PROFESSIONAL MOVING HEAD USER’S MANUAL
V 1200
KEEP THIS MANUAL FOR FUTURE NEEDS
For your own safety, please read this user manual carefully before installing the device.
Keep this device away from rain and moisture !
Unplug mains lead before opening the housing.
Every person involved with the installation, operation and maintenance of this device has to:
-be qualified
-follow carefully the instructions of this manual
INTRODUCTION:
Thank you for having chosen this professional moving head.
You will see you have acquired a powerful and versatile device.
Unpack the device. Inside the box you should find: the fixture device, a power cable, an
XLR connection cable, a safety cable and this manual. Please check carefully that there is no damage
caused by transportation. Should there be any, consult your dealer and don’t install this device.
Features
• pan 540°, tilt 265°
• colors :
•
color wheel1 with 4 dichroic glass panes, 2 correction-filter + 1 UV-filter
• color wheel2 with 6 dichroic glass panes, for a total of 7 colors
• static gobo wheel has 5 static gobos plus open with different speed gobo shaking
• rotating gobo wheel has 5 rotating gobos plus open, all gobos can be easily replaceable and gobo
indexing
• strobe effect : 0~13 flashes per second or random strobe
• Stepless Zoom
• automatic program
• display : digital address and function setting
• High speed pan & tilt movements
• Control board with 4-digit display and foil-keyboard for adjusting the DMX-starting address,
Pan/tilt-Reverse, Program, Reset, lamp on/off, operating hours and etc
• digital display can be turn 180° reverse to fit for different installation position local or remote
resetting
• lamp switches ON/OFF locally
• auto test for all functions
• value of each DMX-channel can be displayed
- １ - GS-SMS-Y1200-V1.0-02NR
• Editable program :
edit and save the program to the incorporated EEPROM through the front control panel or external
controller; can save maximum 48 scenes, and run the saved program by the “run” menu from the
front control panel
SAFETY INSTRUCTIONS
CAUTION
Be very careful during installation. Since you will be working with a dangerous
voltage you can suffer a life-threatening electric shock when touching live wires.
This device has left the factory in perfect condition. In order to maintain this condition and to ensure
a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
IMPORTANT
Damages caused by the disregard of this user manual are not subject to warranty.
The dealer will not accept liability for any resulting defects or problems.
If the device has been exposed to temperature changes due to environmental changes, do not switch
it on immediately. The arising condensation could damage the device. Leave the device switched off
until it has reached room temperature.
This device falls under protection-class I. Therefore it is essential that the device be earthed.
The electric connection must carry out by qualified person.
Make sure that the available voltage is not higher than stated at the end of this manual.
Make sure the power cord is never crimped or damaged by sharp edges. If this would be the case,
replacement of the cable must be done by an authorized dealer.
Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle
the power cord by the plug. Never pull out the plug by tugging the power cord.
During initial start-up some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective, it should decrease gradually.
- ２ - GS-SMS-Y1200-V1.0-02NR
CAUTION
Never touch the device during operation!
The housing may heat up
CAUTION
Never look directly into the light source,
as sensitive persons may suffer an epileptic shock.
Please be aware that damages caused by manual modifications to the device are not subject to
warranty. Keep away from children and non-professionals.
GENERAL GUIDELINES
This device is a lighting effect for professional use on stages, in discotheques, theatres, etc.
This fixture is only allowed to be operated with the max alternating current which stated in the
technical specifications in the last page of this manual, the device was designed for indoor use only.
Lighting effects are not designed for permanent operation. Consistent operation breaks may ensure
that the device will serve you for a long time without defects. Do not shake the device.
Avoid brute force when installing or operating the device.
While choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. The minimum distance between light-output from the
projector and the illuminated surface must be more than 0,5 meter.
Always fix the fixture with an appropriate safety cable if you use the clamp to hang up the fixture.
When fixing the device on a raised-from-the- ground support, be sure to use no less than screws and
nuts of M10 x 25 mm and insert them in the pre-arranged screw holes in the base of the fixture.
