Tripp Lite SRW12USNEMA Specsheet

SmartRack 12U NEMA 12 Switch-Depth Wall­Mount Rack Enclosure Cabinet for Harsh
Environments, Hinged Back

MODEL NUMBER: SRW12USNEMA

Wall-mount cabinet secures and organizes 12U of 19-inch rack equipment up to 20.5 inches deep in
harsh, dirty work environments with limited floor space, such as factories, construction areas, utility plants
and warehouses.

Description

The SRW12USNEMA SmartRack 12U NEMA 12 Switch-Depth Wall-Mount Rack Enclosure Cabinet is
designed to house EIA-standard 19-inch rack equipment in harsh, dirty work environments with limited
floor space, such as factories, construction areas, utility plants, power stations, transportation terminals,
distribution hubs and warehouses. Constructed from heavy-duty steel with a durable black powder-coated
finish, the cabinet has a maximum load capacity of 200 pounds.

Highlights

●

Maximum load capacity of 200
lb.

●

NEMA 12 (IP54) rating against
dirt, dust, drips and splashes

●

Swings away from wall on hinge
for easy back-door access

●

Locking steel cabinet with built­in ventilation fans

●

Secures 12U of 19 in. rack
equipment up to 20.5 in. deep

Package Includes

●

SRW12USNEMA SmartRack
12U NEMA 12 Switch-Depth
Wall-Mount Rack Enclosure
Cabinet

●

(20) M6 screws

●

(20) M6 cage nuts

●

(20) M6 washers

●

Dust filter

●

AC power cord, 6 ft.

●

(2) Keys

●

Owner’s manual

The SRW12USNEMA has a NEMA 12 (IP54) protection rating, protecting sensitive equipment against dirt,
dust, lint, oil, drips and splashes. Its built-in air filter, louvered vents on the front door and side panels,
sealed gasket around the door frames and brush strips around cable access points prevent dripping
water, oil and airborne contaminants from getting inside. You can replace the air filter with standard, off­the-shelf furnace filters. Four high-performance intake fans built into the front door pull filtered air through
the cabinet to keep your equipment cool.

The cabinet swings away from the wall on a sturdy hinge, allowing easy back-door access to equipment
and cabling during installation and maintenance. The reversible doors can open left or right. The doors
and side panels lock securely to help prevent damage, tampering or theft. Convenient ports on the back
door allow easy cable routing.

The SRW12USNEMA comes fully assembled and ready to mount to the wall. Square and 12-24 threaded
mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails
adjust in 7/8-inch increments to house equipment up to 20.5 inches deep, such as network switches and

1 / 4

patch panels.

Features

Saves Valuable Workspace

●

Perfect for factories, construction areas, utility plants, power stations, transportation terminals,
distribution hubs, warehouses and other harsh, dirty work environments where you need equipment to
be secure, organized, out of the way and protected from environmental contaminants

●

Houses EIA-standard 19 in. rack equipment in 12U of space

●

Maximum load capacity of 200 lb.

NEMA 12 (IP54) Protection Rating

●

Built-in air filter, louvered vents and sealing door gaskets keep out dirt, dust, lint, oil, drips and splashes

●

Removable air filter can be replaced with standard, off-the-shelf furnace filters

●

Built-in high-performance door fans plug into standard NEMA 5-15R outlet (6 ft. power cord included)

●

Sealed cable ports maintain dust and moisture resistance

Hinged Cabinet for Convenient Access

●

Swings away from the wall to allow easy back-door access to equipment and cabling during installation
and maintenance

●

Reversible doors can open left or right to accommodate various rack configurations

Keeps Important Equipment Secure

●

Side panels and doors lock securely to help prevent damage, tampering or theft

●

Vented panels and built-in fans provide generous airflow to keep equipment cool

●

Convenient ports with removable covers and protective brush strips allow cable routing through rear
door

Easy Enclosure and Equipment Installation

●

Ships fully assembled for quick installation

●

Ready to mount to the wall

●

Wall-mounting holes spaced 16 in. apart for standard wall stud placement

●

Vertical mounting rails adjust in 7/8 in. increments to accommodate equipment up to 20.5 in. deep, such
as network switches and patch panels

●

Rails support square-hole or 12-24 threaded-hole mounting

●

Rack spaces numbered for easy reference

Meets Payment Card Industry Standards

●

Provides physical equipment and media security required for PCI DSS (Payment Card Industry Data
Security Standard) compliance

Specifications

2 / 4