Tripp Lite U442-DOCK15-S Owner’s Manual

Owner’s Manual

USB 3.1 USB-C™ Multi-Port Clip Dock with PD Charging, HDMI, Audio & Card Readers

Model: U442-DOCK15-S

Español 8 • Français 15 • Русский 22

WARRANTY REGISTRATION

tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 • tripplite.com/support

Product Features

•On-the-go docking station connects to a USB-C port to give your device HDMI video, audio, data and memory card ports.

•USB-C Power Delivery (PD) 3.0 port provides up to 60W of power to your USB-C enabled device.

•Sends crystal-clear 4K x 2K @ 30 Hz video signals to a 4K-enabled HDMI TV or projector.

•USB 2.0 Type-A port supports data transfer speeds up to 480 Mbps and is backward compatible with USB 1.1.

•SD and Micro SD memory card slots can be used simultaneously and support 5 Gbps transfer speeds.

•Listen to music or record a podcast using the available 3.5 mm audio port.

•HDMI 1.4 and HDCP 1.4 compliant.

•Plug-and-play design, no external power or drivers needed.

Package Contents

•U442-DOCK15-S

•Owner’s Manual

Optional Accessories:

•P312-Series 3.5 mm Mini Stereo Audio Cables

•P569-Series High Speed HDMI Cables

•U050-XXX-GY-MAX Heavy Duty USB-A to USB Micro-B Cables

Product Overview

5
6	7

1HDMI Port: Supports resolutions up to 4K x 2K (3840 x 2160) @ 30 Hz

2USB-C Port: Supports PD 3.0 Charging up to 60W (20V/3A)

33.5 mm Audio Port: Supports audio output and microphone input

4Micro SD Card Slot

5SD Card Slot

6LED: Illuminates white when power is supplied

7USB 2.0 Type A: Supports data transfer rates up to 480 Mbps

8USB 3.1 Type C (Male)

Installation

1Connect the USB 3.1 Type-C male connector to your USB-C enabled device.

Note: Insert until the clip is fully secured to your device or until a click is heard.

2Using an HDMI cable, such as Tripp Lite’s P569-Series (sold separately), connect the HDMI port to your monitor, TV or projector.

3Connect your USB-C device’s power supply or adapter to the available USB-C PD 3.0 port.

4Connect headphones or a microphone to the 3.5 mm port.

5Insert an SD or Micro SD memory card into the corresponding slot to access external memory.

Note: Both memory card slots can be used simultaneously.

6Transfer data up to 480 Mbps using the USB 2.0 Type-A port.

Specifications:

Input Connector

USB-C	(x1) USB 3.1 Type-C (Male)
Output Connectors
USB-A	(x1) USB 2.0
USB-C	(x1) USB-C PD Charging Only
HDMI	HDMI
Audio	3.5 mm
Memory Cards	(x1) SD, (x1) Micro SD
Environmental
Operating Temperature	32°F to 122°F (0°C to 50°C)
Operating Humidity	10 to 90% RH, Non-Condensing
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Storage Humidity	0 to 95% RH, Non-Condensing
Mechanical
Unit Dimensions	1.3 x 3.9 x 0.5 in.
	(33 x 99 x 12.7 mm)
Unit Weight	0.1 lb. (0.05 kg)
Specifications
HDMI Specification	1.4
HDCP Specification	1.4
Max Supported Video	HDMI: 3840 x 2160 @ 30 Hz
Resolution(s)
Support Color Depth (HDMI)	36 bit (12 bits per channel)
Chroma Subsampling (HDMI)	YCbCr: 4:4:4, 4:2:2, 4:2:0
Audio Specifications	Stereo Audio and Microphone Input
PD Charging Specification	PD 3.0 (60W)

Warranty & Product Registration

3-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of three (3) years from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment which has been damaged by accident, negligence or misapplication or has been altered or modified in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

Product Registration

Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

FCC Notice, Class B

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warranty & Product Registration

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications to this equipment not expressly approved by Tripp Lite could void the user’s authority to operate this equipment.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:

•Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)

•Send the new equipment back for recycling when this ultimately becomes waste

Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended.

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos and illustrations may differ slightly from actual products.

1111 W. 35th Street, Chicago, IL 60609 • tripplite.com/support

7	19-12-261 93-3BB8_RevA

Manual del Propietario

Estación de Conexión con Clip para Puertos Múltiples USB 3.1 USB-C™ con Carga PD, HDMI, Audio y Lectores de Tarjetas

Modelo: U442-DOCK15-S

English 1 • Français 15 • Русский 22

1111 W. 35th Street, Chicago, IL 60609 • tripplite.com/support

Características del Producto

•La estación de conexión sobre la marcha se conecta a un puerto USB-C para proporcionar a su dispositivo puertos para tarjeta de memoria, video, audio y datos.

•El puerto USB-C Power Delivery (PD) 3.0 proporciona hasta 60W de potencia a su dispositivo equipado con USB-C.

•Envía señales de video nítidas de 4K x 2K a 30 Hz a una TV o proyector HDMI equipado con 4K.

•El puerto USB 2.0 Type-A permite altas velocidades de transferencia de datos de hasta 480 Mbps y es compatible con sistemas anteriores USB 1.1.

•Las ranuras para tarjetas de memoria SD y Micro SD pueden usarse simultáneamente y soportan velocidades de transferencia de 5 Gbps.

•Escuche música o grabe un podcast usando el puerto de audio de 3.5 mm disponible.

•Compatible con HDMI 1.4 y HDCP 1.4.

•Diseño para Conectar y Usar sin necesidad de controladores o fuente de alimentación externa.

Contenido del Empaque

•U442-DOCK15-S

•Manual del Propietario

Accesorios Opcionales:

•Cables de Audio Mini Estéreo de 3.5 mm Serie P312

•Cables HDMI de Alta Velocidad de la Serie P569

•Cables USB-A a USB Micro-B para Servicio Pesado U050-XXX-GY-MAX

+ 19 hidden pages