If you use the quick lock cam in hanging up the fixture, please make sure the 4 quick lock fasteners
turned in the quick lock holes correctly.
Operate the device only after having familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional
operation.
Please use the original packaging if the device is to be transported.
- ３ - GS-SMS-Y1200-V1.0-02NR
For safety reasons, please be aware that all modifications on the device are forbidden.
If this device will be operated in any way different to the one described in this manual, the product
may suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to
short-circuit, burns, electric shock, lamp explosion, crash, etc.
INSTALLATION INSTRUCTIONS
a) Installing or replacing the lamp
h a higher wattage. They generate higher temperatures than which the device was designed for.
For the installation, you need one
MSR 1200 SA GY 22 lamp ;
Procedure :
1) Unscrew the 4 screws marked Y, X, W and Z on the back of the housing, holding the plate where
the lamp is underneath.
2) Gently pull the socket holder of the lamp housing in the middle.
3) Carefully insert the lamp into the socket. Please remember there is only one way to insert the lamp.
Gently slide the lamp and its lamp holder back into place and fasten the 4 screws.
4) On the access plate there are 3 small screws marked A, B and C. which are used to adjust the lamp
holder in the lamp housing. You can adjust the 3 screws to fine-turn the position of the lamp to get
the maximum light output as shown below.
A
B
Please remember the lamp is not a hot-restrike type, you must wait for approximately 10
minutes after having turned off the lamp before you can turn it back on again.
Do not operate this device with open cover
b) Mounting the device
C
A
C
B
CAUTION
- ４ - GS-SMS-Y1200-V1.0-02NR
CAUTION
Please consider the EN 60598-2-17 and the other respective national norms during the
installation. The installation must only be carried out by a qualified person.
The installation of the effect has to be built and constructed in a way that it can hold 10 times the
weight for 1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate
safety cable.
Never stand directly below the device when mounting, removing or servicing the fixture.
The operator has to make sure the safety relating and machine technical installations are approved by
an expert before taking the device into operation for the first time.
These installations have to be approved by a skilled person once a year.
CAUTION
Before taking into operation for the first time,
the installation has to be approved by an expert.
Cautions:
The effect should be installed outside areas where persons may reach it, walk by or be seated.
When installing the device, make sure there is no highly
inflammable material within a distance of min. 0,5m
Overhead mounting requires extensive experience, including amongst others calculating
working load limits, installation material being used, and periodic safety inspection of all
installation material and the device. If you lack these qualifications, do not attempt the
installation yourself. Improper installation can result in bodily injury.
The electric connection must only be carried out by a qualified electrician.
Before mounting make sure that the installation area can hold a minimum point load of 10 times the
CAUTION
CAUTION
- ５ - GS-SMS-Y1200-V1.0-02NR
device’s weight.
Connect the fixture to the mains with the power plug.
installation via the Omega holders
Screw one clamp each via a M12 screw and nut onto the Omega holders.
Insert the quick-lock fasteners of the first Omega holder into the respective holes on the
bottom of the device. Tighten the quick-lock fasteners fully clockwise. Install the second
Omega holder.
Pull the safety-rope through the holes on the bottom of the base and over the trussing
system or a safe fixation spot. Insert the end in the carabine and tighten the safety screw.
- ６ - GS-SMS-Y1200-V1.0-02NR
DMX-512 control connection
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other
side to the male 3-pin XLR input of the moving head. You can chain multiple
Moving head together through serial linking. The cable needed should be two core, screened cable
with XLR input and output connectors. Please refer to the diagram below.
21
3
21
3
DMX-512 connection with DMX terminator
For installations where the DMX cable has to run a long distance or is in an electrically noisy
environment, such as in a discotheque, it is recommended to use a DMX terminator. This helps in
preventing corruption of the digital control signal by electrical noise. The DMX terminator is simply
an XLR plug with a 120 Ω resistor connected between pins 2 and 3,which is then plugged into the
output XLR socket of the last fixture in the chain. Please see illustrations below.
