Tripp Lite SMART2200RM2UN User Manual

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +[phone]

E-mail: [e-mail]

Model #: SMART2200RM2UN

SmartPro 2.2kVA 1.92kW Line Interactive Sine Wave UPS, Pre-installed SNMPWEBCARD, 2U, LCD, USB,
Serial, EPO, 120V

Highlights

2.2kVA / 2200VA / 1920W line interactive 2U rack/tower UPS; 0.87 power

factor

120V nominal output during brownouts to 83V and overvoltages to 145V

Interactive LCD provides UPS status information and advanced configuration

options

Hot-swap batteries, 96% efficiency, Sine wave output

USB, RS232 & EPO ports, Pre-installed SNMPWEBCARD interface

2 independently switchable output load banks

NEMA 5-20P input; 4 NEMA 5-15R & 4 5-15/20R outlets

Description

Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and
telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects
brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration
excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout
conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and
configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment
without interruption or reboot. 96% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support
communications via USB, RS-232 and Pre-installed SNMPWEBCARD network interface. HID-compliant USB interface enables integration with
built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of
equipment load levels, self-test data and utility power conditions. Includes PowerAlert monitoring software and complete cabling. Switched output
load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display
panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode
configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.

Applications
Ideal for server, networking and telecommunications equipment

Package Includes

SMART2200RM2UN UPS system with Pre-installed SNMPWEBCARD
PowerAlert Software with USB, Serial & EPO cabling
4 post rackmount installation kit
Instruction manual

Features

Tripp Lite SMART2200RM2UN line interactive 2U rack/tower UPS with 2200VA / 2.2kVA / 1920W capacity
Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages from 83 to 145V
NEMA 5-20P input plug; 4 NEMA 5-15R & 4 NEMA 5-15/20R output receptacles, Two independently switchable output load banks
Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages
High 96% efficiency rating in line-power mode offers reduced power consumption and BTU emisssions
Internal batteries offer 12 minutes at 50% load (960W) and 4.5 minutes at 100% load (1920W)
Hot-swappable, user-replaceable internal batteries can be replaced with no disruption to connected equipment
Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7
selectable screens of detailed UPS and site power information
LCD interface also supports a number of advanced user setup and operating preferences
Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation; Optional

2-9USTAND enables tower placement
Built-in USB, RS-232 and Pre-installed SNMPWEBCARD accessory monitoring options
HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
Included PowerAlert UPS monitoring software; Built-in Emergency Power Off (EPO) interface with cable

Specifications

OUTPUT

Output Volt Amp
Capacity (VA)

2200

Output kVA capacity
(kVA)

2.2

Output Watt Capacity
(watts)

1920

Output kW capacity 1.92

Output power factor 0.87

Nominal Output
Voltage(s) Supported

120V

Frequency
compatibility

60 Hz

Output voltage
regulation (line mode)

-14%, +6%

Output voltage
regulation (Battery
mode)

+/- 5%

Built-in UPS output
receptacles

4 5-15R outlet(s); 4 5-15/20R outlet(s)

Built-in controllable
switched load banks

Two switchable single-outlet load banks

Output AC waveform
(AC mode)

Pure Sine wave

Output AC waveform
(battery mode)

Pure Sine wave

INPUT

Rated input current
(at maximum load)

16A (120V)

Nominal Input
Voltage(s) Supported

120V AC

UPS input
connection type

5-20P

Input circuit breaker 20A

UPS Input cord
length (ft.)

10

UPS Input cord
length (m)

3

Recommended
Electrical Service

20A 120V

BATTERY