Tripp-Lite SM2200RMXL2UTAA Specifications

TAA SmartPro 120V 2.2kVA 1.92kW Line-Interactive

Highlights

Compliant with the Federal Trade

Agreements Act (TAA) for GSA

Schedule purchases

2.2kVA / 2200VA / 1920W line

interactive 2U rack/tower UPS,

Sine Wave

120V output, Corrects brownouts

and overvoltages from 83V to

145V

0.9 Power Factor, Interactive

LCD interface

Extended runtime options up to

1600W

4 post compatible mounting

accessories

96% line-mode efficiency, 2

switched load banks

USB, RS232, EPO and slot for

network communication card

options

120V NEMA 5-20P input, 4

NEMA 5-15R & 4 NEMA

5-15/20R outlets

Package Includes

SM2200RMXL2UTAA TAA

Compliant UPS system

PowerAlert software with USB,

Serial & EPO cabling

4 post installation kit

Owner's manual

Sine Wave UPS, 2U, Extended Run, Network Card
Options, LCD, USB, DB9

MODEL NUMBER: SM2200RMXL2UTAA

Description

The SM2200RMXL2UTAA is compliant with the Federal Trade Agreements Act(TAA) for GSA Schedule

purchases. Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power

protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power

Supply(UPS) with built-in Auto-Voltage Regulation(AVR) actively corrects brownouts and overvoltages back to

usable levels while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration

excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight

undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed

UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover

from line to battery power occurs within milliseconds to maintain operation of connected equipment without

interruption or reboot. 96% line-mode efficiency offers reduced heat emissions and operating costs.

Communications interfaces support communications via USB, DB9 serial and a slot for an optional network

management card, such as Tripp Lite's SNMPWEBCARD. HID-compliant USB port enables integration with

built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment

load levels, self-test data and utility power conditions. Includes PowerAlert monitoring software and complete cabling. Switched output load banks enable

scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off(EPO) interface. LCD display panel easily rotates for viewing

in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test.

Field-replaceable, hot-swappable battery modules.

Features

Compliant with the Federal Trade Agreements Act(TAA) for GSA Schedule purchases

Tripp Lite SMART2200RMXL2U line interactive 2U rack/tower UPS with 2200VA / 2.2kVA / 1920W capacity and extended runtime optionsLine interactive

UPS with Automatic Voltage Regulation(AVR) corrects brownouts and overvoltages from 83 to 145V

NEMA 5-20P input plug; 4 NEMA 5-15/20R and 4 5-15R output receptacles, Two independently switched output load banks

Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages

High 96% efficiency rating in line-power mode offers reduced power consumption and BTU emisssions

Internal batteries offer 12 minutes at 50% load(960W) and 4.5 minutes at 100% load(1920W)

Extended runtime is available with optional BP48V24-2U / BP48V242UTAA(limit 1) OR BP48V60RT3U / BP48V60RT3UTAA(no limit), Output is reduced

to 1600 watts maximum with external battery packs

External battery configurations require the use of Tripp Lite's External Battery Configuration Software(see manual)

Hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no disruption to connected equipment

Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens

of detailed UPS and site power information

LCD interface also supports a number of advanced user setup and operating preferences

Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation; Optional 2-9USTAND

enables tower placement

Communications interfaces support communications via USB, DB9 serial and slot for network management card options, such as Tripp Lite's

SNMPWEBCARD.

HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X

Included PowerAlert UPS monitoring software; Built-in Emergency Power Off(EPO) interface with cable

Specifications

OUTPUT

Output Volt Amp Capacity (VA) 2200

Output kVA Capacity (kVA) 2.2

Output Watt Capacity (Watts) 1920

Output kW Capacity (kW) 1.92

Output Capacity Details Output is reduced to 1600 watts maximum when used with external battery packs

Power Factor 0.87

Nominal Output Voltage(s)
Supported

Nominal Voltage Details 120v nominal output in battery mode

Frequency Compatibility 60 Hz

Output Voltage Regulation (Line
Mode)

Output Voltage Regulation (Battery
Mode)

Output Receptacles (4) 5-15R; (4) 5-15/20R

Load Management Receptacles Two switched single outlet load banks (1 5-15/20R & 1 5-15R)

Output AC Waveform (AC Mode) Sine wave

Output AC Waveform (Battery Mode) Pure Sine wave

INPUT

110V; 115V; 120V

-14%, +6%

+/- 5%

Rated input current (Maximum Load) 16A (120V)