Tripp Lite UPB-20K0-2U1C Owner's Manual

Owner’s Manual

20,100mAh 3-Port

Mobile Power Bank,

USB-IF Certified

Model: UPB-20K0-2U1C

USB Type-C and USB-C are trademarks of USB Implementers Forum

Español 8 • Français 15 • Русский 22

WARRANTY REGISTRATION

Register your product today and be
automatically entered to win an ISOBAR
surge protector in our monthly drawing!

tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

Copyright © 2020 Tripp Lite. All rights reserved.

1

General Safety Instructions

• Make sure the power bank is fully charged prior to use.

• Use a cable suitable for your device when charging from the power bank.

• When charging the power bank, it is recommended you use the included
USB Type-C cable.

• Under condition of low battery, the LEDs will turn off while charging a
device. Recharge the power bank as soon as possible to avoid shortening
the battery life.

• The battery should be charged at least every three months to avoid
shortening the battery life.

• It is recommended to disconnect the charging device upon being fully
charged in order to avoid further battery use.

• When the power bank enters protection mode (LEDs turn off and power
bank will not charge) caused by issues such as a short circuit, use an
external charger to charge the power bank so it can resume normal
operation.

• Keep the power bank away from fire and avoid temperatures above 113°F
(45°C) when in use and 140°F (60°C) when not in use.

• Do not expose the power bank to moisture or immerse it in water.

• Do not use a corrosive cleaner on the power bank.

• Do not squeeze or puncture the power bank. Doing so may may allow
electrolyte leakage of the lithium-ion battery.

• Do not attempt to disassemble, modify or fix the power bank.

• Do not use a damaged cable or power charger to charge the power bank.

• Please recycle this device at an appointed disposal location for Lithium
Ion batteries.

2

Product Features

• Simultaneously charge up to 3 phones, tablets or other mobile devices
on-the-go, without the need for a power outlet

• USB-A and USB-C ports provide 57W maximum simultaneous charging
power

• Dual USB-A ports provide 5V 2.4A (12W) of total power per port*

• USB-A ports are BC 1.2 compliant, providing up to 1.5A of fast charging
power to Apple-compliant devices

• USB-C port supports PD Charging up to 5V 3A (15W), 9V 3A (27W),
12V 3A (36W), 15V 3A (45W) and 20V 2.25A (45W)

• 20,100mAh capacity lets you charge at maximum power draw for hours

• Includes short circuit, over-voltage, over-current, over-charge and over­discharge protection for safe and reliable charging

• USB-IF certified

• Four battery power LED indicators show remaining battery capacity

• Automatic power off turns off LED indicators when not in use

• Sleek, portable design is perfect for on-the-go use

*When used simultaneously, the total power per port will be negotiated by device.

Package Includes

• UPB-20K0-2U1C

• USB-C to USB-C Cable (M/M), 3 ft. (0.9 m)

• Owner’s Manual

System Requirements

• Smartphone, tablet or other mobile USB device

3

Optional Accessories

• M100-Series USB to Lightning Cables

• U030-Series USB 2.0 A to 5-Pin Mini-B Cables

• U038-Series USB 2.0 A to USB Type-C Cables

• U326-Series USB 3.0 A to Micro-B Cables

• U420-Series USB 3.1 Type-C M/M Cables

• U422-Series USB 3.1 Type-C to USB 3.0 Type-B Cables

• U426-Series USB 3.1 Type-C to USB 3.0 Micro-B Cables

• U428-Series USB 3.1 Type-C to USB Type-C Cables

• U280-W01-QC3-1 1-Port USB Wall Charger

Power Bank Charging Instructions

Notes:

• A power button is located on the side of the power bank. When pressed once,
the LEDs will illuminate to indicate the power bank’s remaining battery capacity.
When all devices are disconnected, the power bank will stop any device charging
taking place.

• When charging the power bank, the LEDs will illuminate to indicate the battery
capacity level (see table below):

LED Status Power Bank Battery Capacity

●●●●

●●●◎

●●◎○

●◎○○
◎○○○

● = LED Illuminated

○ = LED Off
◎ = LED Flashing

100%
75% - 99%
50% -74%
25%-49%
1% - 24%

1. Using the included USB Type-C cable, connect the In/Output USB Type-C

port on the power bank to the appropriate USB port on your computer or
USB Charger.

2. The power bank will begin charging, with the LEDs operating per the

above notes and table.

4

USB Device Charging Instructions

Notes:

• Before charging your devices for the first time, first fully charge the power bank.

• A power button is located on the side of the power bank. When pressed once,
the LEDs will illuminate to indicate the power banks’s remaining battery capacity.
When all devices are disconnected, the power bank will stop any device charging
taking place.

