Tripp-Lite SMART2200NET Specifications

SmartPro 120V 2.2kVA 1.7kW Line-Interactive UPS,

Highlights

2.2kVA / 2200VA line interactive,

extended-run tower UPS

120V output, Corrects brownouts

and overvoltages from 87V to

140V

3 DB9 communication ports (1

RS232 / 2 contact-closure)

Front panel status LEDs with

load and battery capacity display

2 independently switchable

output load banks

NEMA 5-15P input, 6 NEMA

5-15R outlets

Package Includes

SMART 2200NET UPS System

PowerAlert Software and three 6

foot network cables

Instruction manual

Tower, Extended run, 3 DB9 ports

MODEL NUMBER: SMART2200NET

Description

Tripp Lite's SMART 2200NET intelligent, line interactive large tower UPS system protects servers, networking

accessories and telecommunications equipment from blackouts, voltage fluctuations and transient surges. Large

internal batteries offer 27 minutes half load runtime and 11 minutes fully loaded. Runtime is expandable with optional BP24V28-2U(limit 1) and BP24V70-3U

external battery packs. 2200VA/1700 watt power handling capability supports a variety of networking, telecom and other sensitive electronic applications.

Includes 6 protected outlets. Supports remote monitoring of UPS and site power conditions via built-in RS-232 enabled monitoring port, plus standard UPS

monitoring via 2 built in contact closure ports. Includes PowerAlert UPS monitoring and unattended shutdown software with complete cabling. Built-in audible

alarm and front panel LEDs indicate line power, battery power, battery charge level, load level, plus voltage regulation status. Network grade AC surge

suppression protects equipment from damage and performance problems resulting from transient surges.

Features

SMART 2200NET line interactive UPS offers battery derived AC output during power outages, voltage regulation during brownouts and overvoltages, plus

network-grade AC surge suppression

2200VA/1700 watt power handling capability supports a variety of networking, telecom and other sensitive electronic devices

Large internal batteries offer runtimes of 27 minutes at half load(1100VA/850 watts) and 11 minutes at full load(2200VA/1700 watts)

Runtime is further expandable with optional external BP24V28-2U(limit 1) and BP24V70-3U(multi-pack compatible) battery packs

Intelligent battery management system extends battery life

Automatic Voltage Regulation(AVR) circuits maintain 120V nominal output over an input voltage range of 87-140V

Includes 6 fully protected NEMA 5-15R outlets with 2 single outlet load banks that can be individually powered off and back on again via software interface

PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, email notification, event logging and

running user defined script commands

Offers simultaneous monitoring of up to 3 directly connected devices through included DB9 contact closure and RS-232 enabled interfaces, or the

monitoring of any number of additional servers over IP with included PowerAlert monitoring software

In addition to the contact closure monitoring of on battery, low battery and power restored messaging, built-in RS-232 interface supports messaging of

UPS and line power status, including AC line voltage, DC battery voltage and remaining battery capacity

Supports activate self-test and UPS output power control for delayed or immediate reboot of connected equipment

Diagnostic LEDs(indicate 17 performance conditions)

Specifications

OUTPUT

Output Volt Amp Capacity (VA) 2200

Output kVA Capacity (kVA) 2.2

Output Watt Capacity (Watts) 1700

Output kW Capacity (kW) 1.7

Output Capacity Details 1200W max output with 1-2 external battery packs; 800W max output with 3 or more external battery packs

Power Factor 0.8

Nominal Output Voltage(s)
Supported

Nominal Voltage Details 120v nominal output in battery mode

Frequency Compatibility 60 Hz

Output Voltage Regulation (Line
Mode)

Output Voltage Regulation (Battery
Mode)

Output Receptacles (6) 5-15R

Load Management Receptacles Two switchable single outlet 5-15R load banks

Output AC Waveform (AC Mode) Sine wave

Output AC Waveform (Battery Mode) PWM sine wave

INPUT

Rated input current (Maximum Load) 15A

Nominal Input Voltage(s) Supported 120V AC

UPS Input Connection Type 5-15P

Input Circuit Breakers 20A

UPS Input Cord Length (ft.) 8

110V; 115V; 120V

-13% / +5%

+/- 5%

UPS Input Cord Length (m) 2.4

Recommended Electrical Service 20A 120V

Input Cord Length (ft.) 8

Input Cord Length (m) 2.4

Input Phase Single-Phase

BATTERY