Tripp lite U339-001-FLAT User Manual

Quick Start Guide

USB 3.0 to SATA Hard Drive

Lay-Flat Quick Dock

Model: U339-001-FLAT

Package Contents

• U339-001-FLAT

• USB 3.0 A/B Cable – 4 ft.

• External Power Supply (Input: 100-240V, 50/60Hz, 0.8A Output: 12V, 2A)

• Quick Start Guide

Optional Accessories

• U322-Series USB 3.0 A/B Cables

• U324-Series USB 3.0 A/A Extension Cables

• U360-004-R USB 3.0 Hub – 4-Port

• U360-007 USB 3.0 Hub – 7-Port

Product Features

• Connect a 2.5” or 3.5” SATA hard drive to your computer’s USB port

• Lay-ﬂat design makes for a stable, easy to use solution

• Protective cover slides over the unit to shield the hard drive from dust and other contaminants

• USB 3.0 SuperSpeed (5 Gbps) / 2.0 Hi-Speed (480 Mbps) / 1.X Full-Speed (12 Mbps) compliant

• SATA III (6 Gbps) / II (3 Gbps) / I (1.5 Gbps) compliant

• Supports UASP (USB Attached SCSI Protocol) for faster transfer rates than conventional USB 3.0*

• Plug-and-Play; no software or drivers required

*Requires a UASP-enabled host controller. UASP is supported by Windows® 8 and later, and Mac OS® X 10.8 and later.

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $50 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

System Requirements

• Computer with an available USB port (a USB 3.0 port is required to achieve USB 3.0 data transfer rates)

• 2.5” or 3.5” SATA HDD or SSD

• UASP-enabled host controller (for UASP data transfer rates)

Installation

Note:

• Hard drives are sensitive to static electricity and must be handled properly to prevent data loss. Always handle your hard drive with caution: wear an anti-static strap (Tripp Lite model: P999-000) when transporting it, or touch a grounded metal surface to discharge yourself of static electricity prior to handling the drive.

• If your drive has not been formatted, it will need to be formatted using your computer’s Disk Management utility in order to copy and access ﬁles.

• Prior to unplugging the adapter, make sure to properly eject the drive from your computer to avoid any potential data loss.

1. Connect the U339-001-FLAT to your computer using the included USB 3.0 cable. The green LED on the unit will illuminate to indicate a link

with the USB port on the computer.

2. Connect the external power supply to the U339-001-FLAT and plug it into an appropriate power source. Turn on the power to the

U339-001-FLAT. The blue LED will illuminate to indicate that the unit is receiving power.

3. If the protective cover is still on, remove it by sliding it off of the unit. Connect your 2.5” or 3.5” SATA drive to the port on the unit. Upon

connection, the SATA drive will be recognized by your computer.

4. Slide the protective cover back over the unit to shield your drive from dust and other contaminants.

Warranty and Product Registration

1-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment, which has been damaged by accident, negligence or misapplication or has been altered or modiﬁed in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Speciﬁcally, TRIPP LITE is not liable for any costs, such as lost proﬁts or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to signiﬁcantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a ﬂammable anesthetic mixture with air, oxygen or nitrous oxide.

PRODUCT REGISTRATION

Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

FCC Notice, Class B

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modiﬁcations to this equipment not expressly approved by Tripp Lite could void the user’s authority to operate this equipment.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)

• Send the new equipment back for recycling when this ultimately becomes waste

Tripp Lite has a policy of continuous improvement. Speciﬁcations are subject to change without notice.

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

15-04-131 93-3446_RevA