Address 39 Address 20 Address 1
Projector DMX start address selection
All fixtures should be given a DMX starting address when using a DMX signal, so that the correct
fixture responds to the correct control signals. This digital starting address is the channel number
from which the fixture starts to “listen” to the digital control information sent out from the DMX
controller. The allocation of this starting address is achieved by setting the correct number on the
display located on the base of the device.
- ７ - GS-SMS-Y1200-V1.0-02NR
You can set the same starting address for all fixtures or a group of fixtures , or make different
address for each fixture individually.
If you set the same address, all the units will start to “listen” to the same control signal from the same
channel number. In other words, changing the settings of one channel will affect all the fixtures
simultaneously.
If you set a different address, each unit will start to “listen” to the channel number you have set,
based on the quantity of control channels of the unit. That means changing the settings of one
channel will affect only the selected fixture.
In the case of the spot head, which is a 10 channel fixture, you should set the starting address of the
first unit to 1, the second unit to 20 (19 + 1), the third to 39 (20 + 19), and so on.
Note:
After switching on, the machine will automatically detect whether DMX 512 data is received or not. If the data is
received, the display will show "A.001" with the actually set address. If there is no data received at the DMX-input,
the display flashes "A001" with the actually set address. This situation can occur if:
- the 3 PIN XLR plug (cable with DMX signal from controller) is not connected with the input of the machine.
- the controller is switched off or defective, if the cable or connector is defective or the signal wires are swap in the
input connector.
Control Board
The Control Board offers several features: you can simply set the starting address, switch on and off the lamp, run
the pre-programmed program or make a reset.
The main menu is accessed by pressing the Mode/esc-button until the display starts flashing . Browse through the
menu by pressing the Up-button. Press the Enter-button in order to select the desired menu. You can change the
selection by pressing the Up-button. Confirm every selection by pressing the Enter-button. You can leave every
mode by pressing the Mode/esc-button . The functions provided are described in the following sections.
- ８ - GS-SMS-Y1200-V1.0-02NR
Function
Mode
Informat
ion
Personali
ty
Set DMX address
Value display
Set to Slave
Auto program
Music control
Time information
Product Info.
Software version IC01-Ver1.0 …..
Effect Set
Status choose
Lamp control
Display set
Init effect
Power on time XXXX Individual fixture running
Machine on time XXXX Fixture running time
Lamp on time XXXX Lamp running time
Lamp off time XXXX Lamp closed time
Clear Lamp time (“Please wait……”) Clear lamp time
System Temp
Near lamp Temp
Unit model
Unit code
Company WEB
Company Tel
XX-Ver9.9
IC
Pan Reverse
Tilt Reverse
Blackout moving
Blackout colors
Blackout Gobos
Scan fine select
Addr. via DMX
Master or Alone
Auto if no DMX
Music if no DMX
Lamp on or off
Lamp on by power on
Lamp on via DMX
Lamp off via DMX
Lamp off if no DMX
Lamp ignited temp.
Max lamp off temp.
Display close time
Display intensity
PAN Moving
:
Save and Active
XX ℃
XXX℃
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
Master/Alone
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
XX
XX
05 M
20~99%
PAN Moving=XXX
:
(“Please wait……”)
DMX setting
DMX value display
Set to slave
Auto program
Music control
time
Ambient time Temp. Info.
Temp in lamp chamber
Unit model
Unit code
Company WEB
Company Tel
Software version of each IC
Reverse movement
Blackout while pan/tilt
moving or color/gobo wheel
moving
Add. resetable via DMX
Master/ Alnow switch
Auto run if no DMX
Music control if no DMX
Lamp on/off
Lamp on with power on
Lamp on via DMX
Lamp off via DMX
Lamp off if no DMX
Max. lamp on temp.
Max lamp off temp.
