SmartOnline S3MX Series 3-Phase 380/400/415V
40kVA 36kW On-Line Double-Conversion UPS,
Parallel for Capacity and Redundancy, Single &
Dual AC Input
MODEL NUMBER: S3M40KXD
Highlights
●
Best-in-class footprint and
power density minimize space
requirements for up to 40kVA
●
Intuitive LCD interface offers key
performance, configuration and
diagnostics info
●
High efficiency (94% on-line,
98% ECO mode) helps reduce
operating costs
●
Add optional WEBCARDLX with
latest version of PADM20 for
enhanced remote management
●
Parallel for capacity and
redundancy up to 3 units
●
Single and dual AC input
capability
Highly efficient 94% on-line UPS with compact design protects mission-critical equipment against
downtime due to power disturbances.
Features
Battery Backup and VFI Operation Protect Critical LoadsThe SmartOnline® S3M40KXD IGBT UPS
supports the continuous availability of your most important loads through all power conditions, providing a
compact backup power platform that’s easy to manage and inexpensive to operate. Sophisticated voltage
and frequency independent (VFI) operation and advanced IGBT rectifier technology with DSP control
deliver reliable output power quality. Providing up to 40kVA of clean, continuous power, this 3-phase UPS
system is perfect for critical applications in IT, communications, corporate, commercial, retail, financial,
security, transportation, emergency and edge infrastructure environments.
Best-in-Class Footprint for Easy Integration into Your Network ApplicationThis on-line doubleconversion UPS system has a very small footprint of just 0.24 square meters. It requires less valuable
space in your facility, and you can install the UPS system in spaces that would previously have required
expensive retrofitting.
Efficient Operation and Design Reduces Cost of OwnershipThis UPS benefits from highly efficient
transformer-free double-conversion technology that delivers operating cost savings. It achieves 94%
efficiency in double-conversion mode and up to 98% in ECO mode, reducing your power and cooling
costs. A low THDi (<3%) improves generator compatibility. A low THDv (2%) and active power factor
correction improve output performance. The hardware and firmware platform design reduces the number
of unique boards, improving mean time to repair (MTTR) and resulting in reduced downtime. Built-in static
and maintenance bypass transfer UPS load to utility power during faults, overloads and maintenance,
which also avoids costly system downtime.
Supplies Reliable Battery Backup with Expandable Runtime OptionsInternal 10Ah batteries provide
15 minutes of support at half load and five minutes at full load with zero transfer time. Adding external
battery cabinets, such as BP480V10 (sold separately), provides extended runtime. The S3M40KX
automatically restarts after a lengthy power outage.
Intuitive LCD Interface Delivers Important Performance Information at a GlanceThe interactive frontpanel LCD interface displays critical operating conditions and diagnostic data, including operating mode,
input/output voltage, load, battery voltage, backup runtime and fault conditions. Four LEDs provide
information about line, bypass, battery and fault status.
Network Management Card Offers Remote Monitoring and ControlThe optional WEBCARDLX (sold
separately) with the latest version of PowerAlert Device Manager firmware (PADM20) provides enhanced
remote management capabilities, including customizable dashboard graphs to fit user preferences. The
PADM20 upgrade and Tripp Lite’s PowerAlert Element Manager (PAEM) software form a powerful tool for
Applications
●
Save space in tight data center
environments with best-in-class
small footprint
●
Back up essential equipment in
network, telecom, financial and
edge infrastructure applications
●
Maintain critical server-room
operations during all power
conditions, including short
blackouts
Package Includes
●
S3M40KXD SmartOnline S3MX
Series 3-Phase 380/400/415V
40kVA 36kW On-Line DoubleConversion UPS
●
RS-232 cable
●
Paralleling cable kit
●
Owner’s manual
1 / 5
expanding maintenance functions in large installations, including firmware update checks and backup and
restoration of device configurations.
