suffer damages and the guarantee
becomes void. Furthermore, any other operation may lead to
short-circuit, burns, electric shock, lamp explosion, crash, etc.
Page 8
- - XM340-V1.2 - A
7
INSTALLATION INSTRUCTIONS
Mounting the device
The applicable temperature for the lignting is between -25°C to 45°C. Do not
use the lighting under or above the temperature.
The installation of the effect has to be built and constructed in a way that it can
hold 10 times the weight for 1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an
appropriate safety rope.
Never stand directly below the device when mounting, removing or servicing the
fixture.
The operator has to make sure the safety relating and machine technical
installations are approved by an expert before taking the device into operation for
the first time.
These installations have to be approved by a skilled person once a year.
Page 9
- - XM340-V1.2 - A
8
Cautions:
The effect should be installed outside areas where persons may reach it, walk by or
be seated.
Overhead mounting requires extensive experience, including amongst others
calculating working load limits, installation material being used, and periodic
safety inspection of all installation material and the device. If you lack these
qualifications, do not attempt the installation yourself. Improper installation can
result in bodily injury.
Before mounting make sure that the installation area can hold a minimum point
load of 10 times the device’s weight.
Connect the fixture to the mains with the power plug.
Page 10
- - XM340-V1.2 - A
9
Overhead rigging
Screw the bolt of the clamp into the hold of the bracket, and tighten the screw
underneath.
Pull the safety-rope through the holes on the bracket of the base and over the
trussing system or a safe fixation spot. Insert the end in the carabine and tighten the
safety screw.
DMX-512 control connection
Connect the provided XLR cable to the female 3-pin XLR output of your controller
and the other side to the male 3-pin XLR input of the LED lighting. You can chain
multiple LED lighting together through serial linking. The cable needed should be
two core, screened cable with XLR input and output connectors. Please refer to the
diagram below.
Page 11
- - XM340-V1.2 - A
10
DMX-512 connection with DMX terminator
For installations where the DMX cable has to run a long distance or is in an
electrically noisy environment, such as in a discotheque, it is recommended to use
a DMX terminator. This helps in preventing corruption of the digital control signal
by electrical noise. The DMX terminator is simply an XLR plug with a 120 Ω
resistor connected between pins 2 and 3,which is then plugged into the output XLR
socket of the last fixture in the chain. Please see illustrations below.
OPERATION
1： Display menu：
Page 12
- - XM340-V1.2 - A
11
0
MODE
ADDR
VALU
A001~AXXX (AXXX)
DMX address setting
SLAV
ON/OFF (SLAV)
Slave setting
EBOC
ON/OFF
Change DMX address
via external controller
RUN
AUTO
ALON (AU-A)
Automatic Run in Stand Alone
MAST (AU-M)
Automatic Run as Master
SOUN
ALON (SO-A)
Sound-controlled Run
in Stand Alone
MAST (SO-M)
Sound-controlled Run as Master
DISP
VALU
D–XX D-00 (DXXX)
Display the DMX 512
value of each channel
RDIS
ON/OFF
Reverse display
CLDI
ON/OFF
Shut off LED display
1
SET
MIC
M-XX M-70
Mic sensitivity
CHAN
3CH / 4CH / 7CH
Set channel mode
AUTO
Clos/Hold/Auto/
Audi
No DMX Status
FANS
HIGH/AUTO
Fan’s mode select
LODA
ON/OFF
Restore factory settings
VER
V-1.0~V-9.9
Software version
2
ADJU
TEST
T–01~T–07
Test function of each channel
3
TIME
MATI
0000~9999(hours)
Fixture running time
LATI
0000~9999(hours)
Lamp running time
CLMT
ON/OFF
Clear fixture time
4
EDIT
STEP
S–01 ~S–48
Steps of Program Run
REC.
RE.XX
Auto Save Scene
SC01
~ SC48
C–01~C–07
0 1 XX(00~FFH)
07 XX(00~FFH)
Edit the channels of each scene
TIME
XXXX(000.2s~199.8s)
Time for each scene
CNIN
ON/OFF
Edit program via controller
Page 13
- - XM340-V1.2 - A
12
Main functions:
- Main menu 0
1. Press [MENU] to enter the main menu "MODE" (display flashing)
2. Press [ENTER] and select "ADDR", “RUN” or "DISP" by pressing [UP] or
[DOWN] button.
3. Press [ENTER] for selecting the desired sub menu.
- DMX address setting, Slave setting
- DMX address setting
With this function, you can adjust the desired DMX-address via the Control Board.
