Tripp Lite SM1000RMNAFTA User Manual

Download

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +(773) 869 1234

E-mail: saleshelp@tripplite.com

Model #: SM1000RMNAFTA

Smart Pro Rack/Tower UPS - NAFTA assembled version of SMART1000RM2U

Highlights

1000VA / 1kVA line interactive 1U rackmount UPS

Maintains sine-wave 120V nominal output over an input range of 83 to 147V

Network communications supported via USB port, serial port, SNMP/Web card

slot and EPO interface

Current monitoring and switched PDU control via 2 single-outlet load banks

Input: NEMA 5-15P (120V 15A) / Output: 6 NEMA 5-15R (120V)

2 year product warranty / $250,000 Ultimate Lifetime Insurance (USA, Puerto

Rico & Canada only)

Description

1000VA line interactive UPS for server, network and telecommunications equipment/1U rackmount form factor/Corrects brownouts and

overvoltages from 83 to 147/Sine wave output in both AC and battery mode/Uninterruptible Power Supply (UPS) maintains battery derived AC output

during blackouts and severe voltage fluctuations/NEMA 5-15P input plug/Network-grade AC surge and noise suppression/Network management

interfaces includes USB port, DB9 serial port and SNMPWEBCARD slot/Supports simultaneous detailed monitoring of equipment load levels,

self-test data and mains power conditions via all 3 network interfaces at once/Includes PowerAlert monitoring software and complete

cabling/Emergency Power Off (EPO) interface/Integrated 2 bank switched PDU/3 stage metered current monitoring and battery charge LEDs/Mains

power and voltage regulation LEDs/Audible alarm/Self-test/Supports 2 or 4 post rackmount installation/Field replaceable, hot swappable internal

batteries/Attractive all-black UPS design/Two year warranty with $250,000 connected equipment insurance/Extended warranty and service contracts

available

Applications

Ideal for protection of fileservers, network accessories and telecommunications equipment in server rooms, internetworking closets, co-location racks, kiosks and a variety of other locations. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems.

Package Includes

SM1000RMNAFTA UPS System Mounting hardware Cabling for USB & DB9 monitoring and EPO switching PowerAlert unattended shutdown and UPS/Power monitoring software Warranty information and instruction manual

Features

1000VA/640 watt output power capacity compatible with North American 120V/60Hz power 1U rackmount UPS installs in standard 2 or 4 post 19 inch racks with a depth of only 16.75 inches Protects sensitive networking equipment from blackouts, voltage fluctuations and transient surges Regulation (AVR) corrects inputs from 83-147VAC back to usable 120V levels without consuming battery power Line interactive Automatic Voltage Regulation (AVR) corrects inputs from AVR circuits boost undervoltages by 14% depending on the severity and reduces overvoltages by 12%

Network interfaces support simultaneous communications via USB, DB9 serial and SNMPWEBCARD slot Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP Communications ports support on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, internal UPS temperature, AC line frequency, timed inverter shutoff, activate self-test and load bank output power control Built in Emergency Power Off (EPO) interface with cable Sine wave output in AC and battery modes Half load runtime of 15 minutes (500VA/320 watts)/Full load runtime of 7 minutes (1000VA/640 watts) Includes 6 NEMA 5-15R output receptacles arranged in 2 switchable single-outlet load banks Integrated 2 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual devices 3 stage metered LEDs offer current monitoring and battery charge level Mains power and voltage regulation LEDs offer at-a-glance power status information Front panel switches support self-test and alarm cancel functions UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user required UL (USA), cUL (Canada), NOM (Mexico), FCC Class A (Emissions) listed 2 year manufacturer's product warranty, $250,000 Ultimate Lifetime Insurance

Specifications

SYSTEM OVERVIEW

Voltage compatibility 120 VAC

Frequency compatibility

60 Hz

OUTPUT

Output VA 1000

Output watts 640

Output nominal voltage

120VAC sine wave output in AC and battery mode

Output voltage regulation

LINE MODE: Sine wave line voltage 120V (-21% +8%), BATTERY MODE: Sine wave output within 5% of 120VAC

Output frequency regulation

LINE MODE: Passes line frequency of 60Hz +/-10% BATTERY MODE: Inverter output regulated to 60Hz +/-0.5Hz