Parallel Capability Provides Additional CapacityConnect up to three S3M40KXD units in parallel using
separate/shared battery cabinets for increased capacity or for redundancy.
2-Year Warranty Provides Peace of MindThe S3M40KXD is backed by a 2-year warranty, ensuring
reliability and performance.
Specifications
OVERVIEW
UPC Code 037332239761
UPS Type On-Line
INPUT
Rated input current (Maximum Load) 61A
Nominal Input Voltage(s) Supported 220/380V 3-PH Wye; 230/400V 3-PH Wye; 240/415V 3-PH Wye
Nominal Input Voltage Description 3-Phase Wye, 4 wire plus ground (L1, L2, L3, N, G)
UPS Input Connection Type Hardwire
Input Circuit Breakers 80A (3 pole)
Input Phase 3-Phase
Power Factor (Input) .99PF (100% load)
THDi <3% (100% load)
OUTPUT
Output Volt Amp Capacity (VA) 40000
Output kVA Capacity (kVA) 40.00
Output Watt Capacity (Watts) 36000
Output kW Capacity (kW) 36.00
Output Capacity Details Supports up to 100% load continuously in double conversion mode; Supports 100-110% load for 10 minutes, 110 to
Power Factor 0.9
Crest Factor 3:1
Frequency Compatibility 50 / 60 Hz; Supports 50 to 60 Hz and 60 to 50 Hz conversion
Frequency Compatibility Details Automatic frequency selection
Output Voltage Regulation (Line
Mode)
Output Voltage Regulation
(Economy Line Mode)
130% load for 1 minute and greater than 130% for 1 second before switching to bypass mode; Inverter mode is
automatically restored as load levels are reduced to less than 70%; Configuration options support up to 3 S3M30KX
systems wired in parallel for increased capacity or fault-tolerant, redundant operation
+/- 1%
+/-11V of nominal
2 / 5
Output Voltage Regulation (Battery
Mode)
+/- 1%
Output AC Waveform (AC Mode) Pure Sine wave
Output AC Waveform (Battery
Mode)
Nominal Output Voltage(s)
Supported
Pure Sine wave
220/380V 3-PH Wye; 230/400V 3-PH Wye; 240/415V 3-PH Wye
Output Receptacles Hardwire
Individually Controllable Load Banks No
BATTERY
Full Load Runtime (min.) 5 min. (36kW)
Half Load Runtime (min.) 14 min. (18kW)
Expandable Battery Runtime Supports extended runtime with optional external battery packs
Expandable Runtime Yes
External Battery Pack Compatibility <a class="productLink" href="//www.tripplite.com/external-ups-battery-pack-80-10-Ah-
battery~BP480V10">BP480V10</a>
DC System Voltage (VDC) +/- 240
Battery Recharge Rate (Included
Batteries)
9 hours to 90% (Internal batteries)
VOLTAGE REGULATION
Voltage Regulation Description Online, double-conversion power conditioning maintains output within 1% of the selected nominal voltage in online
mode
USER INTERFACE, ALERTS & CONTROLS
Front Panel LCD Display LCD DISPLAY: offers a variety of graphical, text and numeric information to indicate a wide range of UPS operation
and fault / warning conditions, including current operating mode, alarm status, load level, battery charge, input /
output voltage & frequency, estimated runtime and more (see user manual for a detailed listing)
Switches ON / ENTER BUTTON: turns the UPS on and confirms a selection from the settings menu; OFF / ESC BUTTON:
turns off the UPS and returns to the previous item in the settings menu; TEST / UP BUTTON: initiates UPS self-test
operation and advances to the next item in the settings menu; MUTE / DOWN BUTTON: silences the audible alarm
and advances to the previous item in the settings menu; Press TEST/UP & MUTE/DOWN buttons simultaneously for
1 second to enter or exit the settings menu (See user manual for detailed information)
Audible Alarm Alarms warn users of a variety of operational conditions: BYPASS MODE (beeps every 2 seconds), BATTERY
MODE (beeps every 4 seconds), FAULT MODE (beeps continuously), OVERLOAD (beeps twice per second),
OTHER WARNINGS (beeps once per second), FAULT (beeps continuously); All alarms can be silenced, except
OVERLOAD & OTHER WARNINGS conditions
LED Indicators 4 LEDs report BYPASS / LINE / BATTERY / FAULT modes
PHYSICAL
Cooling Method Fans
Installation Form Factors Supported
with Included Accessories
Tower
Primary Form Factor Tower
3 / 5
Primary UPS Depth (mm) 815
Primary UPS Height (mm) 1,000
Primary UPS Width (mm) 300
Shipping Dimensions (hwd / in.) 47.44 x 16.90 x 36.22
Shipping Weight (kg) 321.60
UPS Housing Material Steel
UPS Power Module Dimensions
(Height x Width x Depth, mm)
UPS Power Module Dimensions
(hwd, in.)
