Tripp Lite TE600 User Manual

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +[phone]

E-mail: [e-mail]

Model #: TE600

TE600 - Voltage regulation for poor power environments

Highlights

6 outlets (3 UPS/surge, 3 surge-only)

Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages

Larger scale battery produces significantly longer runtimes

Serial port works with software to facilitate unattended shutdown

$200,000 Ultimate Lifetime Insurance (USA, Puerto Rico & Canada only)

Description

Tripp Lite's TE600 UPS System provides line-interactive voltage regulation and long lasting battery support for small business telephone systems,

voicemail systems, personal computers and other communications, network and telecom applications. 600VA power handling capacity and large

capacity battery system maintains continuous operation through power interruptions with over 1 hour runtime for many phone systems. Line

interactive voltage regulation maintains normal 120 volt output levels during brownouts as low as 75 and overvoltages as high as 147, saving battery

reserves for use only during complete power failures. Unique design features 6 protected outlets (3 UPS supported & 3 surge-suppression only),

diagnostic LEDs and a built-in serial port that works with PowerAlert Software and cabling to provide automatic unattended shutdown of network and

PC applications (part# 75-0195). $200,000 Ultimate Lifetime Insurance (USA & Canada Only).

Applications

Small business telephone systems, voicemail systems, hubs, routers, bridges, concentrators, IP telephony, desktop PCs, small network
fileservers and more.

Package Includes

TE600 UPS System
Warranty information
Instruction manual

Features

Provides connected equipment with continuous power during short and long duration loss of commercial power
Line-interactive voltage regulation corrects brownouts and overvoltages from 75 to 147 volts back to usable 120V output levels, without
using battery power
Supports loads up to 600VA/425 watts
22 minutes half load runtime (300VA/210 watts), 7 minutes full load runtime (600VA/425 watts)
6 protected outlets total (3 UPS Supported & 3 surge-suppression only); 6-ft. cord
DB9 serial network interface
Complete surge protection and EMI/RFI noise filtering
$200,000 Ultimate Lifetime Insurance (USA & Canada Only) — 2 year product warranty — No warranty cards required for coverage!
4 diagnostic LEDs indicate AC present, on battery, voltage correction & battery low/replace
Battery replacement door

Specifications

SYSTEM OVERVIEW

Voltage compatibility 120V AC

Frequency
compatibility

60Hz

OUTPUT

Output VA 600

Output watts 425

Output nominal
voltage

120V AC

Output voltage
regulation

LINE MODE: Sine wave line voltage 120V (-18% / +8%)
BATTERY MODE: PWM sine wave output 120V +/-5%

Output frequency
regulation

LINE MODE: Passes line frequency of 60Hz +/-10%
BATTERY MODE: Inverter output regulated to 60Hz +/-0.5Hz

Outlet quantity / type 6 NEMA 5-15R

INPUT

Maximum input amps 12A / 1440 watts

Input connection type NEMA 5-15P, right-angle plug

Input cord length 6 ft., 14 gauge

Recommended
Electrical Service

15A 120V

BATTERY

Full load runtime 9 minutes (600VA)

Half load runtime 22 minutes (300VA)

DC system voltage 12 VDC

Typical battery
lifespan

3-6 years, depending on usage

Battery recharge rate 2-4 hours to 90%

Replacement Battery
Cartridge

RBC52 (quantity 2)

VOLTAGE REGULATION

Voltage regulation
description

Automatic Voltage Regulation (AVR) circuits maintain clean, regulated computer-grade 120V nominal output, without
using battery power, during brownouts to 75V and overvoltages to 147V

Overvoltage
correction

Input voltages between 128 and 147V AC are reduced by 12%

Direct pass through Input voltages between 108 and 127V AC are passed on to connected equipment unchanged

Brownout correction Input voltages between 93 and 107V AC are boosted by 14%

Severe brownout
correction

Input voltages between 75 and 92V AC are boosted by 30%

LEDS ALARMS & SWITCHES

Front panel LEDs 4 front panel LEDs indicate line power status, battery power status, battery low/replace status and voltage regulation

operation

Alarms Audible alarm with 15 second delay sounds to indicate loss of utility power. Alarm can be silenced by pressing front

panel alarm cancel button. Once silenced, alarm will re-sound when approximately 2 minutes runtime remain.

Switches Includes 2 front panel switches — one main on/off power switch and one dual function "alarm cancel" / "self test" button

SURGE / NOISE SUPPRESSION

AC surge suppression 480 joules