Outlet quantity / type 6 NEMA 5-15R

Customized load management receptacles

"Includes 2 load banks, each with 2 outlets that support automated load shedding and remote reboot on demand of locked network devices. Configurable via PowerAlert software to automatically switch off optional loads, like monitors, to increase available runtime for servers and other critical devices. "

Overload protection Via 15A input breaker

INPUT

Maximum input amps

9.2A

Input connection type

NEMA 5-15P

Input cord length 10 ft., 14 gauge

Recommended Electrical Service

15A 120V

BATTERY

Full load runtime 7 minutes (640 watts)

Half load runtime 15 minutes (320 watts)

DC system voltage 24 VDC

Typical battery lifespan

3-6 years, depending on usage

Battery recharge rate 2-4 hours to 90%

Replacement Battery Cartridge

RBC64-1U

VOLTAGE REGULATION

Voltage regulation description

Line interactive voltage regulation system corrects input voltages between 83 and 147 back to usable 120V nominal levels.

Overvoltage correction

Input voltages between 128 and 147 are reduced by 12%

Brownout correction Input voltages between 83 and 107 are boosted by 14%

LEDS ALARMS & SWITCHES

Front panel LEDs 5 front panel LEDs - Green POWER LED, 3 color BATTERY CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red

BATTERY WARNING LED.

Alarms 3 function audible alarm indicates power failure conditions (4 short beeps every 10 seconds), overload (continuous short

beeps) and low battery (continuous tone)

Switches Yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions

SURGE / NOISE SUPPRESSION

AC surge suppression

480 joules

AC suppression response time

Instantaneous

EMI / RFI AC noise suppression

Yes

PHYSICAL

Shipping weight (lbs)

Shipping weight (kg) 16.3

Shipping Dimensions (HWD/in)

6.25 x 23.5 x 22.5

Shipping Dimensions (HWD/cm)

15.9 x 60 x 57.2

Unit weight (lbs) 32

Unit weight (kg) 14.5

Unit Dimensions (HWD/in)

1.75 x 17.5 x 16.75

Unit Dimensions (HWD/cm)

44.5 x 44.5 x 42.5

Material of construction

Steel

Form factors supported

Rack (1U)

Cooling method Built-in cooling fan

Battery Access Battery access door allows hot swap battery replacement without powering connected equipment off

ENVIRONMENTAL

Relative Humidity 0 to 95%, non-condensing

Storage Temperature +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Operating Temperature

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

Line mode BTU/hr. (Max.)

55.8

Battery mode BTU/hr. (Max.)

189.2

COMMUNICATIONS

Network monitoring port

Includes 2 built-in monitoring ports, 1-USB & 1-DB9. Each supports on battery, low battery, power restored, AC line voltage, DC battery voltage, load percentage, battery charge current, battery capacity, internal UPS temperature and line frequency status

Software and cabling included

Includes PowerAlert UPS monitoring software for network and standalone operating systems. Ships with complete USB and DB9 cabling.

SNMP compatibility Built-in accessory slot accommodates internal SNMP / Web card and other network accessories

WatchDog compatibility

Yes, compatible with Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot of application / OS or hard power off/on reboot of connected equipment - ideal for unattended kiosk applications

LINE / BATTERY TRANSFER

Transfer time from line power to battery mode

2-4 milliseconds

Low voltage transfer to battery power

83V (resets to line power as line voltage increases to 87V or higher)

High voltage transfer to battery power

147V (resets to line power as line voltage decreases to 143V or lower)

SPECIAL FEATURES

EPO port Includes RJ11 EPO (emergency power off) port and cable

TVSS grounding Includes back panel grounding point with thumbscrew for data line surge suppressors and other network accessories

requiring a safe grounding point

Cold Start Yes, inverter can be "cold started" to enable temporary AC output during a power failure

Appearance Attractive black color scheme

CERTIFICATIONS

Certifications Tested to UL1778 (USA), cUL (Canada), Class A (emissions), NOM (Mexico)

WARRANTY

Product Warranty Period

2 year product warranty

Connected Equipment Coverage

$250,000 connected equipment insurance (USA / Canada only)

Optional Coverage 3 year, 5 year, next day and on-site warranty coverage available for select opportunities

Tripp Lite SM1000RMNAFTA User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual