1800W PowerVerter Automotive/Truck Inverter with 4 Outlets
MODEL NUMBER: PV1800HF
Description
Utilize your vehicle's battery to efficiently power office equipment on the road or power tools at a work site. Continuously supplies up to 1800 watts of 120V AC power to 4 AC outlets from any 12V battery or automotive DC source. Includes a set of nut-and-bolt style DC terminals for simple installation. Compact, lightweight metal case design is among the smallest, most rugged inverters available at this power level.
NOTE: To protect against high current draw that may occur during inverter failure, a fuse link rated at 250a should be positioned no more than 18" from the PV1800HF's battery in the positive line.
Features
●Allows users to run AC appliances from a properly sized 12V battery or automotive DC system
●Converts 12V DC battery power to 120V AC power
●1800 watts continuous output power; 3600 watts peak output power (instantaneous)
●4 outlets
●Compact, lightweight design with grooved surface for efficient cooling, all-metal housing
●Diagnostic LEDs indicates low battery voltage level and load level
●Low battery alarm with auto-shutoff prevents deep battery discharge
●High-efficiency operation conserves batteries to prolong run time
●Cooling fan regulates internal temperature and prolongs unit service life
Specifications
Highlights
●12V DC input; 120V AC output;
4 outlets
●1800 watts continuous output
●3600 watts peak output (instantaneous)
●Powers an entire mobile office
Package Includes
●PV1800HF Inverter
●Warranty information
●Instruction manual
OVERVIEW
1 / 3
UPC Code |
037332050069 |
|
|
|
|
INPUT |
|
|
Recommended Electrical Service |
Requires 12VDC input source capable of delivering 200A for the required duration (when used at full capacity). For |
|
|
automotive applications, professional hardwire installation with 250A battery system fusing is recommended. |
|
|
|
|
Maximum Input Amps / Watts |
Full continuous load - 200A at 12VDC, No load - 2.7A at 12VDC, Shutdown |
|
|
|
|
Input Connection Type |
Set of 2 DC bolt-down wiring terminals. User supplies cabling; minimum gauges for full load operation: 0 (16 ft max), |
|
|
00 or 2/0 (20 ft max) |
|
|
|
|
Voltage Compatibility (VDC) |
12 |
|
|
|
|
OUTPUT |
|
|
Frequency Compatibility |
60 Hz |
|
|
|
|
Pure Sine Wave Output |
No |
|
|
|
|
Output (Watts) |
1800 |
|
|
|
|
Nominal Output Voltage(s) |
120V |
|
Supported |
||
|
||
|
|
|
Output Receptacles |
(4) 5-15R |
|
|
|
|
Continuous Output Capacity (Watts) |
1800 |
|
|
|
|
Peak Output Capacity (Watts) |
3600 |
|
|
|
|
Output Voltage Regulation |
Maintains PWM sine wave output voltage of 115 VAC (+/- 8 VAC) |
|
|
|
|
Output Frequency Regulation |
60 Hz (+/- 3 Hz) |
|
|
|
|
Overload Protection |
Automatic overload protection shuts down inverter system in the event of overloads. |
|
|
|
|
BATTERY |
|
|
DC System Voltage (VDC) |
12 |
|
|
|
|
USER INTERFACE, ALERTS & CONTROLS |
||
Audible Alarm |
Dual-function alarm indicates overload conditions or low DC input voltage of 10.5V or less. |
|
|
|
|
PHYSICAL |
|
|
Cooling Method |
Fan |
|
|
|
|
Form Factors Supported |
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional |
|
|
mounting information) |
|
|
|
|
Material of Construction |
Aluminum, Steel |
|
|
|
|
Shipping Dimensions (hwd / cm) |
11.43 x 42.67 x 16.76 |
|
|
|
|
Shipping Dimensions (hwd / in.) |
4.50 x 16.80 x 6.60 |
|
|
|
|
Shipping Weight (kg) |
4.26 |
|
|
|
|
Shipping Weight (lbs.) |
9.40 |
|
|
|
|
Unit Dimensions (hwd / cm) |
10.16 x 15.24 x 38.1 |
|
|
|
2 / 3