The TQ9223C 3V RFIC Downconverter is a RF receiver IC front end designed for the
high dynamic range cellular communications standards. The TQ9223C provides a
2.8dB system noise figure for excellent sensitivity, and a good signal range with
-11dB input IP3. Its low current consumption, single +3V operation and small plastic
surface-mount package are ideally suited for cost-competitive, space-limited and
portable applications. The TQ9223C will operate over a RF frequency range of 800
to 1000MHz, and therefore may be used for any of the cellular and cordless
telephony standards.
Electrical Specifications
ParameterMinTypMaxUnits
Frequency8001000MHz
Gain19.0dB
Noise Figure2.6dB
Input 3rd Order Intercept-11.0dBm
DC supply Current15.0mA
Note 1: Test Conditions:, Vdd=3.75V, Ta=25C, RF=881MHz, external input and output match; unless otherwise specified.
2For additional information and latest specifications, see our website: www.triquint.com
TQ9223C
Data Sheet
Electrical Characteristics- Mixer section only
ParameterConditionsMin.Typ/NomMax.Units
Conversion Gain3.5dB
Noise Figure12.0dB
Output 3rd Order Intercept10.0dBm
Mixer RF Return Loss15.0dB
Mixer LO Return Loss10.0dB
LO Input Power-6.0dBm
LO to IF Isolation40.0dB
LO to RF Isolation5.0dB
RF to IF Isolation40.0dB
Supply Current4.0mA
Note 1: Test Conditions:, Vdd=3.75V, Ta=25C, RF=881MHz, LO=966MHz, IF=85MHz, LO input=-6dBm: unless otherwise specified.
Absolute Maximum Ratings
ParameterValueUnits
DC Power Supply8.0V
RF Input Power+10dBm
Operating Temperature-40 to 85C
Storage Temperature-55 to 150C
For additional information and latest specifications, see our website: www.triquint.com 3
TQ9223C
Data Sheet
Typical Performance
Test Conditions (Unless Otherwise Specified: Vdd=3.75V, Ta=25C, filter IL=3.0dB, RF=881MHz, LO=966MHz, IF=85MHz, LO input=-6dBm