Tripp Lite SMART1500RM2U User Manual

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +[phone]

E-mail: [e-mail]

Model #: SMART1500RM2U

SmartPro Rack/Tower UPS - Intelligent, line-interactive network power management system

Highlights

1500VA / 1.5kVA line interactive 2U rack / tower UPS

Maintains sine-wave 120V nominal output over an input range of 83 to 147V

Network communications supported via USB port, serial port, SNMP/Web card

slot and EPO interface

Current monitoring and switched PDU control via 2 two-outlet load banks

Input: NEMA 5-15P (120V 15A) / Output: 8 NEMA 5-15R (120V)

2 year product warranty / $250,000 Ultimate Lifetime Insurance (USA, Puerto

Rico & Canada only)

Description

Tripp Lite's SMART 1500RM2U intelligent, line-interactive sine wave rack/tower uninterruptible power supply prevents data loss, downtime and

equipment damage due to power outages, voltage fluctuations and transient surges. Requires only two rack spaces (2U) in a standard rack

enclosure. Large internal batteries offer 19 minutes half load runtime and 7 minutes at full load. Maintains regulated 120V nominal output without

using battery power during brownouts and overvoltages from 83 to 147V. 1500VA/1000 watt power handling capability and full time sine wave output

supports networking, telecom and other sensitive electronic applications. Includes a total of 8 outlets arranged in 2 load banks that are individually

controllable by a software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical

equipment. Supports simultaneous remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Optional

SNMPWEBCARD accessory enables remote monitoring of UPS as a managed device via network management console applications.

Communications ports support messaging of detailed UPS operational parameters and line power status. Includes PowerAlert UPS monitoring and

unattended shutdown software with management support for an unlimited number of network UPS systems. Built-in accessory slot supports SNMP

with optional SNMPWEBCARD adapter. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS and connected

equipment in the case of fire or emergency. Multi-function audible alarms and set of 5 front panel LEDs offer at-a-glance notification of UPS and line

power status. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges and

line noise. Attractive all-black color scheme. Two year warranty with $250,000 connected equipment insurance (USA & Canada only).

Applications

Ideal for rackmount or upright tower protection of fileservers, network accessories and telecommunications equipment in server rooms,
internetworking closets, co-location racks, kiosks and a variety of other locations. Common applications include any mix of servers,
workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems.

Package Includes

SMART 1500RM2U UPS System
Mounting hardware for 4 post rackmount installation
Cabling for USB & DB9 monitoring and EPO switching
PowerAlert unattended shutdown and UPS/Power monitoring software
Warranty information and instruction manual

Features

SMART 1500RM2U line-interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during
brownouts and overvoltages, plus network grade AC surge suppression
1500VA/1000 watt power handling ability and full time sine wave output offers guaranteed compatibility with properly sized networking,
telecom and other sensitive electronic devices
Supports 2U rackmount installation in 4 post rack enclosures with included mounting accessories, 2 post mountable with optional
2POSTRMKITWM accessory, upright tower installation supported with optional 2-9USTAND accessory
Large internal batteries offer runtimes of 19 minutes at half load (750VA/500 watts) and 7 minutes at full load (1500VA/1000 watts)
Maintains regulated 120V nominal output during brownouts and overvoltages from 83 to 147V
Includes 8 UPS-supported outlets arranged in 2 individually controllable load banks (2 outlets per bank)
PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, email notification,
event logging and running user-defined script commands
Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional
SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software.
Communications ports support messaging of UPS and line power status, including on battery, low-battery, power restored, AC line voltage,
DC battery voltage and remaining battery capacity
Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for a delayed or immediate
reboot of connected devices
Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating
systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires
optional WATCHDOGSW)
Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
Emergency Power Off (EPO) interface with cable
Multi-function audible alarms and set of 5 front panel LEDs
Network-grade AC surge suppression
Attractive all-black color scheme
UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary
Two year warranty with $250,000 connected equipment insurance (USA & Canada only)

Specifications

SYSTEM OVERVIEW

Voltage compatibility 120V AC

Frequency
compatibility

60 Hz

OUTPUT

Output VA 1500

Output watts 1000

Output nominal
voltage

120V AC

Output voltage
regulation

LINE MODE: Sine wave line voltage 120V (-21% +8%), BATTERY MODE: Sine wave output within 5% of 120VAC

Output frequency
regulation

LINE MODE: Passes line frequency of 60Hz +/-10% BATTERY MODE: Inverter output regulated to 60Hz +/-0.5Hz

Outlet quantity / type 8 NEMA 5-15R

Customized load
management
receptacles

"Includes 2 load banks, each with 2 outlets that support load shedding and remote reboot on demand of locked network
devices. Controllable via PowerAlert software to switch off optional loads, like monitors, to increase available runtime for
servers and other critical devices. "

Overload protection 15A input breaker

INPUT

Maximum input
amps

10.4A / 1110 watts

Input connection
type

NEMA 5-15P

Input cord length 10 ft., 14 gauge