Tripp Lite PV750FC User Manual

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +[phone]

E-mail: [e-mail]

Model #: PV750FC

PowerVerter Plus Inverter - Industrial-Strength Power for Heavy-Duty Applications

Highlights

12V DC input; 120V AC output; 2 outlets

750 watts continuous output

Peak surge output: OverPower (up to 1 hour) - 1125 watts, Double-Boost (up

to 10 seconds) - 1500 watts

High efficiency power conversion

Automatic overload protection

Description

Harness your vehicle's battery to efficiently power office equipment on the road or power tools at a work site. Continuously supplies up to 750 watts

of 120V AC power to 2 AC outlets from any 12V battery or automotive DC source. Supplies up to 1500 watts of peak surge power, providing the

startup power needed for power tools and equipment. Frequency control locks AC output at 60Hz for operating stability of motor loads. Includes a

set of high current DC input terminals for simple, permanent installation. Highly reliable large transformer design specializes in powering motors and

other inductive loads with high-current startup needs.

PowerVerter Plus Inverters accommodate "peak surge" demands by delivering more output power than their continuous rating. Compare the

"Continuous" and "Peak Surge" wattage ratings, and you'll find PowerVerter Plus Inverters supply up to double their output to easily handle

equipment start up and motor cycling requirements. The DoubleBoost feature provides up to 200% of the continuous output for up to 10 seconds,

providing the extra power needed to cold start heavy-duty tools and equipment. The OverPower feature delivers up to 150% of the continuous

output for up to 1 hour.

Applications

Ideal for power tools, pumps, fans, desktop computer systems, laptops, portable electronics, battery chargers for cell phones, pagers,

notepads and games, full size TV-VCR & stereo systems, camcorders, lighting and other AC applications under 750 watts continuous/1500

watts peak.

Package Includes

PV750FC inverter

Instruction manual

Features

Allows users to run large, motorized AC appliances from any 12V battery or automotive DC system

Converts 12V DC battery power to 120V AC power

750 watts continuous output power

Peak surge output: OverPower (up to 1 hour) - 1125 watts, Double-Boost (up to 10 seconds) - 1500 watts

2 outlets; DC input terminals for 12V battery connection

Frequency control for operating stability

High-efficiency operation conserves batteries to prolong run time

Diagnostic LEDs indicate load level (high, medium, and low) and battery charge (high, medium, and low)

DC fusing protects inverter against overload

RJ45 port allows connection of APS/PowerVerter Remote Switch (model APSRM4)

Specifications

SYSTEM OVERVIEW

Voltage compatibility Compatible with 12V DC automotive or battery power sources

Frequency
compatibility

60 Hz

OUTPUT

Output watts 750W (continuous)/1500W (peak)

Output nominal
voltage

120V

Output voltage
regulation

Maintains PWM sine wave output voltage of 120 V AC (+/-5%)

Output frequency
regulation

60 Hz (+/- 0.3 Hz)

Outlet quantity / type 2 AC outlets

Overload protection Circuit breaker - 8A

Continuous output
capacity (watts)

750

Peak output capacity
(watts)

1500

INPUT

Input connection type Set of 2 DC input terminals

Input cord length User supplies cabling. 4 gauge or larger recommended.

Recommended
Electrical Service

Requires 12V DC input source capable of delivering 72A for the required duration (when used at full capacity). For
automotive applications, professional hardwire installation with 200A battery system fusing is recommended.

Maximum input amps
/ watts

Full continuous load - 72A at 12V DC, No load - 2.2A at 12V DC

BATTERY

DC system voltage 12V

LEDS ALARMS & SWITCHES

Front panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7

levels reported). See manual for sequences.

Switches 3 position on/off/remote switch enables simple on/off power control plus "remote" setting that enables distant on/off

control of the inverter system when used in conjunction with optional PHYSICAL

Shipping weight (lbs) 18

Shipping weight (kg) 8.2

Shipping Dimensions
(HWD/in)

12.5 x 11 x 10.75

Shipping Dimensions
(HWD/cm)

31.8 x 27.9 x 27.3

Unit weight (lbs) 16

Unit weight (kg) 7.3

Unit Dimensions
(HWD/in)

7 x 8.75 x 9

Unit Dimensions
(HWD/cm)

17.8 x 22.2 x 22.9