Tripp lite UPB-10K0-2U User Manual
Owner’s Manual
10,000mAh Dual-Port
Mobile Power Bank
Model: UPB-10K0-2U
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an ISOBAR6ULTRA
surge protector—a $50 value!
www.tripplite.com/warranty
15-06-039-93346A-EN.indd 1 6/16/2015 11:11:26 AM
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2015 Tripp Lite. All rights reserved.
1
Product Features
• Charge your phone, tablet or other mobile device without the need for a
power outlet
• Sleek, low-profile design is perfect for portable use
• Dual USB ports provide up to 5V, 1A and 5V, 2A of power for
simultaneous charging of mobile devices
• 10,000mAh capacity charges devices at maximum power draw for hours
• Four battery-power LED indicators show remaining battery capacity
• Automatic power saving turns off LED indicators when not in use
• Includes a built-in LED flashlight
• Features short circuit, over-voltage, over-current, over-charge and overdischarge protection for safe and reliable charging
Package Includes
• UPB-10K0-2U
• USB Micro-B Cable, 3-ft.
• Owner’s Manual
System Requirements
• A smartphone, tablet or other mobile USB device
Optional Accessories
• U030-Series USB 2.0 A to 5-Pin Mini-B Cables
• U038-Series USB 2.0 A to USB Type-C Cables
• UR05C-Series Micro-B Charge-Only Cables
• M100-Series USB 2.0 A to Lightning™ Cables
15-06-039-93346A-EN.indd 2 6/16/2015 11:11:26 AM
2
USB Device Charging
Note:
• A button is located on the side of the Mobile Power Bank. When the button is
pressed once, the LED indicators will illuminate to show how much battery capacity
is left. When held down, the button turns off the LED indicators and stops any
device charging taking place. When pressed twice, the button turns the built-in LED
flashlight on/off.
• When charging a USB device, the LED indicators on the Mobile Power Bank will
illuminate in one of four combinations to indicate the following battery capacity
levels:
• 75-100% Capacity – 4 LEDs illuminated solid
• 50-75% Capacity – 3 LEDs illuminated solid
• 25-50% Capacity – 2 LEDs illuminated solid
• 5-25% Capacity – 1 LED illuminated solid
• 0-5% Capacity – 0 LEDs illuminated
1. Connect your mobile device to the USB-A port on the Mobile Power
Bank using the included USB Micro-B cable or a USB cable suitable for
your device.
2. The device will begin charging with the LED indicator light(s) illuminating
according to the combinations listed above.
15-06-039-93346A-EN.indd 3 6/16/2015 11:11:26 AM
3
Loading...