Tripp Lite SMART3000CRMXL User Manual

Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model #: SMART3000CRMXL
Highlights
3000VA / 3kVA line interactive 4U rack / tower UPS with reduced mounting
depth and high power factor 2880w (with plug) or 3600W (hardwire) capacity
Maintains sine-wave 120V nominal output over an input range of 83 to 145V
Network communications supported via USB port, serial port, SNMP/Web card
slot and EPO interface
Expandable runtime with optional external battery packs
Input: NEMA L5-30P or hardwire (120V 30A) / Output: 8 NEMA 5-15/20R, 1
L5-30R (120V)
2 year product warranty / $250,000 Ultimate Lifetime Insurance (USA, Puerto
Rico & Canada only)
Description
Tripp Lites SmartPro Compact Rackmount Uninterruptible Power Supply (UPS) offers line interactive voltage regulation, network grade surge
suppression and long lasting battery support for critical network hardware during blackouts and extended power failures. Special reduced-depth
housing, larger internal batteries, higher rated wattage and included 2 post rackmount installation hardware makes these systems ideal for network
and telecom wiring closets and other limited-space installations. Runtime is expandable with optional BP48V48RT4U and BP48V24-2U
reduced-depth external battery packs.
SMART3000CRMXL 4U rackmount 3000VA UPS offers battery-derived sine wave AC output during power failures and extreme voltage variations.
Supports 3000VA/2880 watts when powered via included L5-30P input plug. Supports up to 3600VA/3600 watts when hardwired to a 120V 30A
input source. Line interactive Automatic Voltage Regulation (AVR) provides two levels of voltage boost during brownouts and one level of voltage cut
during overvoltage conditions to maintain regulated 120V nominal output over an input range of 83-145V. Includes NEMA L5-30P input plug (or
hardwire input), L5-30R and 5-15/20R output receptacles. Optional SNMPWEBCARD offers remote management and control of the UPS via direct
network connection. Additional ENVIROSENSE accessory, when used in conjunction with SNMPWEBCARD reports temperature, humidity and
status of up to two directly connected contact closure sensors. HID-compliant USB interface enables full integration with built-in power management
and auto shutdown features of Windows and Mac OS X. Supports detailed monitoring of equipment load levels, self-test data and utility power
conditions via all 3 network interfaces at once. Includes PowerAlert monitoring software with USB and serial cables. Emergency Power Off (EPO)
interface. Integrated 3-bank programmable PDU switching supports load shedding and remote-reboot of up to 3 individual connected devices.
3-stage metered current monitoring and battery charge status LEDs. Utility power and voltage regulation LEDs. Audible alarm. Self-test. 2-post
rackmount accessories included; 2-9USTAND tower stands and UPSRMRII 4 post rackmount kit available. Field-replaceable, hot-swappable internal
batteries and external battery packs. Attractive all-black color scheme. 2-year warranty and $250,000 connected equipment insurance; extended
warranty and service contracts available.
Applications
Special reduced-depth housing, larger internal batteries, higher rated wattage and included 2 post rackmount installation hardware makes these
systems ideal for network and telecom wiring closets and other limited-space installations
Package Includes
SmartPro Compact 4U Rackmount UPS system 2 post rackmount installation brackets USB and Serial Cabling Owner's manual with warranty information
Features
Tripp Lite's SmartPro Compact Rackmount Uninterruptible Power Supply (UPS) offers line interactive voltage regulation, network grade surge suppression and long lasting battery support for critical network hardware during blackouts and extended power failures Special reduced-depth housing, larger internal batteries, higher rated wattage and included 2 post rackmount installation hardware makes these systems ideal for network and telecom wiring closets and other limited-space installations Runtime is expandable with optional BP48V48RT4U and BP48V24-2U reduced-depth external battery packs SMART3000CRMXL 4U rackmount 3000VA/2880 watt UPS offers battery-derived sine wave AC output during power failures and extreme voltage variations Supports loading up to 3600 watts when hardwired Line interactive Automatic Voltage Regulation (AVR) provides two levels of voltage boost during brownouts and one level of voltage cut during overvoltage conditions to maintain regulated 120V nominal output over an input range of 83-145V Includes NEMA L5-30P input plug (hardwire line cord installation supported), L5-30R and 5-15/20R output receptacles Network management interfaces support simultaneous communications via USB port, DB9 serial port and optional SNMP/Web management accessory card slot Optional SNMPWEBCARD offers remote management and control of the UPS via direct network connection Additional ENVIROSENSE accessory, when used in conjunction with SNMPWEBCARD reports temperature, humidity and status of up to two directly connected contact closure sensors HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows and Mac OS X 97% efficiency in line power mode offers substantially lower operating costs than lower efficiency UPS types Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces at once Includes PowerAlert monitoring software with USB and serial cables Emergency Power Off (EPO) interface Integrated 3-bank programmable PDU switching supports load shedding and remote-reboot of up to 3 individual connected devices 3-stage metered current monitoring and battery charge status LEDs; Utility power and voltage regulation LEDs; Audible alarm; Self-test 2-post rackmount accessories included; 2-9USTAND tower stands and UPSRMRII 4 post rackmount kit available Field-replaceable, hot-swappable internal batteries and external battery packs Attractive all-black color scheme 2-year warranty and $250,000 connected equipment insurance; extended warranty and service contracts available
Specifications
SYSTEM OVERVIEW
Voltage compatibility 120 volts
Frequency compatibility
60Hz
OUTPUT
Output VA 3000
Output watts 2880 watts with L5-30P input line cord / 3600 watts hardwired with no external battery packs connected
Output nominal voltage
120V
Output voltage regulation
Automatic Voltage Regulation (AVR) circuits maintain clean, regulated computer-grade 120V nominal output, without using battery power, during brownouts to 83V and overvoltages to 145V
Output frequency regulation
LINE MODE: Passes line frequency of 60Hz +/-10%
Outlet quantity / type 9 outlets (1 L5-30R / 8 5-15/20R)
Customized load management receptacles
3 individually controllable single outlet 5-15/20R load banks
Overload protection Via 40A input circuit breaker
INPUT
Maximum input amps
24A with L5-30P input / 30A hardwired
Input connection type
L5-30P (back panel terminal block enables hardwire input (see manual)
Input cord length 10 ft.
Recommended Electrical Service
120V 30A
BATTERY
Full load runtime With L5-30P plug - 7.5 minutes (2880 watts) / With hardwire input - 5 minutes (3600 watts)
Half load runtime With L5-30P plug - 19 minutes (1440 watts) / With hardwire input - 13 minutes (1800 watts)
DC system voltage 48VDC
Replacement Battery Cartridge
RBC54 (qty 2)
VOLTAGE REGULATION
Voltage regulation description
Automatic Voltage Regulation (AVR) circuits maintain clean, regulated computer-grade 120V nominal output, without using battery power, during brownouts to 83V and overvoltages to 145V
Overvoltage correction
Input voltages between 127 and 145V AC are reduced by 12%
Brownout correction Input voltages between 96 and 108V AC are boosted by 12%
Severe brownout correction
120V only: Input voltages between 83 and 95 are boosted by 24%
LEDS ALARMS & SWITCHES
Front panel LEDs 5 front panel LEDs - Green POWER LED, Green VOLTAGE CORRECTION LED, 3 color BATTERY CHARGE LED, 3
color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED.
Alarms 3 function audible alarm indicates power failure conditions (4 short beeps every 10 seconds), overload (continuous short
beeps) and low battery (continuous tone)
Switches Yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions. Back
panel includes battery charge level switch for internal or external battery configurations
SURGE / NOISE SUPPRESSION
AC surge suppression
570 joules
AC suppression response time
Instantaneous
EMI / RFI AC noise suppression
Yes
PHYSICAL
Shipping weight (lbs)
124
Shipping weight (kg) 56.3
Shipping Dimensions (HWD/in)
13.2 x 23.6 x 22.8
Shipping Dimensions (HWD/cm)
33.5 x 59.9 x 57.9
Unit weight (lbs) 102
Unit weight (kg) 46.3
Unit Dimensions (HWD/in)
7 x 17.3 x 16.8
Unit Dimensions (HWD/cm)
17.8 x 43.9 x 42.7
Material of construction
Steel
Form factors supported
Rack (4U)
Cooling method Fan
Battery Access Battery access door allows hot swap battery replacement without powering connected equipment off
ENVIRONMENTAL
Relative Humidity 0-95%, non-condensing
Operating Temperature
32-104 F / 0-40 C
Line mode BTU/hr. (Max.)
