Tripp Lite PV1250FC User Manual

Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model #: PV1250FC
Highlights
12V DC input; 120V AC output; 2 outlet
1250 watts continuous output
Peak surge output: OverPower (up to 1 hour) - 1875 watts, Double-Boost (up
to 10 seconds) - 2500 watts
High efficiency power conversion
Automatic overload protection
Description
Harness your vehicle's battery to efficiently power office equipment on the road or power tools at a work site. Continuously supplies up to 1250 watts
of 120V AC power to 2 AC outlets from any 12V battery or automotive DC source. Frequency control locks AC output at 60Hz for operating stability
of motor loads. Includes a set of high current DC input terminals for simple, permanent installation. Highly reliable large transformer design
specializes in powering motors and other inductive loads with high-current startup needs.
PowerVerter Plus Inverters accommodate "peak surge" demands by delivering more output power than their continuous rating. Compare the
"Continuous" and "Peak Surge" wattage ratings, and you'll find PowerVerter Plus Inverters supply up to double their output to easily handle
equipment start up and motor cycling requirements. A DoubleBoost feature provides up to 200% of the continuous output for up to 10 seconds,
providing the extra power needed to cold start heavy-duty tools and equipment. An OverPower feature delivers up to 150% of the continuous
output for up to 1 hour.
Applications
Ideal for power tools, pumps, fans, desktop computer systems, laptops, portable electronics, battery chargers for cell phones, pagers,
notepads and games, full size TV-VCR & stereo systems, camcorders, lighting and other AC applications under 1250 watts continuous/2500
watts peak.
Package Includes
PV1250FC inverter
Instruction manual
Features
Allows users to run large, motorized AC appliances from any 12V battery or automotive DC system
Converts 12V DC battery power to 120V AC power
1,250 watts continuous output power
Peak output power: OverPower (up to 1 hour) - 1875 watts, Double-Boost (up to 10 seconds) - 2500 watts
2 outlets; DC input terminals for 12V battery connection
Frequency control for operating stability
High-efficiency operation conserves batteries to prolong run time
Diagnostic LEDs indicate load level (high, medium, and low) and battery charge (high, medium, and low)
DC fusing protects inverter against overload
RJ45 port allows connection of APS/PowerVerter Remote Switch (manuf# APSRM4)
Specifications
SYSTEM OVERVIEW
Voltage compatibility Compatible with 12V DC automotive or battery power sources
Frequency compatibility
60 Hz
OUTPUT
Output watts 1250W (continuous)/2500W (peak)
Output nominal voltage
120V
Output voltage regulation
Maintains PWM sine wave output voltage of 120 V AC (+/-5%)
Output frequency regulation
60 Hz (+/- 0.3 Hz)
Outlet quantity / type 2 AC outlets
Overload protection Circuit breaker
Continuous output capacity (watts)
1250
Peak output capacity (watts)
2500
INPUT
Input connection type Set of 2 DC input terminals
Input cord length User supplies cabling. 4 gauge or larger recommended.
Recommended Electrical Service
Requires 12V DC input source capable of delivering 127A for the required duration (when used at full capacity). For automotive applications, professional hardwire installation with 200A battery system fusing is recommended.
Maximum input amps / watts
Full continuous load - 127A at 12V DC, No load - 2.2A at 12V DC
BATTERY
DC system voltage 12V
LEDS ALARMS & SWITCHES
Front panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences.
Switches 3 position on/off/remote switch enables simple on/off power control plus "remote" setting that enables distant on/off
control of the inverter system when used in conjunction with optional PHYSICAL
Shipping weight (lbs) 24.8
Shipping weight (kg) 11.2
Shipping Dimensions (HWD/in)
12.5 x 11 x 10.75
Shipping Dimensions (HWD/cm)
31.8 x 27.9 x 27.3
Unit weight (lbs) 23.2
Unit weight (kg) 10.5
Unit Dimensions (HWD/in)
7 x 8.75 x 9
Unit Dimensions (HWD/cm)
17.8 x 22.2 x 22.9
Material of construction
Polycarbonate
Loading...
+ 1 hidden pages