TriQuint Semiconductor Inc TQ5131 Datasheet

WIRELESS COMMUNICATIONS DIVISION
TQ5131
CDMA
IF Out
RF
IN
GND
GIC
IF
Out
VDD
LO
IN
IF
Out
Mode Select/
LO Input
IFA Gain
Select
AMP's IF Out
Product Description
The TQ5131 is a 3V, RFA/Mixer IC designed specifically for Cellular band CDMA/AMPS applications. It’s RF performance meets the requirements of products designed to the IS-95 and AMPS standards. The TQ5131 is designed to be used with the TQ3131 (CDMA/AMPS LNA) which provides a complete CDMA receiver for 800MHz dual-mode phones.
DATA SHEET
3V Cellular Band CDMA/AMPS RFA/Mixer IC
Features
The RFA/Mixer incorporates on-chip switches which determine CDMA, AMPS and bypass mode select. When used with the TQ3131 (CDMA/AMPS LNA), four gain steps are available. The RF input port is internally matched to 50 , greatly simplifying the design and keeping the number of external components to a minimum. The TQ5131 achieves good RF performance with low current consumption, supporting long standby times in portable applications. Coupled with the very small SOT23-8 package, the part is ideally suited for Cellular band mobile phones.
Electrical Specifications
Parameter Min Typ Max Units Frequency 881 MHz Gain 15.0 dB Noise Figure 4.5 dB Input 3rd Order Intercept 2.5 dBm DC supply Current 15.0 mA
Note 1: Test Conditions: Vdd=2.8V, RF=881MHz, LO=966MHz, IF=85MHz, Ta=25C, CDMA High Gain
state.
1
Applications
IS-95 CDMA Mobile PhonesAMPS Mobile PhonesDual Mode CDMA Cellular application
For additional information and latest specifications, see our website: www.triquint.com 1
TQ5131
Data Sheet
Electrical Characteristics
Parameter Conditions Min. Typ/Nom Max. Units RF Frequency Cellular band 869 881 894 MHz IF Frequency Range High side LO 85 130 MHz
CDMA Mode-Hi gh Gain
Gain 13.0 15.0 dB Noise Figure 4.5 5.5 dB Input IP3 0 2.5 dBm Supply Current 15.0 18.0 mA
CDMA Mode-Hi gh Gain Low Linearity
Gain 14.0 17.0 dB Noise Figure 4.5 5.5 dB Input IP3 -1.0 dBm Supply Current 15.0 mA
CDMA Mode-Mid Gain
Gain 1.0 3.5 dB Noise Figure 11.0 dB Input IP3 13.5 dBm Supply Current 10.5 mA
CDMA Mode-Low Gain
Gain 5.0 7.0 dB Noise Figure 10.0 dB Input IP3 10.0 dBm Supply Current 10.5 mA
AMPS Mode
Gain 9.5 12.0 dB Noise Figure 5.0 6.0 dB Input IP3 -5.0 -3.0 dBm Supply Current 9.0 12.5 mA Supply Voltage 2.8 V
Note 1: Test Conditions: Vdd=2.8V, RF=881MHz, LO=966MHz, IF=85MHz, TC = 25° C, Min/Max limits are at + 25°C case tem perature, unless otherwise specifi ed.
Absolute Maximum Ratings
Parameter Value Units DC Power Supply 5.0 V Power Dissipation 500 mW Operating Temperature -40 to 85 C Storage Temperature -60 to 150 C Signal level on inputs/outputs +20 dBm Voltage to any non supply pin +0.3 V
2 For additional information and latest specifications, see our website: www.triquint.com
Typical Performance, Note: HG Mode=CDMA High Gain, LG Mode=CDMA Low Gain
Test Conditions, unless otherwise specified: Vdd=2.8V, Ta=25C , RF=881MHz, LO=966MHz , IF=85MHz, LO input=-4dBm
Gain vs. Frequency 18 16 14 12 10
Gain (dB)
8 6 4
HG Mode LG Mode AMPS Mode
2
869 875 882 888 894
Frequency (MHz)
16 15 14 13 12 11
Idd (mA)
10
9 8 7 6
869 875 882 888 894
Idd vs. Frequency
TQ5131 Data Sheet
HG Mode LG Mode AMPS Mode
Frequency (MHz)
Input IP3 vs. Frequency
12 10
8 6
HG Mode LG Mode AMPS Mode
4 2
Input IP3 (dBm)
0
-2
-4 869 875 882 888 894
Frequency (MHz)
Noise Figure vs. Frequency
11 10
9 8 7
HG Mode LG Mode AMPS Mode
6 5
Noise Figure (dB)
4 3 2
869 875 882 888 894
Frequency (MHz)
Gain vs. Temperature
18 16 14 12 10
Gain (dB)
8
HG Mode LG Mode AMPS Mode
6 4
-30 0 25 55 85 Temperature (Celsius)
Input IP3 vs. Temperature
12
9
6
HG Mode LG Mode AMPS Mode
3
Input IP3 (dBm)
0
-3
-6
-30 0 25 55 85 Temperature (Celsius)
For additional information and latest specifications, see our website: www.triquint.com 3
TQ5131
Data Sheet
Noise Figure vs. Temperature
12 10
8 6
Noise Figure (dB)
4 2
HG Mode LG Mode AMPS Mode
0
-30 0 25 55 85 Temperature (Celsius)
Idd vs. Temperature
18 16 14 12 10
Idd (mA)
8 6
HG Mode LG Mode AMPS Mode
4
-30 0 25 55 85 Temperature (Celsius)
Input IP3 vs. LO Power
12 10
8 6 4
HG Mode LG Mode AMPS Mode
2 0
Input IP3 (dBm)
-2
-4
-6
-8 -6 -4 -2 0 LO Power (dBm)
Noise Figure vs. LO Power
11 10
9 8 7 6
HG Mode LG Mode AMPS Mode
5
Noise Figure (dB)
4 3 2
-8 -6 -4 -2 0
LO Power (dBm)
Gain vs. LO Power
18 16 14 12
18 16 14 12
10
10
Gain (dB)
8 6 4
HG Mode LG Mode AMPS Mode
2
-8 -6 -4 -2 0
Gain (dB)
8 6 4
2.6 2.8 3 3.2
LO Power (dBm)
4 For additional information and latest specifications, see our website: www.triquint.com
Gain vs. Vdd
HG Mode LG Mode AMPS Mode
Vdd (volts)
Input IP3 vs. Vdd
12 10
8 6 4 2
Input IP3 (dBm)
0
-2
-4
-6
2.62.833.2 Vdd (volts)
Noise Figure vs. Vdd 11 10
9 8 7 6 5
Noise Figure (dB)
4 3 2
2.62.833.2 Vdd (volts)
HG Mode LG Mode AMPS Mode
HG Mode LG Mode AMPS Mode
TQ5131 Data Sheet
Idd vs. Vdd
18 16 14 12
Idd (mA)
10
8 6 4
2.62.833.2 Vdd (volts)
HG Mode LG Mode AMPS Mode
For additional information and latest specifications, see our website: www.triquint.com 5
Loading...
+ 9 hidden pages