1. Select “VALU” by pressing [UP] or [DOWN] button.
2. Press [ENTER], adjust the DMX address by pressing [UP] or [DOWN]
button.
Page 14
- - XM340-V1.2 - A
13
3. Press [ENTER] to confirm or pressing [MENU] to return to main menu.
- Slave setting
With this function, you can define the device as slave.
1. Select “SLAV” by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows “ON” or “OFF”.
3. Press [UP] to select “ON” if you wish to enable this function or press [DOWN]
to select “OFF” if you don’t.
4. Press [ENTER] to confirm or press [MENU] to return to main menu.
-DMX address setting via controller
With this function, you can adjust the desired DMX-address via an external
controller.
This function can only be activated when the DMX-value of all other channels is
set to "0" on the
controller.
Select “EBOC” by pressing [UP] or [DOWN].
Press [ENTER], the display shows “ON” or “OFF”.
Press [UP] to select “ON” if you wish to enable this function or [DOWN] to select
“OFF” if you don’t.
Press [MENU] to confirm.
Press [ENTER] in order to return to the main menu.
- Program Run, Master setting
With the function "RUN", you can run the internal program. You can set the
number of steps under Step. You can edit the individual scenes under Edit. You
can run the individual scenes either automatically (AUTO), i.e. with the adjusted
Page 15
- - XM340-V1.2 - A
14
Step-Time or sound-controlled (SOUN). The selection "ALON" means Stand
Alone-mode and "MAST" that the device is defined as master.
1. Select "AUTO" or "SOUN" by pressing [UP] or [DOWN] button.
2. Press [ENTER] for selecting the desired extension menu.
3. Select "ALON" or "MAST" by pressing [UP] or [DOWN] button.
4. Press [ENTER] to confirm or Press [MENU] to return to the main menu.
- Display the DMX-value, Reverse display, Shut off LED display
- Display the DMX 512 value of each channel
With this function you can display the DMX 512 value of each channel.
1. Select "VALU" by pressing [UP] or [DOWN] button.
2. Press [ENTER] to confirm; the display shows“D-00”. In this setting, the
DMX-adjustment of every channel
Page 16
- - XM340-V1.2 - A
15
will be displayed.
3. Press [UP] or [DOWN] button in order to select the desired channel. If you
select “D-12” the display will only
show the DMX-value of the 12th channel.
4. Press [ENTER] to confirm or Press [MENU] to return to the main menu.
5. The display shows "D- XX”, “X” stands for the DMX-value of the selected
channel.
- Reverse display
With this function you can rotate the display by 180°.
1. Select "RDIS" by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows “ON” or “OFF”.
3. Press [UP] to select “ON” if you wish to enable this function or press
[DOWN] button to “OFF” if you
don’t; the display will rotate by 180°.
4. Press [ENTER] to confirm or Press [MENU] to return to the main menu.
- Shut off LED display
With this function you can shut off the LED display after 2 minutes.
1. Select "CLDI" by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows “ON” or “OFF”.
3. Press [UP] to select “ON” if you wish to enable this function or press
[DOWN] button to “OFF” if you don’t.
4. Press [ENTER] to confirm or Press [MENU] to return to the main menu.
Page 17
- - XM340-V1.2 - A
16
- Main menu 1
1. Press [MENU] to enter the main menu (display flashing).
2. Press [UP] or [DOWN] button. to select “SET”.
- Mic sensitivity
With this function you can adjust the sensitivity of the microphone.
1. Select “MIC” by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows “M-XX”, “XX” stands for the number
from 0 to 99.
3. Press [ENTER] to confirm or Press [MENU] to return to the main menu.
- Set channel mode
With this function you can set channel mode.
1. Select “CHAN” by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows “3CH”, “4CH” or “7CH”.
3. Press [UP] or [DOWN] button to select “3CH”, “4CH” or “7CH”
, the default is “7CH”.
4. Press [ENTER] to confirm or Press [MENU] to return to the main menu.
-Automatic Run by no DMX
With this function you can automatic run the device by no DMX.
Page 18
- - XM340-V1.2 - A
17
1. Select “AUTO” by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows “CLOS”, “HOLD”, “AUTO” or “AUDI”.
3. Press [UP] or [DOWN] button to select “CLOS”, “HOLD”, “AUTO” or
“AUDI”, the default is “HOLD”.
4. Press [ENTER] to confirm or Press [MENU] to return to the main menu.
- Fan’s mode select
With this function you can select the Fan’s mode.
