Tritech WE-B-01, WE-BC-01 User Manual

1
VAVIE ALKALINE WAT ER DISPENSER
USER MANUAL
Model Name: Water Element
Model Number: WE-B-01
Contents
Water Dispensing Procedure ................................................................................................................... 3
Self-Cleaning .......................................................................................................................................... 3
Benefits of Drinking Alkaline Water ...................................................................................................... 4
Dispenser Cleaning Instructions ............................................................................................................. 4
Approved Safety Standards ..................................................................................................................... 5
Terms and Conditions ............................................................................................................................. 7
2
Product Description
1. The feed water of this unit should be 3 or 5 gallon bottled water (Mineral water type).
*Users may contact us for recommended brand of water to be used for best results.
2. The output is either hot water or feed bottled water or alkaline water (depending upon
the selection of push button).
3. This unit was manufactured by applying international advanced technology, with
features of beautiful shape, attractive appearance and ease to use. It is suitable to use at home, hotel, office space and school place and to meet the different needs of the people.
4. This Ionizer has large electroplates which increases usage life of the ionizer. System
also has self-cleaning function.
5. This unit has adapted modular structure with stable quality, easy maintenance, energy
saving, safe and convenient to use.
6. Additional features include high effluent flow rate, no leakage and longer lifespan.
7. The hot pot and heat pipe of this device are manufactured by using stainless steel
material to make sure it is of high product quality with high efficiency and meet the related National Hygiene Standards.
8. This unit has an automatic heating device to adjust the water temperature
automatically which provides high performance with double a protection mechanism.
9. This unit contains a fresh storage cabinet which is used for storage purposes.
10. There is a separate discharge outlet at the back which should be connected by a pipe
to remove the discharge water (produced while dispensing alkaline water).
External Structure Diagram
Note: The water dispenser does not include any bottled water. Contact the distributors to purchase bottled water.
3
Different pH Levels Explanation
CHOICE OF
WATER
pH LEVELS
USES
Alkaline Water
Produces water of
pH 8.5
Beneficial for health by acting as a powerful
antioxidant, an effective alkalizing agent and a
powerful detoxifier.
Bottled Water
Dispenses water
from 3 or 5 gallon bottled water
For bottled water dispenser usage.
Hot Water
Dispenses hot water
from 3 or 5 gallon
bottled water
Useful for making food and beverages.
*Please note that the pH value of the alkaline water will have a tolerance of +/- 0.5 depending on feed bottled water.
Water Dispensing Procedure
A. HOT WATER:
1. Ensure that the power cord is connected and turned ON.
2. Turn ON the HEATER button switch located on the backside. The POWER
indicator and HOT WATER indicator will be ON in the display.
3. Press the hot water dispense button to drink hot water.
Note: If hot water is always preferred for drinking, have the HEATER button switch ON always to get instant hot water. Once sufficient water is heated, the KEEP WARM indicator will turn ON and HOT WATER indicator turns OFF.
B. BOTTLED WATER:
1. Ensure that the power cord is connected and turned ON.
2. Ensure that the “Alkaline Water” push button is OFF.
3. Push lever to dispense normal water.
C. ALKALINE WATER:
1. Ensure that the power cord is connected and turned ON.
2. Press the “Alkaline Water” button
3. Push lever to dispense alkaline water
Note: There will be discharge when dispensing alkaline water. Make sure the discharge pipeline is connected to outlet else the floor will become wet and slippery.
Self-Cleaning
In addition to these different water selections, there is Self-Cleaning feature available. This cleaning functionality is to avoid cases where the pH levels are not up to par or when changing water levels. The unit will automatically self-initiate cleaning when the alkaline water has been used every 50 times.
4
Benefits of Drinking Alkaline Water
WHAT IS ALKALINE WATER?
Alkaline water is the delicious and healthy water created from progressive water technology. This dispenser, through the process of ionization, can instantaneously produce alkaline water. Drinking alkaline water provides various health benefits thereby “Simplifying Healthy Living”.
POWERFUL ANTIOXIDANT
The centrepiece of ionized alkaline water is its antioxidant properties. These hydroxyl ions seek out and neutralize free radicals, making them wonderful free radical scavengers and enabling a body rich in oxygen and energy.
BALANCE BODY pH AS AN EFFECTIVE ALKALIZING AGENT
Keeping the body alkaline is people’s first line of defence in fighting any disease and alkaline ionized water creates a major impact in balancing the body’s pH. A body that is too acidic provides ideal environment for diseases to manifest and thrive in.
SUPERIOR HYDRATOR AND A POWERFUL DETOXIFIER
One of primary causes of disease is chronic cellular dehydration, which leaves the body’s cells in a perpetual state of weakness and defence. Drinking alkaline water is six times more hydrating than “conventional” drinking water. Effective hydration helps skin look healthier and smoother.
Dispenser Cleaning Instructions
NOTE: For your safety, please confirm that the machine is disconnected with power before performing the below listed progresses.
1. All the new products have been checked before delivery; you can directly plug and
play.
2. Please use the listed commercial disinfectants to perform the cleaning procedure;
Follow the guideline cleaning procedure as shown in the user manual to disinfect and wash the unit; after washing, drain the washed water out; the cleaning frequency is normally 6 months per time.
3. Please request for our service to clean smart water seat and heating tank. It will be
beneficial to prolong the unit lifetime for providing good performance. The user also can apply 5% citric acid solution to clean the unit. Add the prepared solution into the smart water seat and aft e r water fl ows out from the hot water outlet, switch on the power and heat the water solution; then after 30 minutes later, turn off the power and drain the residual water out; then use clean water to flush the machine 2 to 3 times. Please DO NOT disassemble the machine. Draining methods: open the faucet first and take out the rubber plug from the hot tank located at the backside, then water will
5
be drained. (Note: the drainage temperature may be very high, so please be careful to avoid scald.)
4. Non-abrasive neutral household detergent can be applied to clean the body surface,
but make sure that the detergent containing water does not flow into the internal body.
Troubleshooting
Problem
Likely Cause
Actions
No outflow from the faucets
1. Empty water bottle
2. The smart water seat
has been sealed by cap sealing paper
1. Change a new bottle
of water
2. Remove the sealing
paper and plug on the
water bottle
Hot water is not hot enough
1. The usage of hot
water is too high in short term
2. Power cable is
unplugged
1. Wait for a while until
the water is hot
2. Check whether the
heating switch and
power supply are on.
Alkaline water not coming through the faucet
1. Empty water bottle
2. Push button not
selected
1. Change a new bottle
of water
2. Make sure that the
push button for alkaline water is selected for
dispensing.
Loud noise
The machine is not placed steady
Make sure the unit is on a
level floor or counter strong enough to support it when
fully loaded.
Fuselage electric leakage
The ground wire didn’t
connect to the ground properly.
Use the standard triplex
receptacle outlet with leakage protector, and promptly
eliminate leakage fault.
Electrical heating pipe has noise
Scaling maybe formed after long term use
Use 5% citric acid to rinse
and clean the electrical heating pipe. The cleaning method is same as the machine cleaning method, but the cleaning solution should be remained and rinse
the pipe for 30 minutes.
Blue LED Blinks 4 times for every 1 second
Water is too pure to ionize
Need to change the input water type to Mineral water.
Approved Safety Standards
1) IEC 60335-2-15:2002 3) PICC (China)
2) SAFETY Mark (Singapore) 4) CCC (China)
6
Technical Specification
Model Name
Water Element
Model Number
WE-B-01
Rated Voltage
230V
Rated Frequency
50Hz
Heater Power
500W
Hot Water Temperature
85°C - 95°C
Protected Against Electric Shock
Class I Type
Operating Temperature
10°C - 40°C
Operating Humidity
≤90%
Usage Guideline
1. Remove the tamper-evident seal from plastic bottle cap. Load water bottle by lifting
and inserting it onto the probe, ensuring bottle is fully aligned with the dispenser and centered over the probe.