• When a device is connected to the USB-C port, but appears as if the charge is
being used for the power bank itself, hold the power button down for 3 seconds
to switch the charge from the power bank to the device.

• When charging a USB device, the LEDs will illuminate to indicate the battery
capacity level (see table below):

LED Status Power Bank Battery Capacity

●●●●

●●●○

●●○○

●○○○
○○○○

● = LED Illuminated

○ = LED Off

1. Using the included USB Type-C cable or a USB cable suitable for your

device, connect your mobile devices to the USB A and/or USB-C ports
on the power bank.

2. The devices will begin charging, with the LEDs operating per the above

notes and table.

100%-75%
74%-50%
49% - 25%
24% - 1%
0

5

Specifications

USB-C Input/Output 5V 3A (15W), 9V 3A (27W),

12V 3A (36W), 15V 3A (45W),

20V 2.25A (45W)
USB-A Output 5V 2.4A (12W)
Max Output 57W
Ripple And Noise

Operating Temperature Range 32°F to 104°F / 0°C to 40°C
Storage Temperature Range -4°F to 140°F / -20°C to 60°C
Operating Humidity Range 20 to 90% RH, Non-Condensing
Storage Humidity Range 5 to 90% RH, Non-Condensing
Color Black
Dimensions (L x W x H) 6.4 x 3.2 x 1 in. / 162.4 x 80 x 22 mm
Weight 0.8 lb. / 374 g
Overcurrent Protection Yes
Overvoltage Protection Yes
Overcharge Protection Yes
Overdischarge Protection Yes
Short Circuit Protection Yes
Over-Temperature Protection Yes
Efficiency ≥ 85%

≤

200mVp-p @5V
<300mVp-p @9V
<300mVp-p @12V
<400mVp-p @15V
<400mVp-p @20V

Warranty and Product Registration

1-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one
(1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing
or replacing (at its sole option) any such defective products. To obtain service under this warranty, you
must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE
service center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with
transportation charges prepaid and must be accompanied by a brief description of the problem encountered
and proof of date and place of purchase. This warranty does not apply to equipment, which has been
damaged by accident, negligence or misapplication or has been altered or modified in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

6

Warranty and Product Registration

Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s)
or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as
lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of
substitutes, claims by third parties, or otherwise.

Product Registration

Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into
a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

FCC Notice, Class B

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to this equipment not expressly approved by Tripp Lite could void the user’s

authority to operate this equipment.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations,
when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on
the country)

• Send the new equipment back for recycling when this ultimately becomes waste

Use of this equipment in life support applications where failure of this equipment can reasonably be
expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness
is not recommended.

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

7

19-10-259 93-38B5_RevC

Manual del Propietario

Banco de Potencia

Móvil de 3 Puertos de

20,100mAh,

Certificado USB-IF

Modelo: UPB-20K0-2U1C

USB Tipo C y USB C son marcas comerciales registradas del USB Implementers Forum

English 1 • Français 15 • Русский 22

1111 W. 35th Street, Chicago, IL 60609 EE. UU. • tripplite.com/support

Copyright © 2020 Tripp Lite. Todos los derechos reservados.

8

Instrucciones de Seguridad Generales

• Asegúrese de que el banco de potencia esté totalmente cargado antes
del uso.

• Use un cable adecuado para su dispositivo cuando lo cargue desde el
banco de potencia.

• Al cargar el banco de potencia, es recomendable usar el cable USB Tipo
C incluido.

• Si la batería está baja, los LED se apagarán durante la carga de un
dispositivo. Recargue el banco de potencia tan pronto sea posible para
evitar acortar la vida de la batería.

• La batería debe cargarse por lo menos cada tres meses para evitar
acortar su vida.

• Se recomienda desconectar el dispositivo que se está cargando cuando
esté completamente cargado para evitar un uso adicional de la batería.

• Cuando el banco de potencia ingrese en modo de protección (se
apagarán los LED y el banco de potencia no cargará) como resultado
de problemas como un cortocircuito, utilice un cargador externo para
cargarlo y reanudar así la operación normal.

• Mantenga el banco de potencia alejado del fuego y evite temperaturas
superiores a 45°C [113°F] cuando esté en uso y 60°C [60°C] cuando no
esté en uso.

• No exponga el banco de potencia a humedad ni lo sumerja en agua.

• No utilice un limpiador corrosivo en el banco de potencia.

• No apriete ni perfore el banco de potencia. Si lo hace, podría producirse
la fuga de electrolitos de la batería de iones de litio.

• No intente desarmar, modificar o reparar el banco de potencia.

• No utilice un cable o cargador dañado para cargar el banco de potencia.

• Por favor, recicle este dispositivo en un lugar designado para la
disposición de baterías de iones de litio.

9