Display close time
LCD brightness
Initial effect position
- ９ - GS-SMS-Y1200-V1.0-02NR
Reset
function
Effect
Adjust
Users
Mode
Set
Edit
Program
Mic sensitivity
Reset default
Reset All
Reset Scan
Reset Colors
Reset Gobos
Reset Shutter
Reset Others
Test channel PAN Moving …… Automatically test the function
Lamp adjustment PAN Moving
Wheel adjustment Color wheel
User mode User A seetings
Preset User mode PAN
Select Programs Program 1
Edit program Program 1
Edit scenes Edit Scene 001
Auto scenes Rec. XX~XX Automated recording scenes
0~99%
ON/OFF
:
Save Active
:
Save and Active
User B settings
User C settings
:
Save and Active
:
Program 10
:
Program 10
~ Edit Scene 250
PAN Moving=XXX
:
(“Please wait……”)
Color wheel=XXX
:
(“Please wait……”)
PAN = CH NO.01
:
(“Please wait……”)
Select programs to be run
Program Test
Start step
End step
Input by outside
Save and Active
Secne Time
,Pan,Tilt,……
(“STEP
XX”)
Start
step=xxx
End
step=xxx
TIME=X
X.XS
Pan=xxx,
Sensitivity of Mic.
Restore factory settings
Reset all motors &return to home
Reset only motors for pan/tilt
Reset only motors for colors
Reset only motors for gobo
Reset only motors for shutter
and/or dimmer
Reset other motors
Lamp adjustment
Wheel adjustment
User’s mode
Preset User modes
Testing program
Program in loop
Save and exit
Save and automatically return
manual scenes edit
INSTRUCTIONS ON USE:
DMX channel´s functions and their values (19 DMX channels):
Channel 1 - Color Wheel 1:
0-13 Open / white
14-27 Light blue
28-41 Salmon pink
42-55 Blue
- １０ - GS-SMS-Y1200-V1.0-02NR
56-69 Yellow Green
70-83 Light Yellow
84-97 Magenta
98-111 Orange
112-127 Purple
128-187 Forwards rainbow effect from fast to slow
188-193 No rotation
194-255 Backwards rainbow effect from slow to fast
Channel 2 - Rotating gobos, cont. rotation :
0-14 Open
15-29 Rot. gobo 1
30-44 Rot. gobo 2
45-59 Rot. gobo 3
60-74 Rot. gobo 4
75-106 Gobo 1 shake slow to fast
107-138 Gobo 2 shake slow to fast
139-170 Gobo 3 shake slow to fast
171-202 Gobo 4 shake slow to fast
203-255 Rot. gobo wheel cont. rotation slow to fast
Channel 3 - Rotating gobo index, rotating gobo rotation :
0-127 Gobo indexing
128-187 Forwards gobo rotation from fast to slow
188-193 No rotation
194-255 Backwards gobo rotation from slow to fast
Channel 4 - Fixed Gobos :
0-14 Open
15-29 Fix gobo 1
30-44 Fix gobo 2
45-59 Fix gobo 3
60-74 Fix gobo 4
75-89 Fix gobo 5
90-113 Gobo 1 shake slow to fast
114-137 Gobo 2 shake slow to fast
138-161 Gobo 3 shake slow to fast
162-185 Gobo 4 shake slow to fast
186-209 Gobo 5 shake slow to fast
210-255 Fix gobo wheel cont. rotation slow to fast
- １１ - GS-SMS-Y1200-V1.0-02NR
Channel 5 - PAN movement 8bit :
Channel 6 - TILT movement 8bit :
Channel 7 - Speed pan/tilt movement:
0-14 max speed
15-225 max to min speed
226-235 blackout by movement
236-245 blackout by all wheel changing
246-255 no function
Channel 8 - prism/prisms macros:
0-25 open
26-51 3 facet prism
52-77 5 facet prism
78-103 7 facet prism
104-127 trapezoid prism
128-135 Macro 1
136-143 Macro 2
144-151 Macro 3
152-159 Macro 4
160-167 Macro 5
168-175 Macro 6
176-183 Macro 7
184-191 Macro 8
192-199 Macro 9
200-207 Macro 10
208-215 Macro 11
216-223 Macro 12
224-231 Macro 13
232-239 Macro 14
240-247 Macro 15
248-255 Macro 16
Channel 9 - Rotating prism index, rotating prism rotation :
0-127 Prism indexing
128-187 Forwards Prism rotation from fast to slow
188-193 No rotation
194-255 Backwards Prism rotation from slow to fast
Channel 10 - Shutter, strobe:
