Tripp Lite SMART1500 User Manual

Download

Page 1

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +(773) 869 1234

E-mail: saleshelp@tripplite.com

Model #: SMART1500

SmartPro Tower UPS System - Intelligent, line interactive network power management system

Highlights

1500VA / 1.5kVA line interactive tower UPS

Maintains 120V nominal output over an input range of 75 to 147V

Network communications supported via USB port, serial port

Input: NEMA 5-15P (120V 15A) / Output: 6 NEMA 5-15R (120V)

2 year product warranty / $250,000 Ultimate Lifetime Insurance (USA, Puerto

Rico & Canada only)

Description

Tripp Lite's SMART1500 intelligent, line interactive UPS system protects servers, networking accessories and telecommunications equipment from

blackouts, voltage fluctuations and transient surges. Large internal batteries offer 20 minutes half load runtime and 7 minutes at full load during

power failures. 1500VA/980 watt power handling capability supports a variety of networking, telecom and various other application types, including

the support of multiple network workstations. Includes a total of 6 outlets, 1 of which can be individually powered on and off via software interface to

selectively reboot remote equipment or to automatically shed less significant loads to extend battery runtime for more critical equipment. Supports

remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Includes PowerAlert UPS monitoring and

unattended shutdown software with complete cabling. Supports SNMP with optional SNMPWEBSOLO external adapter. Built-in audible alarm and 5

front panel LEDs indicate status of line power, battery power, battery low/replace, voltage regulation and load level. Wall mountable with optional

UPSWM wallmount bracket. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from

transient surges. Attractive, small-footprint tower housing uses less than 66 square inches of floor or desktop space. Two year warranty with

$250,000 connected equipment insurance (USA & Canada Only).

Applications

Ideal for the protection of fileservers, network accessories and telecommunications equipment. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems. Ideal for sensitive electronic applications in areas where brownouts and overvoltages are common.

Package Includes

SMART1500 UPS System USB and DB9 monitoring cables PowerAlert unattended shutdown and UPS/Power monitoring software Instruction manual with warranty information

Features

1500VA/980 watt power handling capability supports a variety of networking, telecom and various other application types Built-in voltage regulation and battery support, plus complete AC suppression prevents equipment damage, data loss and downtime Large internal batteries offer 20 minutes half load runtime and 7 minutes at full load during power failures Automatic Voltage Regulation (AVR) circuits with two boost and one voltage reduction level maintains usable 120V nominal output over an

Page 2

input voltage range of 75-147V Includes a total of 6 NEMA5-15R outlets, 1 of which can be individually powered on and off via software interface to selectively reboot remote equipment or shed less significant loads to extend battery runtime for more critical equipment Includes 1 USB and 1 DB9 monitoring port for remote monitoring of UPS status and site power conditions Communications ports enable safe unattended shutdown without data loss during extended power failures Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power-restored, AC line voltage, DC battery voltage and battery capacity Communications ports support timed inverter shutoff after unattended shutdown, activate self-test and 10 second reboot of connected equipment PowerAlert UPS monitoring and unattended shutdown software with complete cabling included Supports Tripp Lite's WatchDog software application to restore unresponsive programs by automatically restarting them and rebooting completely locked computers by automatically switching UPS power off and back on again Notification of system status via 5 LEDs and multi-function audible alarms Wall mountable with UPSWM wallmount bracket Attractive small footprint beige tower housing uses less than 66 square inches Hot-swappable/user replaceable batteries allow on-site battery replacement Cold start capability enables UPS turn-on in battery mode during blackout conditions UL (USA), cUL (Canada), NOM (Mexico), Class A (Emissions) $250,000 Ultimate Lifetime Insurance (USA and Canada only) 2 year manufacturers product warranty with $250,000 connected equipment insurance (USA & Canada Only)

Specifications

SYSTEM OVERVIEW

Voltage compatibility

120V AC

Frequency compatibility

60 Hz

OUTPUT

Output VA 1500

Output watts 980

Output nominal voltage

120V AC

Output voltage regulation

LINE MODE: Sine wave line voltage 120V (-18% / +8%) BATTERY MODE: PWM sine wave output 115V +/-5%

Output frequency regulation

LINE MODE: Passes line frequency of 60Hz +/-10% BATTERY MODE: Inverter output regulated to 60Hz +/-0.5Hz

Outlet quantity / type

6 NEMA 5-15R

Customized load management receptacles

"Individually controllable outlet supports load shedding and remote reboot on demand of locked network devices. Controllable via PowerAlert software to switch off optional loads, like monitors, to increase available runtime for servers and other critical devices."

