Tripp Lite PV2400FC TECHNICAL SPECIFICATIONS
2400W PowerVerter Plus Industrial-Strength Inverter
with 2 Outlets
MODEL NUMBER: PV2400FC
Description
Continuously supplies up to 2400W of 120V AC power to 2 AC outlets from any 24V battery or automotive
DC source. Frequency control locks AC output at 60Hz for operating stability of motor loads. Includes a
set of high current DC input terminals for simple, permanent installation. Highly reliable large transformer
design specializes in powering motors and other inductive loads with high-current startup needs.
Highlights
●
Designed for heavy duty and
motor loads
●
24V DC input; 120V AC output;
2 outlets
●
2400W continuous output
●
Peak surge output: OverPower
(up to 1 hour)—3600W; Double-
Boost (up to 10
seconds)—4800W
●
High-efficiency power
conversion
●
Automatic overload protection
Package Includes
●
PV2400FC Inverter
●
Instruction manual
NOTE: To protect against high current draw that may occur during inverter failure, a fuse link rated at
250a should be positioned no more than 18" from the PV2400FC's battery in the positive line.
Features
●
Converts 24V DC battery power to 120V AC power
●
2400W continuous output power
●
Peak surge output: OverPower (up to 1 hour), 3600 watts; Double-Boost (up to 10 seconds), 4800W
●
Set of 2 bolt-down DC wiring terminals for 24V battery connection; 2 x NEMA 5-15/20R outlets
●
Frequency control for operating stability
●
High-efficiency operation conserves batteries to prolong run time
●
Diagnostic LEDs indicate load level (high, medium, and low) and battery charge (high, medium, and
low)
●
DC fusing protects inverter against overload
●
High-impact polycarbonate housing
●
RJ45 port allows connection of APS/PowerVerter Remote Switch (APSRM4)
Specifications
1 / 3
OVERVIEW
UPC Code 037332042200
INPUT
Recommended Electrical Service Requires 24V DC input source capable of delivering 120A for the required duration (when used at full capacity). For
automotive applications, professional hardwire installation with 250A battery system fusing is recommended
Maximum Input Amps / Watts Full continuous load - 120A at 24V DC; No load - 2.2A at 24V DC
Input Connection Type Set of 2 bolt-down DC wiring terminals
Input Cord Length Details User supplies cabling; 2/0 gauge or larger recommended
Voltage Compatibility (VDC) 24
OUTPUT
Frequency Compatibility 60 Hz
Pure Sine Wave Output No
Output (Watts) 2400
Nominal Output Voltage(s)
Supported
120V
Output Receptacles (2) 5-15R
Continuous Output Capacity (Watts) 2400
Peak Output Capacity (Watts) 4800
Output Voltage Regulation Maintains PWM sine wave output voltage of 120 V AC (+/-5%)
Output Frequency Regulation 60 Hz (+/- 0.3 Hz)
Overload Protection Circuit breaker
BATTERY
DC System Voltage (VDC) 24
USER INTERFACE, ALERTS & CONTROLS
Front Panel LEDs Set of 6 LEDs provides continuous status information on load percentage (6 levels reported) and battery charge level
(7 levels reported). See manual for sequences
Switches 3-position on/off/remote switch enables simple on/off power control plus "remote" setting that enables distant on/off
control of the inverter system when used in conjunction with optional <a class="productLink"
href="//www.tripplite.com/Remote-Control-Module-Tripp-Lite-PowerVerter-Inverters-InverterChargers~APSRM4">APSRM4</a> accessory
PHYSICAL
Cooling Method Fan
Form Factors Supported Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional
mounting information)
Material of Construction Polycarbonate
2 / 3
Loading...