2. Place a cup under the dispenser faucet. Push the left faucet handle until water flows
continuously; next, depress the hot water button to make sure there is a continuous flow of water.
3. Now insert the power cord to the socket and turn ON dispenser. Turn on the hot tank
heater switch and the heating indicator will light up; after the water is heated, the heating indictor will be off, and the heating process will be stopped automatically;
4. Before placing the base plate to its position, please try to drain the remaining water on
the base. If disinfection is required, close the cabinet door and turn ON the sterilization switch. The disinfection indicator will light up and the sterilization starts to work. At this time, the cabinet door should still be closed for 1-3hrs until the sterilization is complete.
5. When the water in the dispenser runs out, turn OFF the heating switch and replace the
empty bottle.
Precautions
1. This product is for indoor use. DO NOT expose the dispenser to sunlight.
2. DO NOT modify the power plug or extend the power cable, thereby preventing fires
caused by overheated wires.
3. If the power cable is damaged, the cable spare will be provided by the manufacturer
or replaced by specified technical service contractor.
4. DO NOT place the dispenser near the liquid splashing place. It should be placed at a
dry and cool environment. DO NOT use it under direct sunlight or in outdoor premises. Keep it away from any flammable substances.
5. DO NOT let children operate this machine especially the hot water faucet to avoid
scald.
6. If the dispenser is shutting down for long term, please switch off the power supply,
unplug the power cord and take off the water tank; open the drainage valve and let the residual water drain out. Please remember to close the drainage valve after finishing the drain process.
7
7. DO NOT try to start / shutdown the unit by plug-in / pull out the power directly.
8. If this machine is initial use or after a long term disabled, please clean the water
storage tank and dispensing pipe before starting to use.
9. When doing the cleaning process or stopping the machine for a long term, please pull
out the power. DO NOT clean the dispenser by immersing it into water; DO NOT use water to leach the dispenser body or use gasoline organic solvent to scrub the machine body. Please use wet cloth to wipe the body surface slightly.
10. DO NOT pull the power cord hard. This unit must be applied three-pin socket with
leakage protector.
11. When not in use, please turn off the power for energy saving and accident prevention.
12. DO NOT make unauthorized alterations to the internal circuit.
13. DO NOT apply voltage greater than 230V AC.
14. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
15. Children should be supervised to ensure that they DO NOT play with the appliance.
16. The dispenser must not be immersed in water.
Maintenance
When cleaning this dispenser, turn off the power first and unplug the power cord. Then use detergent wetted cloth to wipe the unit body. Re-wipe the body out of detergent with clean wet cloth. DO NOT clean the unit by splashing water. For long-term product use, please clean the hot water tank by applying 5% citric acid (Food class) every 6 months.
Online Warranty Registration
1. Register online on the VaVie official website: www.vavie.com.sg
2. Please enter the necessary information on the “Warranty Registration” page.
3. Contact us
• If you have any enquires, suggestions, or feedbacks regarding our products and services, please do contact us by email, call our Service Hotline, or visit our website:
• Email: vavie@tritech.com.sg
• Official website: www.vavie.com.sg
Terms and Conditions
1. One year free maintenance is provided (two times a year) which includes: a. Checking for electrical parts b. Checking for water leakage
2. Please call and make arrangement to service your VaVie Water dispenser at your location*. * Service locations must be within Singapore only.
8
_________________________________________________________________________
Tritech Water Technologies Pte Ltd
2, Kaki Bukit Place, Tritech Building, #06-00 Singapore 416180 Tel: +65 6848 2567 Fax: +65 6848 2568 Email: vavie@tritech.com.sg Web: www.vavie.com.sg
_________________________________________________________________________
Loading...