Tripp Lite TE1200 User Manual

Download

Page 1

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +(773) 869 1234

E-mail: saleshelp@tripplite.com

Model #: TE1200

TE Series 1200VA Tower Line-Interactive 120V UPS with serial port

Highlights

6 outlets

Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages

Larger scale battery produces significantly longer runtimes

Serial port works with software to facilitate unattended shutdown

$200,000 Ultimate Lifetime Insurance (USA, Puerto Rico & Canada only)

Description

Tripp Lite's TE1200 UPS System provides line-interactive voltage regulation and long lasting battery support for mid-size business telephone

systems, voicemail systems, personal computers and other communications, network and telecom applications. 1200VA power handling capacity

and large capacity battery system maintains continuous operation through power interruptions with over 2 hours runtime for many phone systems

and over 1 hour for larger systems. Line interactive voltage regulation maintains normal 120 volt output levels during brownouts as low as 75V and

overvoltages as high as 147V, saving battery reserves for use only during complete power failures. Includes 6 outlets, diagnostic LEDs and a built-in

serial port that works with Free PowerAlert Software and cabling to provide automatic unattended shutdown of network and PC applications.

$200,000 Ultimate Lifetime Insurance (USA & Canada Only).

Package Includes

TE1200 UPS System Warranty information Instruction manual

Features

Provides connected equipment with continuous power during short and long duration loss of commercial power Line-interactive voltage regulation corrects brownouts and overvoltages from 75 to 147 volts back to usable 120V output levels, without using battery power Supports loads up to 1200VA/940 watts 16 minutes half load runtime (600VA/470 watts), 7 minutes full load runtime (1200VA/940 watts) 6 protected outlets; 6-ft. cord DB9 network interface Complete surge protection and EMI/RFI noise filtering $200,000 Ultimate Lifetime Insurance (USA & Canada Only 5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace Battery replacement door

Specifications

OUTPUT

Page 2

Output Volt Amp Capacity (VA)

1200

Output kVA capacity (kVA) 1.2

Output Watt Capacity (watts)

940

Nominal Output Voltage(s) Supported

115V; 120V

Frequency compatibility 60 Hz

Output voltage regulation (line mode)

-18%, +8%

Output voltage regulation (Battery mode)

115V (+/- 5%)

Built-in UPS output receptacles

6 5-15R outlet(s)

Output AC waveform (AC mode)

Sine wave

Output AC waveform (battery mode)

PWM sine wave

INPUT

Rated input current (at maximum load)

8.25A

Nominal Input Voltage(s) Supported

120V AC

UPS input connection type 5-15P

UPS Input cord length (ft.) 6

UPS Input cord length (m) 1.8

Recommended Electrical Service

15A 120V

BATTERY

Full load runtime (minutes) 7 min. (940w)

Half load runtime (minutes) 16 min. (470w)

DC system voltage (VDC) 36

Battery recharge rate (included batteries)

Less than 8 hours from 10% to 90%

Replacement battery cartridge (internal UPS battery replacement)

RBC53

Battery Access Battery access door

VOLTAGE REGULATION

Voltage regulation description

Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 75 to 147

Overvoltage correction Input voltages between 128 and 147 are reduced by 12%

Undervoltage correction Input voltages between 93 and 107 are boosted by 14%

Page 3

Severe undervoltage correction

Input voltages between 75 and 92 are boosted by 30%

LEDS ALARMS & SWITCHES

LED Indicators 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status

Alarms Audible alarm indicates power-failure and low-battery conditions

Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate

low-battery status

Switches 2 Switches control off/on power status and alarm-cancel/self-test operation

SURGE / NOISE SUPPRESSION

UPS AC suppression joule rating

480

UPS AC suppression response time

Instantaneous

EMI / RFI AC noise suppression

Yes

PHYSICAL

Installation form factors supported with included accessories

Tower

Installation form factors supported with optional accessories

Wallmount (UPSWM - tower mounting kit)

Primary form factor Tower

UPS / Power Module dimensions in primary form factor (height x width x depth / inches)

12.8 x 7.5 x 9.2

UPS / Power Module dimensions in primary form factor (height x width x depth / cm)

32.4 x 19 x 23.5

UPS / Power Module weight (lbs)

UPS / Power Module weight (kg)

17.3

UPS Shipping dimensions (height x width x depth / inches)

18.2 x 12 x 13.8

UPS Shipping dimensions (height x width x depth / cm)

46.4 x 30.5 x 34.9

Shipping weight (lbs) 42

Shipping weight (kg) 19.1

UPS housing material PVC

ENVIRONMENTAL

Operating Temperature Range

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Page 4

Relative Humidity 0 to 95%, non-condensing

AC mode BTU / hr. (full load)

204

Battery mode BTU / hr. (full load)

277.9

COMMUNICATIONS

Communications interface DB9 Serial; Contact closure

PowerAlert software Free download from www.tripplite.com

Communications cable DB9 cable included

LINE / BATTERY TRANSFER

Transfer time 2-4 milliseconds

Low voltage transfer to battery power (setpoint)

High voltage transfer to battery power (setpoint)

147

SPECIAL FEATURES

Cold Start (startup in battery mode during a power failure)

Cold-start operation supported

CERTIFICATIONS

UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B

(EMI)

WARRANTY

Product Warranty Period (Worldwide)

2-year limited warranty

Connected Equipment Insurance (U.S., Canada & Puerto Rico)

$200,000 Ultimate Lifetime Insurance