0-31 Shutter closed
32-63 Dimmer control (shutter open)
- １２ - GS-SMS-Y1200-V1.0-02NR
64-95 Strobe effect slow to fast
96-127 No function (shutter open)
128-159 Pulse-effect in sequences
160-191 No function (shutter open)
192-223 Random strobe effect slow to fast
224-255 No function (shutter open)
Channel 11 - Dimmer (intensity):
0-255 Intensity 0-100%
Channel 12 – Focus:
0-255 Continuous adjustment from far to near
Channel 13- Zoom:
0-63 Zoom 1
64-127 Zoom 2
128-191 Zoom 3
192-255 Zoom 4
Channel 14 – Iris:
0-191 Max. diameter to Min.diameter
192-223 Pulse closing fast to slow
224-255 Pulse opening slow to fast
Channel 15 - Color Wheel 2 :
0-13 Open / white
14-27
Red
28-41 Light blue
42-55 Pink
56-69 Dark Yellow
70-83 3200K correction filters
84-97 5600K correction filters
98-111
UV-filter
112-127 Green
128-187 Forwards rainbow effect from fast to slow
188-193 No rotation
194-255 Backwards rainbow effect from slow to fast
Channel 16 –Frost
0-191 Frost 0~100%
192-223 Pulse opening fast to slow
224-255 Pulse closing slow to fast
- １３ - GS-SMS-Y1200-V1.0-02NR
Channel 17 – Lamp on/off, reset, internal programs:
0-19 colour change normal by direction depend on distance
20-39 colour change to any position by direction depend on distance
40-59 Lamp on
60-79 Lamp switch off
80-99 Motor reset
100-119 Internal program 1
120-139 Internal program 2
140-159 Internal program 3
160-179 Internal program 4
180-199 Internal program 5
200-219 Internal program 6
220-239 Internal program 7
240-255 Internal program 8
Channel 18 – Pan fine 16bit
Channel 19 – Tilt fine 16bit
ERROR MESSAGE
When you turn on the fixture, it will make a reset first. The display may show “XXer” while there are problems
with one or more channels. “XX” stands for channel 1,2,3,5,6,7 who has the testing sensor for positioning .
For example, when the display shows “02Er”, it means there is some error in channel 2. If there are some errors on
channel 1, channel 2, channel 5 at the same time, you may see the error message “01Er”, “02Er”,”05Er” flash
repeated for 5 times, and then the fixture will generate a reset signal, all the stepper reset. If the fixture remain error
message after performing reset more than 3 times, it will detect whether the fixture has more than 3 errors. If the
fixture has more than 3 errors (including 3 errors), all the channels can not work properly; but if the fixture has less
than 3 errors, only the channels which have errors can not work properly, others can work as usual.
01Er:
(Color-wheel1 error) This message will appear after the reset of the fixture if the magnetic-indexing circuit
malfunctions (sensor failed or magnet missing) or the stepping-motor is defective (or its drive circuit on the main
PCB). The color wheel is not located in the default position after the reset.
02Er:
(Rotating gobo-wheel error ) This message will appear after the reset of the fixture if the magnetic-indexing circuit
malfunctions(sensor failed or magnet missing) or the stepping-motor is defective (or its drive circuit on the main
PCB). The rotating gobo-wheel is not located in the default position after the reset.
03Er
(Rotating gobo indexing error) This message will appear after the reset of the fixture and if the magnetic-indexing
circuit malfunctions (sensor failed or magnet missing) or the stepping-motor is defective (or its driver circuit on the
main PCB). The rotating gobo is not located in the default position after the reset.
