Tripp Lite SMART5000XFMRXL User Manual

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +[phone]

E-mail: [e-mail]

Model #: SMART5000XFMRXL

SmartPro 3U Rack/Tower Extended Run UPS - Line interactive, sine wave UPS with integrated switched PDU
and current monitoring

Highlights

5000VA 208/120V Sine Wave Expandable Rack/Tower UPS - All-in-one

chassis requires 3 rack spaces total

Battery Independent AVR corrects brownouts to 167V and overvoltages to

260V

Multiple interfaces - USB, DB9 serial, SNMPWEBCARD Slot

Integrated Switched PDU with Current Monitoring and 8 single-outlet load

banks

11 Outlets (2 L6-20, 1 L6-30, 8 NEMA 5-15/20R)

$250,000 Ultimate Lifetime Insurance (USA, Puerto Rico & Canada only)

Description

Tripp Lite 5kVA Smart RM UPS. 5000VA line-interactive UPS for server, network and telecommunications equipment. UPS with internal batteries

requires 3 rack spaces installed. Accepts 208V nominal input voltage. Simultaneous 208 & 120V output. Corrects brownouts and overvoltages from

167V to 260V. Sine wave output. Maintains battery-derived AC output during blackouts and severe voltage fluctuations. Expandable runtime with

optional external battery packs. 11 output receptacles. NEMA L6-30P input connection with support for user-supplied 50A or hardwire input.

Network-grade AC surge and noise suppression. Network management interfaces include USB, DB9 serial and SNMPWEBCARD slot. Supports

simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all network interfaces simultaneously.

Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Integrated 8-bank switched PDU. 3-stage

metered current monitoring and battery charge LEDs. Utility power and voltage regulation LEDs. Audible alarm. Self-test. 4-post rack mounting

accessories included; 2-9USTAND and 2POSTRMKITWM accessories available. Field-replaceable, hot-swappable internal batteries and battery

packs. Attractive all-black color scheme. 2-year warranty and $250,000 connected equipment insurance; extended warranty and service contracts

available.

Applications

Ideal for protection of sensitive electronics in any application calling for upright tower or 19-in. rackmount UPS protection. Common
applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems

Package Includes

SMART 5000XFMRXL UPS System
PowerAlert Software and Cabling
Mounting hardware for 4-post rackmount installation
Warranty information
Instruction manual

Features

5000VA/3750 watt max. output power capacity compatible with North American 208V/60Hz input voltage
Supports full output at either 208V or 120V
3U rack/tower UPS installs in standard 19 inch rack enclosures with an installed depth of only 22.5 inches

Protects sensitive networking equipment from blackouts, voltage fluctuations and transient surges
Line Interactive Automatic Voltage Regulation (AVR) corrects 208V nominal input from 167 to 260VAC back to usable 208/120V levels
without consuming battery power
AVR circuits boost undervoltages by 12% and reduce overvoltages by 12%
Network interfaces support simultaneous communications via USB, DB9 serial and SNMPWEBCARD slot
Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus
any number of additional servers over IP
Communications ports support on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge
current, battery capacity, internal UPS temperature, AC line frequency, timed inverter shutoff, activate self-test and load bank output power
control
Built-in Emergency Power Off (EPO) interface with cable
Sine wave output in AC and battery mode
Expandable runtime with optional BP48V60RT3U external battery packs
Half/full load runtime of 27/10 minutes with internal batteries
Includes 11 output receptacles (2 L6-20, 1 L6-30 & 8 NEMA 5-15/20R)
Ships with installed L6-30P input plug, supports user supplied 50A replacement plug or hardwire input
Integrated 8 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual devices
3 stage metered LEDs offer current monitoring and battery charge level
Mains power and voltage regulation LEDs offer at-a-glance power status information
Front panel switches support self-test and alarm cancel functions
Included adjustable mounting rails support installation in 4 post 19 inch racks
UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user is required
Supports 2 post rackmount installation with optional 2POSTRMKIT accessory
Supports upright tower placement with optional 2-9USTAND accessory
UL (USA), cUL (Canada), NOM (Mexico), TUV, FCC Class A (Emissions) listed
2 year manufacturer's product warranty, $250,000 Ultimate Lifetime Insurance

Specifications

SYSTEM OVERVIEW

Voltage compatibility 208V

Frequency
compatibility

60Hz

OUTPUT

Output VA 5000

Output watts 3750

Output nominal
voltage

208V & 120V

Output voltage
regulation

LINE MODE: Sine wave line voltage 208V & 120V (+/-10%) BATTERY MODE: 208V & 120V (+/-5%)

Output frequency
regulation

LINE MODE: Passes line frequency of 60Hz +/-10%, BATTERY MODE: Inverter output regulated to 60Hz (+/-0.5Hz)

Outlet quantity / type 1 NEMA L6-30R, 2 NEMA L6-20R and 8 NEMA 5-15/20R

Customized load
management
receptacles

Includes 8 single-outlet NEMA 5-15/20R load banks that support on-demand load shedding and remote reboot of locked
network devices. Controllable via PowerAlert software to switch off optional loads, e.g. monitors, to increase available
runtime for servers and other critical devices

Overload protection Resettable circuit breakers

INPUT

Maximum input
amps

27A

Input connection
type

NEMA L6-30P

Input cord length 10 ft./3m

Recommended
Electrical Service

208V 30A or optional 208V 50A input supported