TAA-Compliant SmartPro® 120V 1kVA 800W
Line-Interactive Sine Wave UPS, 1U, SNMP Card
Option, USB, 6 Outlets, ENERGY STAR
MODEL NUMBER: SM1000RM1UTAA
Description
The SM1000RM1UTAA SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS provides battery backup
and AC power protection against blackouts, brownouts, power surges and line noise that can damage electronics
or destroy data. Ideal for backing up servers and network storage devices, the SM1000RM1UTAA switches to 1kVA/800W battery mode in milliseconds to
keep your connected equipment running long enough to save files and shut down safely with no data loss.
Two of the six NEMA 5-15R outlets may be switched off remotely to reboot equipment or shed nonessential loads to maximize battery backup time for
mission-critical equipment. The internal battery provides 14 minutes of support at half load(400W) and four minutes at full load(800W). Operating with a high
99% line mode efficiency, the ENERGY STAR-certified SM1000RM1UTAA saves you money by meeting strict EPA guidelines.
Automatic voltage regulation(AVR) maintains 120V nominal output over an input range of 83V to 147V without using battery power. EMI/RFI noise filtering
improves your equipment’s performance and prevents damage. A 450-joule surge suppression rating protects your equipment from harmful power surges.
With Tripp Lite’s included PowerAlert® software, the SM1000RM1UTAA enables safe unattended system shutdown and file saves in case of a prolonged
power failure. Adding an optional Tripp Lite SNMPWEBCARD accessory card permits remote management of the UPS, including reboots and activity logs.
Features
Protects Mission-Critical Rack-Mounted Equipment
Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
Audible alarm signals loss of utility power, overload and low battery
6 NEMA 5-15R outlets
10 ft. power cord with 120V NEMA 5-15P input
450-joule surge suppression rating
Reliable Battery Backup
Supports half load up to 14 min. and full load up to 4 min.
Highlights
Corrects under- and overvoltages
from 83V to 147V
6 NEMA 5-15R outlets—2
switchable via network interface
Network power management and
control capability
Meets strict ENERGY STAR
efficiency guidelines
14 min. runtime at half load; 4
min. at full load
Package Includes
SM1000RM1UTAA SmartPro
120V 1kVA 800W
Line-Interactive Sine Wave UPS
USB cable
DB9 cable
EPO cable
PowerAlert software
Mounting hardware
Owner’s manual
1 / 5
Internal batteries designed for hot-swap field replacement
Switchable Outlets
2 load banks, each with one outlet controllable remotely to reboot equipment or shed nonessential loads
Automatic Voltage Regulation(AVR)
Maintains 120V nominal output over input range of 83V–147V without using battery power
EMI/RFI Line Noise Filtering
Removes electromagnetic and radio frequency interference that can disrupt or damage equipment’s performance
ENERGY STAR Certification
99% line mode efficiency saves money and energy and protects environment by meeting strict EPA efficiency guidelines
LED Indicators
Front-panel LEDs signal power, voltage correction, load level and battery charge state
SNMP/Web Capability
Optional Tripp Lite SNMPWEBCARD permits remote management of UPS, including reboots, configuration, updates and activity logs
Communications Ports
USB and DB9 ports combine with included PowerAlert software to monitor operating conditions, monitor AC power, and enable safe unattended system
shutdown and file saves in case of a prolonged power failure
EPO port supports emergency shutdown in large facilities
Versatile Installation Options
Hardware included for mounting in 1U of EIA-standard 19 in. 2- or 4-post rack
Optional 4POSTRAILKIT1U accessory available for extra support in 4-post installations
TAA Compliant
Complies with Federal Trade Agreements Act(TAA) for GSA Schedule purchases
Specifications
OUTPUT
Output Volt Amp Capacity (VA) 1000
Output kVA Capacity (kVA) 1
Output Watt Capacity (Watts) 800
Power Factor 0.8
Nominal Output Voltage(s)
Supported
110V; 115V; 120V
Nominal Voltage Details 120v nominal output in battery mode
2 / 5
Frequency Compatibility 60 Hz
Output Voltage Regulation (Line
Mode)
-21%, +8%
Output Voltage Regulation (Battery
Mode)
+/- 5%
Output Receptacles (6) 5-15R
Load Management Receptacles Two switchable single-outlet 5-15R load banks
Output AC Waveform (AC Mode) Sine wave
Output AC Waveform (Battery Mode) Pure Sine wave
INPUT
Rated input current (Maximum Load) 9.0A
Nominal Input Voltage(s) Supported 120V AC
UPS Input Connection Type 5-15P
Input Circuit Breakers 15A
Recommended Electrical Service 15A 120V
Input Cord Length (ft.) 10
Input Cord Length (m) 3
Input Phase Single-Phase
BATTERY
Full Load Runtime (min.) 4 min. (800w)
Half Load Runtime (min.) 14 min. (400w)
DC System Voltage (VDC) 24
Battery Recharge Rate (Included
Batteries)
Less than 4.5 hours from 10% to 90%
Internal UPS Replacement Battery
Cartridge
RBC69-1U
Battery Access Front panel battery access door
Battery Replacement Description Hot-swappable, user replaceable batteries
Expandable Runtime No
VOLTAGE REGULATION
Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147
Overvoltage Correction Input voltages between 128 and 147 are reduced by 12%
Undervoltage Correction Input voltages between 83 and 107 are boosted by 14%
USER INTERFACE, ALERTS & CONTROLS
3 / 5
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation
Alarm Cancel Operation
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
Audible Alarm Audible alarm indicates power-failure, overload and low-battery conditions
LED Indicators 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
SURGE / NOISE SUPPRESSION
UPS AC Suppression Joule Rating 450 joules
UPS Dataline Suppression 1 line TEL/DSL or Ethernet
EMI / RFI AC Noise Suppression Yes
AC Suppression Response Time Instantaneous
PHYSICAL
Included Mounting Accessory
Description
Included mounting brackets support 2 and 4 post rackmount installation; Optional 4POSTRAILKIT1U is available for
additional support
Installation Form Factors Supported
with Included Accessories
4 post 19 inch rackmount; 2 post 19 inch rackmount
Primary Form Factor Rackmount
UPS Power Module Dimensions
(hwd, in.)
1.75 x 17.5 x 16.75
UPS Power Module Dimensions
(hwd, cm)
4.4 x 44.4 x 42.5
Rack Height (U Spaces) 1
UPS Power Module Weight (lbs.) 32
UPS Power Module Weight (kg) 14.5
UPS Shipping Dimensions (hwd / in.) 6.2 x 23.5 x 22.5
UPS Shipping Dimensions (hwd /
cm)
15.9 x 59.7 x 57.2
Shipping Weight (lbs.) 36
Shipping Weight (kg) 16.3
Cooling Method Fan
UPS Housing Material Steel
ENVIRONMENTAL
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load) 39
4 / 5
AC Mode Efficiency Rating (100%
Load)
99%
COMMUNICATIONS
Communications Interface USB; DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface
Network Monitoring Port Description Supports detailed monitoring of UPS and site power conditions
PowerAlert Software Included
Communications Cable USB and DB9 cabling included
WatchDog Compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer Time 5 milliseconds AC to DC; 1 millisecond DC to AC
Low Voltage Transfer to Battery
Power (Setpoint)
83
High Voltage Transfer to Battery
Power (Setpoint)
147
SPECIAL FEATURES
Grounding Lug Back panel grounding lug
Cold Start (Startup in Battery Mode
During a Power Failure)
Cold-start operation supported
High Availability UPS Features Hot swappable batteries
Green Energy-Saving Features Greater than 95% efficiency - GREEN UPS; Individually controllable load banks
CERTIFICATIONS
UPS Certifications
Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A
(EMI); TAA Compliant; ENERGY STAR Qualified
WARRANTY
Product Warranty Period (Worldwide) 2-year warranty, 3 year with registration. Note:
Registration is required
for 3-year warranty.
Connected Equipment Insurance
(U.S., Canada & Puerto Rico)
$250,000
Ultimate Lifetime Insurance
© 2016 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
http://www.tripplite.com/products/product-certification-agencies
5 / 5
Loading...