1000 x 300 x 815
39.37 x 11.81 x 32.08
UPS Power Module Weight (kg) 315.70
UPS Power Module Weight (lbs.) 696
ENVIRONMENTAL
Operating Temperature Range 0 to +40C (32-104F)
Storage Temperature Range 0 to +35C (32 to 95F) with battery; -15 to 60C (5 to +140F) without battery
Relative Humidity 5 to 95%, non-condensing
Operating Elevation (ft.) < 3280ft (Capacity de-rates by 1% for every 328ft over 3280ft )
Audible Noise <60dBA at 1meter
Operating Elevation (m) < 1000m (Capacity de-rates by 1% for every 100m over 1000m)
COMMUNICATIONS
Network Management Cards <a class="productLink" href="//www.tripplite.com/Web-Management-Accessory-
Card~WEBCARDLX">WEBCARDLX</a> ; <a class="productLink"
href="//www.tripplite.com/Programmable-RS-485-Management-Accessory-Card-for-Select-3-Phase-UPS-
Systems~MODBUSCARDSV">MODBUSCARDSV</a> ; <a class="productLink"
href="//www.tripplite.com/Programmable-Relay-I-O-Card-Tripp-Lite-SVTX-SVX-SV-UPS-
Systems~RELAYCARDSV">RELAYCARDSV</a>
Network Monitoring Port Description Card accessory slot supports network management interface or programmable I/O relay card options
Communications Cable DB9/RS-232 cable included
Communications Interface DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface
LINE / BATTERY TRANSFER
Transfer Time Zero transfer time Online to Battery, Inverter to Bypass 0ms (Synchronous), and Inverter to ECO mode < 10ms.
Low Voltage Transfer to Battery
Power (Setpoint)
High Voltage Transfer to Battery
Power (Setpoint)
120V (Ph-N), 208V (Ph-Ph) @50% load / 176V (Ph-N), 305V (Ph-Ph) @100% load
276V (Ph-N), 478V (Ph-Ph) @ 50% or 100% load.
SPECIAL FEATURES
Grounding Lug Yes
4 / 5
Cold Start (Startup in Battery Mode
During a Power Failure)
Cold-start operation supported
High Availability UPS Features Automatic inverter bypass; Manual bypass switch; Auto Probe Monitoring (requires WEBCARDLX); Zero transfer
Green Energy-Saving Features High efficiency economy mode operation
STANDARDS & COMPLIANCE
UPS Certifications CE
Certification Details IEC/EN 62040-1:2008+A1 (Safety); IEC/EN 62040-2:2006 (Category C3)
WARRANTY
Product Warranty Period (U.S. &
Canada)
Product Warranty Period
(International)
Product Warranty Period (Mexico) 2-year limited warranty
Product Warranty Period (Puerto
Rico)
3-Phase Warranty Statement Tripp Lite 3-Phase UPS Factory Warranty
time; On-Line/Double-Conversion
2-year limited warranty
2-year limited warranty
2-year limited warranty
© 2021 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
5 / 5
Loading...