Tripp lite UPB-02K6-1U User Manual
Owner’s Manual
2600mAh
Mobile Power Bank
Model: UPB-02K6-1U
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an ISOBAR6ULTRA
surge protector—a $50 value!
www.tripplite.com/warranty
15-10-305-933468-EN.indd 1 10/23/2015 3:20:40 PM
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2015 Tripp Lite. All rights reserved.
1
Product Features
• Charge your phone, tablet or other mobile device without the need for a
power outlet
• Pocket-size design is perfect for portable use
• USB port provides up to 5V, 1A of power for charging your mobile devices
• 2600mAh capacity charges devices at maximum power draw for hours
• Battery-power LED indicator shows when the battery is full or getting low*
• Features short circuit, over-voltage, over-current, over-charge and overdischarge protection for safe and reliable charging
*The Mobile Power Bank contains openings for LEDs on the top left of the housing
and right side of the USB-A port, but only one is currently being used. The unit’s LED
indicator is located on the top right side of the USB-A port.
Package Includes
• UPB-02K6-1U
• USB Micro-B Cable, 3 ft.
• Owner’s Manual
System Requirements
• A smartphone, tablet or other mobile USB device
Optional Accessories
• U030-Series USB 2.0 A to 5-Pin Mini-B Cables
• U038-Series USB 2.0 A to USB Type-C Cables
• UR05C-Series Micro-B Charge-Only Cables
• M100-Series USB 2.0 A to Lightning™ Cables
15-10-305-933468-EN.indd 2 10/23/2015 3:20:41 PM
2
USB Device Charging
Note:
• When the Mobile Power Bank’s battery is less than 5% during a device charge, the
LED indicator light will turn off.
• When the Mobile Power Bank’s battery is between 5% and 100% during a device
charge, the LED indicator light will blink.
1. Connect your mobile device to the USB-A port on the Mobile Power
Bank using the included USB Micro-B cable or a USB cable suitable for
your device.
2. The device will begin charging with the LED indicator light illuminating,
as listed above.
Mobile Power Bank Charging
Note:
• When charging the Mobile Power Bank, the LED indicator light will blink when the
battery is between 0 and 99%.
• When the Mobile Power Bank is charged to 100%, the LED indicator light will
illuminate solid.
1. Using the included USB Micro-B cable, connect the Micro-B port located
on the Mobile Power Bank to the USB-A port on a computer or USB
Charger.
2. The Mobile Power Bank will begin charging with the LED indicator light
illuminating, as listed above.
15-10-305-933468-EN.indd 3 10/23/2015 3:20:42 PM
3
Loading...