1. Select “FANS” by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows “HIGH” or “AUTO”.
3. Select “HIGH” or “AUTO” by pressing [UP] or [DOWN] button.
4. Press [ENTER] to confirm or Press [MENU] to return to the main menu.
- Restore factory settings
With this function you can restore the factory settings of the device. All settings
will be set back to the default values (shaded). Any edited scenes will be lost.
1. Select “LODA” by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows “ON” or “OFF”.
3. Press [UP] to select “ON” if you wish to enable this function or press
[DOWN] button to “OFF” if you don’t.
4. Press [ENTER] to confirm or Press [MENU] to return to the main menu.
- Software version
With this function you can display the software version of the device.
1. Select “VER” by pressing [UP] or [DOWN] button.
2. Press [ENTER], The display will show “V-XX”, "XX" stands for the version
Page 19
- - XM340-V1.2 - A
18
number, such as the display may also show,"V-1.0","V-9.9"etc.
3. Press [ENTER] to confirm or Press [MENU] to return to the main menu.
- Main menu 2
1. Press [MENU] to enter the main menu (display flashing).
2. Press [UP] or [DOWN] button to select “ADJU”.
- Test function of each channel
With this function you can test each channel on its (correct) function.
1. Select “TEST” by pressing [UP] button.
2. Press [ENTER], the display shows “T-XX”, “X” stands for the channel
number.
3. The current channel will be tested.
4. Select the desired channel by pressing [UP] or [DOWN] button.
5. Press [ENTER] to confirm or Press [MENU] to return to the main menu.
- Main menu 3
Page 20
- - XM340-V1.2 - A
19
1. Press [MENU] to enter the main menu (display flashing).
2. Press [UP] or [DOWN] button to select “TIME”.
- Fixture running time
With this function you can display the running time of the device.
1. Select “MATI” by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows “XXXX”, “X” stands for the number of
hours.
3. Press [ENTER] to confirm or Press [MENU] to return to the main menu.
- Lamp running time
With this function you can display the running time of the lamp.
1. Select “LATI” by pressing [UP] button.
2. Press [ENTER], the display shows “XXXX”, “X” stands for the number of
hours.
3. Press [MENU] to return to the main menu.
- Clear fixture time
With this function you can clear the running time of the device.
1. Select “CLMT” by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows “ON” or “OFF”.
3. Press [UP] to select “ON” if you wish to enable this function or press
[DOWN] button to “OFF” if you don’t.
4. Press [ENTER] to confirm or Press [MENU] to return to the main menu.
Page 21
- - XM340-V1.2 - A
20
- Main menu 4
1. Press [MENU] to enter the main menu (display flashing).
2. Press [UP] or [DOWN] button to select “EDIT”.
- Define the number of
steps in Run
With this function you can define
the number of steps in the Program
Run.
1. Select “STEP” by pressing [UP]
or [DOWN] button.
2. Press [ENTER], the display
shows “S-XX”, “X” stands for the
total amount of steps you want to
save, so you can call up to 48 scenes
in “RUN”. For example if the “XX”
is 05, it means that “RUN” will run
the first 5 scenes you saved in
“EDIT”.
3. Press [ENTER] to confirm or
Press [MENU] to return to the main
menu.
-Auto Save
With this function you can automatic save the number of steps in the Program Run.
1. Select “REC” by pressing [UP] or [DOWN] button.
Page 22
- - XM340-V1.2 - A
21
2. Press [ENTER], the display shows “RE.XX”, “XX” stands for the number
from 1 to 400.
3. Press [ENTER] to confirm or Press [MENU] to return to the main menu.
- Editing the channels of the individual scenes
With this function you can edit the program to be called up in Run.
Notation: In the scene "SC01-SC48", the before 16 scenes are defaulted to
the presupposed scenes, the specific colors as follows:
Order
Color
Red cost
Blue cost
Green cost
1
Red
255
0 0 2
Green
0
255
0 3 Blue
0 0 255
4
Cyan
0
255
255
5
Magenta
255
0
255
6
Yellow
255
255
0 7 Orange
255
133
0 8 Purple
133
10
255
9
Lime
110
255
34
10
Pink
255
10
133
11
Light Blue
10
133
255
12
Light Green
94
255
28
13
Skin Tone
255
204
111
14
Steel Blue
153
204
255
15
Warm White
255
255
153
16
Cool White
255
255
255
Page 23
- - XM340-V1.2 - A
22
a) Editing via the Control Board
1. Select “SC01” by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows “SCXX”, “X” stands for the scene no. to
be edited.
3. Change the scene no. by pressing [UP] or [DOWN] button.
4. Press [ENTER], the display shows “C-X”, “X” stands for the channel no.
Such as “C-01”, it means you are editing channel 1 of the selected scene.