04Er
(Static gobo-wheel error) This message will appear after the reset of the fixture if the yoke’s magnetic-indexing
- １４ - GS-SMS-Y1200-V1.0-02NR
circuit malfunction (sensor failed or magnet missing) or the stepping-motor is defective ( or its driving IC on the
main PCB). The Static gobo-wheel error is not located in the default position after the reset.
05Er
(PAN-yoke movement error) This message will appear after the reset of the fixture if the yoke’s magnetic-indexing
circuit malfunction (sensor failed or magnet missing) or the stepping-motor is defective ( or its driving IC on the
main PCB). The PAN-yoke is not located in the default position after the reset.
06Er:
(TILT-head movement error) This message will appear after the reset of the fixture if the head’s magnetic-indexing
circuit malfunctions (sensor failed or magnet missing) or the stepping-motor is defective (or its driving IC on the
main PCB). The TILT-head is not located in the default position after the reset.
08Er
(Prism-wheel error) This message will appear after the reset of the fixture if the yoke’s magnetic-indexing circuit
malfunction (sensor failed or magnet missing) or the stepping-motor is defective ( or its driving IC on the main
PCB). The Prism-wheel is not located in the default position after the reset.
09Er
(prism indexing error) This message will appear after the reset of the fixture if the yoke’s magnetic-indexing circuit
malfunction (sensor failed or magnet missing) or the stepping-motor is defective ( or its driving IC on the main
PCB). The prism indexing is not located in the default position after the reset.
12Er
(Focus error) This message will appear after the reset of the fixture if the yoke’s magnetic-indexing circuit
malfunction (sensor failed or magnet missing) or the stepping-motor is defective ( or its driving IC on the main
PCB). The Focus is not located in the default position after the reset.
13Er
(Zoom error) This message will appear after the reset of the fixture if the yoke’s magnetic-indexing circuit
malfunction (sensor failed or magnet missing) or the stepping-motor is defective ( or its driving IC on the main
PCB). The Zoom is not located in the default position after the reset.
14Er
(Iris error) This message will appear after the reset of the fixture if the yoke’s magnetic-indexing circuit
malfunction (sensor failed or magnet missing) or the stepping-motor is defective ( or its driving IC on the main
PCB). The Iris is not located in the default position after the reset.
15Er
(Color-wheel2 error) This message will appear after the reset of the fixture if the yoke’s magnetic-indexing circuit
malfunction (sensor failed or magnet missing) or the stepping-motor is defective ( or its driving IC on the main
PCB). The Color-wheel is not located in the default position after the reset.
CLEANING AND MAINTENANCE
The following points have to be considered during the inspection:
1) All screws for installing the devices or parts of the device have to be tightly connected and must
not be corroded.
2) There must not be any deformations on the housing, color lenses, fixations and installation spots
(ceiling, suspension, trussing).
1) Mechanically moved parts must not show any traces of wearing and must not rotate with
unbalances.
2) The electric power supply cables must not show any damage, material fatigue or sediments.
Further instructions depending on the installation spot and usage have to be adhered by a skilled
installer and any safety problems have to be removed.
- １５ - GS-SMS-Y1200-V1.0-02NR
CAUTION
Disconnect from mains before starting maintenance operation.
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never use
alcohol or solvents.
There are no serviceable parts inside the device except for the lamp. Please refer to the
instructions under “Installation instructions”.
Should you need any spare parts, please order genuine parts from your local dealer.
TECHNICAL SPECIFICATIONS
Power supply :
□208VAC,50Hz;□220VAC,50Hz;□230VAC,50Hz;□240VAC,50Hz;
□208VAC,60Hz;
Power consumption : max. 1500
Lamp : MSR 1200 SA GY 22 socket, Metal Halide;
Motors : 16 micro motors
Flight case dimensions : 65 x 60 x 72 cm
Net weight : 58 KGS;
Gross weight: 63 KGS (Carton packing) 98 KGS (Flight case packing);
Remark : errors and omissions for every information given in this manual excepted. All information is subject to change
without prior notice.
□220VAC,60Hz;□230VAC,60Hz;□240VAC,60Hz;
W:
- １６ - GS-SMS-Y1200-V1.0-02NR
Loading...