Overload protection

Circuit breaker

INPUT

Maximum input amps

12A / 1070 watts

Input connection type

NEMA 5-15P

Input cord length 6 ft., 14 gauge

Recommended Electrical Service

15A 120V

BATTERY

Full load runtime 7 minutes (1500VA)

Half load runtime 20 minutes (750VA)

Page 3

DC system voltage

36 V DC

Typical battery lifespan

3-6 years, depending on usage

Battery recharge rate

2-4 hours to 90%

Replacement Battery Cartridge

RBC53

VOLTAGE REGULATION

Voltage regulation description

Automatic Voltage Regulation (AVR) circuits maintain clean, regulated computer-grade 120V nominal output, without using battery power, during brownouts to 75V and overvoltages to 147V

Overvoltage correction

Input voltages between 128 and 147V AC are reduced by 12%

Direct pass through

Input voltages between 108 and 127V AC are passed on to connected equipment unchanged

Brownout correction

Input voltages between 93 and 107V AC are boosted by 14%

Severe brownout correction

Input voltages between 75 and 92V AC are boosted by 30%

LEDS ALARMS & SWITCHES

Front panel LEDs Includes 5 front panel LEDs to indicate BATTERY CHARGE LEVEL, AC LINE POWER STATUS, VOLTAGE REGULATION

STATUS, UPS LOAD LEVEL and BATTERY LOW / REPLACE information

Alarms Audible alarm indicates power failure conditions (4 short beeps every 10 seconds), overload (continuous short beeps) and

low battery (continuous tone)

Switches Yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions

SURGE / NOISE SUPPRESSION

AC surge suppression

480 joules

AC suppression response time

Instantaneous

EMI / RFI AC noise suppression

Yes

PHYSICAL

Shipping weight (lbs)

42.6

Shipping weight (kg)

19.4

Unit weight (lbs) 38.4

Unit weight (kg) 17.5

Unit Dimensions (HWD/in)

12.75 x 7.5 x 9

Unit Dimensions (HWD/cm)

32.4 x 19.1 x 22.9

Material of construction

PVC

Form factors supported

Tower

Cooling method Built-in rear exit cooling fan

Battery Access Battery access door allows hot swap battery replacement without powering connected equipment off

ENVIRONMENTAL

Page 4

Relative Humidity 0 to 95%, non-condensing

Storage Temperature

+5 to +122 degrees Fahrenheit

Operating Temperature

+32 to +104 degrees Fahrenheit

COMMUNICATIONS

Network monitoring port

Includes 2 built-in monitoring ports, 1-USB & 1-DB9. Each supports on battery, low battery, power restored, AC line voltage, DC battery voltage, load percentage, battery charge current, battery capacity, internal UPS temperature, line frequency status messaging. Interface supports timed inverter shutoff after unattended shutdown, activate self-test and 10 second reboot of connected equipment. Supports individual reboot of selected items connected to load management receptacles and load shedding to increase battery runtime for the most critical loads. Compatible with Tripp Lite's PowerAlert and Watchdog service software.

Software and cabling included

Includes PowerAlert UPS monitoring software for all common network and standalone operating systems. Ships with 2 cables, 1-USB to USB & 1-DB9 to DB9

SNMP compatibility

Yes via external SNMP adapter accessory #SNMPWEBSOLO

WatchDog compatibility

Yes, compatible with Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot of application / OS or hard power off/on reboot of connected equipment - ideal for unattended kiosk applications

LINE / BATTERY TRANSFER

Transfer time from line power to battery mode

2-4 milliseconds

Low voltage transfer to battery power

Switches to battery power as line voltage decreases to 75 volts or less. Resets back to line power mode as line voltage increases to 79V or higher.

High voltage transfer to battery power

Switches to battery power as line voltage increases to 147 volts or higher. Resets back to line power mode as line voltage decreases to 143V or less.

SPECIAL FEATURES

Cold Start Yes, inverter can be "cold started" to enable temporary AC output during a power failure

Appearance Attractive gray tower UPS

CERTIFICATIONS

Certifications Tested to UL1778 (USA), cUL (Canada), Class A (emissions), NOM (Mexico)

WARRANTY

Product Warranty Period

2 year product warranty

Connected Equipment Coverage

$250,000 connected equipment insurance (USA / Canada only)

Optional Coverage

3-5 year warranties, plus next day and on-site warranty coverage available for select opportunities. Contact Tripp Lite for additional information

Tripp Lite SMART1500 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual