Tripp Lite U203-004-R User Manual

Tripp Lite World Headquarters
1111 W. 35th Street, Chicago, IL 60609 USA
[phone], www.tripplite.com

User’s Manual

USB Bus-Powered Hub (4 port)

Model #: U203-004-R

NOTE: Follow these installation and operating procedures to ensure correct
performance and to prevent damage to this unit or to its connected devices.

Copyright © 2001 Tripp Lite. All rights reserved. All trademarks are the property of their
respective owners. Technical specifications are subject to change without notice.

System Requirements

l

Windows® 98, Windows® 2000

l

Mac OS 8.6 & up

l

OS/2 Warp (with USB driver installed)

l

Your PC must have USB Host controllers inside the H/W
system

Features

l

Provides four downstream ports.

l

No power adapter required (powered by PC).

l

Per-port overcurrent detection and protection.

l

Per-port power ready/overcurrent LED indicators.

l

A real Plug & Play and Hot-plugged device.

LED Definition

Port 1 - 4 LEDs (Green) - A lit LED indicates that the port is
ready for use or in operation. If an overcurrent condition occurs,
the port will immediately shut down and the LED will turn off.
The port will reset when the hub is disconnected and reconnected.

2