539
COMMUNICATIONS
Network monitoring port
Includes USB and DB9 serial ports. Built-in DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact closure monitoring ability. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X.
Software and cabling included
Yes, includes PowerAlert software CD-ROM and complete cabling
SNMP compatibility Yes, includes slot for optional SNMPWEBCARD accessory (#SNMPWEBCARD)
WatchDog compatibility
Yes, compatible with Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot of application / OS or hard power off/on reboot of connected equipment ideal for unattended kiosk applications
LINE / BATTERY TRANSFER
Transfer time from line power to battery mode
5 ms. (typical)
Low voltage transfer to battery power
Switches to battery power as line voltage drops to 83V or less. Switches back to line power mode as line voltage recovers to 87V or higher.
High voltage transfer to battery power
Switches to battery power as line voltage increases to 145V or higher. Switches back to line power mode as line voltage recovers to 141V or lower.
SPECIAL FEATURES
EPO port Includes RJ11 EPO (emergency power off) port and interconnection cable
Cold Start Yes, inverter can be "cold started" to enable temporary AC output during a power failure
Appearance Attractive black rackmount housing, optional use 2U black front bezel included to enable black color appearance
BATTERY PACK ACCESSORY (optional)
Battery Pack Accessory (optional)
Compatible with BP48V24-2U (limit 1), BP48V48RT4U (multi-pack compatible)
CERTIFICATIONS
Certifications Tested to UL1778 (USA), CSA (Canada), NOM (Mexico), Class A (Emissions)
WARRANTY
Product Warranty Period
2 year product warranty
Connected Equipment Coverage
2-year warranty and $250,000 connected equipment insurance
Related Items
External Battery Packs
BP48V24-2U BP48V242U - External Battery Pack for UPS System - LIMIT 1 Qty: [optional]
BP48V48RT4U Shallow-Depth External Battery Pack For UPS Systems Qty: [optional]
Power Distribution
PDU2430 Basic PDU / Power Distribution Unit - Safe, reliable power distribution for critical networking
equipment
Qty: [optional]
PDUMH30NET Switched, Metered PDU with Remote Monitoring - 2U Rackmount Power Distribution Unit for
Networks with Individually Switchable Outlets, Current Metering, Remote Monitoring and Control
Qty: [optional]
PDUMV30 Metered 0U Vertical Rack PDU - Metered Power Distribution Unit for Network Applications Qty: [optional]
PDUMV30NET Switched, Metered PDU with Remote Monitoring - 0U Vertical Rackmount Power Distribution
Unit for Networks with Individually Switchable Outlets, Current Metering, Remote Monitoring and Control
Qty: [optional]
Rackmount/Wallmount Kits
4POSTRAILKIT Supports UPS systems in 4-post rackmount applications. Qty: [optional]
SNMP Accessories
ENVIROSENSE Power Management Tools - Environmental Sensor Qty: [optional]
SNMPWEBCARD Power Management Tools - Internal SNMP/Web Card Qty: [optional]
Start-Up/Warranty Services
WEXT3-2200-3000 3-Year Extended Warranty - 1-year extension of standard 2-year warranty Qty: [optional]
WEXT5-2200-3000 5-Year Extended Warranty - 3-year extension of standard 2-year warranty Qty: [optional]
Tower Stands
2-9USTAND Tower Stand - Expandable Tower Base Stand UPS Accessory Qty: [optional]
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=3824.
©2009 Tripp Lite. All Rights Reserved.
Loading...