Page 1
E. Forma de dircecionar el proyector manualmente:
(Por favor lea el cuadro siguiente)
5
3
678 910
4
1 2
ON
ON OFF
1,2,3 4,5,6,7,8,9,10
4,5,6 1,2,3,7,8,9,10
7,8 1,2,3,4,5,6,9,10
7,9 1,2,3,4,5,6,8,10
1,9
(1,2),3,9
2,3,4,5,6,7,8,10
4,5,6,7,8,10
Encendido en color rojo
Encendido en color verde
Encendido en color azul
Transformacion automatica
Frecuencia de flahs de rojo,verde a azul
Cambio lento de color (Puede variarse is velocidad
Con los interruptores 1 y 2
Funcion:
F, Direccionamiento para trabajar con senal DMX:
(Por favor lea el cuadro siguiente):
5
3
678 910
4
1 2
ON
ON OFF
1,10 2,3,4,5,6,7,8,9
2,10 1,3,4,5,6,7,8,9
1,2,10 3,4,5,6,7,8,9
3,10 1,2,4,5,6,7,8,9
........
Direccionamiento de un proyector como principal y otro u otros como exclavos:
Todos los proyectores tienen que estar dirceionados para DMX y colocados en serie con el canal
El resto de proyectores con selecon DMX en ei canal 1.
........................
Para elegir el canal 1
Para elegir el canal 2
Para elegir el canal 3
Para elegir el canal 4
Repetir estos pasos para elegir el numero de canal
Funcion:
USER MANUAL
MANUAL DE USUARIO
TR-LED1020
DMX-LED COLOR PICKER
Proyector Par 36 LED
Este proyector utiliza 4 canales DMX:
Canal FUNCION::
Canal1 -------------- Dimmer/Strobe
Canal 2 -------------- Rojo
Canal 3 -------------- Verde
Canal 4 -------------- Azul
CARACTERISTICAS TECNICAS
Voltage AC230V/50Hz Fuse: 0.5A
Power 6W max encendido completo ( RGB)
Beam Angle : 60
Embalaje indiviadual
Embalaje: 1 Proyector por cada caja.
Medidas 19.5x14x14cm
Peso 1/0.8Kg
Cajas completas
Embalaje : 8 proyectores en cada caja
Medidas 41x30x30cm
Peso 9/8Kg
Read kindly this user manual before using the machine
Lea atentamente este manual antes de utilizar el aparato
Page 2
A. Package
DMX-LED COLOR PICKER x 1
USER Manual x 1
B. Installation
Please hang this light into the suitable place with suitable angle (if operate this light in external place,
please remember to get some water-proof cover to protect them)
To connect the cable and put into power, then the light stay in the status to receive the operating
signal like: music, Automatic, DMX512 etc. Take note: Please cut off the power line if you will not
operate it for a certain time.
To connect the signal cable, plug one side into IN socket in the back of light and plug another side
into OUT signal connector in the DMX512 board, (signal input: 1=>Ground, 2=>data-, 3=>data+ )
NEXT
<32PCS
C Function
Connecting the device
1. Power supply: AC 230V / 50Hz
2. Fuse: 5 x 20mm F0.5A
3. Signal input: XLR connector connected with a DMX512
control panel.
4. Signal output: XLR connector connected with next light.
5. DMX-address switches: Stand alone function or DMX setting.
ON OFF
1,10 2,3,4,5,6,7,8,9
2,10 1,3,4,5,6,7,8,9
1,2,10 3,4,5,6,7,8,9
3,10 1,2,4,5,6,7,8,9
........
........................
Choose 1st channel
Choose 2nd channel
Choose 3rd channel
Choose 4th channel
As analogy, choose the address as you want
Function:
*.Setup synchronization state of principal and subordinate machine, method for dialing address:
One set of host machine setup function by method of setting auto state and dialing address.
All other coordinate machines set to DMX state on 1st channel. Each of the light should be
connected in series by connect wires.
G. 4 DMX CHANNELS
Channels FUNCTION:
Channel 1 -------------- Dimmer/Strobe
Channel 2 -------------- Red
Channel 3 -------------- Green
Channel 4 -------------- Blue
TECHNICAL FEATURES
Voltage AC230V/50Hz Fuse: 0.5A
Power 6W max at full intensity (full RGB)
Beam Angle : 60
Small packing
Packing 1set/carton
Size 19.5x14x14cm
Gross/Net weight 1/0.8Kg
Big packing
Packing 8set/carton
Size 41x30x30cm
Gross/Net weight 9/8Kg
D Working place
Indoor, temperature: -20-- 45 humidity 0 90
E. Setup state of automation, method of dialing address:
Please read the following picture
5
3
678 910
4
1 2
ON
ON OFF
1,2,3 4,5,6,7,8,9,10
4,5,6 1,2,3,7,8,9,10
7,8 1,2,3,4,5,6,9,10
7,9 1,2,3,4,5,6,8,10
1,9
(1,2),3,9
2,3,4,5,6,7,8,10
4,5,6,7,8,10
Slowly change color (It is can control its speed
Function:
Red lasting lighted
Green lasting lighted
Blue lasting lighted
Transform 7 colors automatically
Flash frequently from red, green to blue
with the 1st and 2nd switch..
F, Setup state of DMX, method of dialing address:
Please read the following picture
5
3
678 910
4
1 2
ON
English
A. Embalje
1. Par36 LEDs---------1PC
2. Manual de intrucciones-------1PC
B. Montaje
Colgarel Par 36 y colocarlo en posicion recta
Conecte la senal. Colocar la senal en el conector marcado como INPUT en la parte trasera de
proyector Y el conector marcado como OUTPUT sirve para dar la senal DMX al siguiente
proyector(1=>Ground, 2=>data-, 3=>data+ )
Spanish
(Mirar el dibujo de instalacion)
SIGUIENTE
C Funcionamiento
1.Entrada de corriente: AC 230V / 50Hz
2.Porta fusibles: 5 x 20mm F0.5A
3. Conector entrada: connected with a DMX512 control panel.
4. Conector salida: connected with the next light.
5. Switch de direccion Amiento.
D Mantenimiento
Interior Temperatura: -20-- 45 Humedad 0 90
Loading...