5. Select the channel no. you would like to edit by pressing [UP] or [DOWN]
button.
6. Press [ENTER] to enter editing for the selected channel , the fixture reacts to
your settings. The display shows the DMX value of the edited channel. Such as
“11XX”, it stands for in the channel 11 of the editing scene, the DMX value is XX ,
XX is a hexadecimal number value “01-FF”.
7. Adjust the desired DMX value by pressing [UP] or [DOWN] button.
8. Press [ENTER] in order to edit other channels of this scene.
9. Repeat steps 5-9 until you finish setting all the DMX values for all channels of
this scene.
10. Once all the channels completed, the display will flash “TIME” .
11. Press [ENTER] to edit the time needed, the display shows “TXXX” , “XXX”
stands for the time needed to run the current scene, value “001-999”. E.g., “002”
means you need 0.4ms (002*0.2ms) to run the current scene. Adjust the desired
time by pressing [UP] or [DOWN] button.
12. Press [ENTER] to save the settings for the scene you are editing, the display
will change to the next scene automatically.
13. Repeat step 3-14 to edit and other scenes, you can edit and save a maximum of
48 scenes.
14. Press [MENU] to exit. The number of steps can be defined under “STEP” and
the scenes can be called up under “RUN” .
Page 24
- - XM340-V1.2 - A
23
b) Editing via the external controller
Call up the first scene in your controller now.
1. Select “SC01” by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows “SC01”.
3. Press [ENTER], the display shows “C-01”.
4. Select "CNIN" by pressing [UP] or [DOWN] button.
5. Press [ENTER], the display shows "OFF".
6. Press [UP] or [DOWN] button .the display shows "ON".
7. Press [ENTER], the display shows "SC02". You successfully downloaded the
first scene.
8. Adjust the Step-time as described above under point 12.
9. Call up the second scene in your controller now.
10. Repeat steps 5-11 until all desired scenes are downloaded.
11. Press [MENU] to exit. The number of steps can be defined under “STEP” and
the scenes can be called up under “RUN”
Page 25
- - XM340-V1.2 - A
24
2: INSTRUCTIONS ON USE:
DMX channel´s functions and their values (7 DMX channels):
Mode/Channel
Value
Function
3CH
4CH
7CH
NA
NA
1
Rainbow:
0-10
No function
11-220
Rainbow colours
221-255
Crossfading colours from slow to fast
1 1 2
Red :
0-255
Red ( 0-Black , 255-100% Red )
2 2 3
Green:
0-255
Green ( 0-Black , 255-100% Green )
3 3 4
Blue:
0-255
Blue ( 0-Black , 255- 100% Blue )
NA
NA
5
Shutter, strobe:
0-31
Led trun off
32-63
Led turn on
64-95
Strobe effect slow to fast
96-127
Led turn on
128-159
Pulse-effect in sequences
160-191
Led turn on
192-223
Random strobe effect slow to fast
224-255
Led turn on
NA 4 6
General dimming
0
Blackout
1-255
Dimming(1%-100%)
NA
NA
7
Internal programs:
0-99
No Function
Page 26
- - XM340-V1.2 - A
25
100-119
Internal program 1
120-139
Internal program 2
140-159
Internal program 3
160-179
Internal program 4
180-199
Internal program 5
200-219
Internal program 6
220-239
Internal program 7
240-255
Internal program 8
Instructions for installing the barn-door and frost filter:
For this device, the barn door and the frost filter can be installed separately or
together.
1.When only install the frost filter, use the rotating clips on the lens cover to fix it.
2.When only install the bar door, loose the 2 M4 screws on the lens cover, put on
the bar door and tighten the screws.
3.When install the bar door and frost filter together, loose the 2 M4 screws, put on
the frost filter and the bar door one by one, then tighten the screws.
Page 27
- - XM340-V1.2 - A
26
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and
moistened cloth. Never use alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations
are only to be carried out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by
authorized dealers only in order to avoid hazards.
Should you have further questions, please contact your dealer.
INSTALLATION
This device is only constructed for a standing installation. The device must only be
installed absolutely planar at a vibration-free, oscilation-free and fire-resistant
location. Make sure that the device is installed absolutely planar by using a
water-level.
TECHNICAL SPECIFICATIONS
Power supply: AC 100V-240V~，50 Hz / 60Hz
Power consumption: max. 80 W
Packing dimensions: 40 x 30 x 48 CM
Net weight: 7 KGS
Gross weight: 10KGS
Remark: errors and omissions for every information given in this manual except. All information
is subject to change without prior notice.
Loading...