UL1363a, Paragraph 14.1(d) States "The SPRPT shall be permanently attached to the medical equipment
by a means such that it is only removable with the use of a tool." To achieve compliance, one must use
the PSCLAMP.
Safe-IT UL 1363A Medical-Grade Power Strip for
Patient-Care Vicinity, 6x 20A Hospital-Grade
Outlets, 25 ft. Cord
MODEL NUMBER: PS625HG20AOEM
Supplies power to movable plug-connected components mounted to IV poles, mobile carts, crash carts
and mobile medical workstations in operating rooms and patient-care areas.
Highlights
●
Patented antimicrobial coating is
99.9% effective in inhibiting the
growth of bacteria
●
Approved for use in patient-care
areas when properly mounted
●
Complies with UL 1363A
specifications
●
Features 6 NEMA 5-20R-HG
hospital-grade outlets
●
Features 25 ft. (7.6 m) cord with
NEMA 5-20P-HG hospital-grade
plug
Package Includes
●
PS625HG20AOEM UL 1363A
Medical-Grade Power Strip with
6 20A Hospital-Grade Outlets
●
Owner’s Manual with
maintenance requirements
Description
The PS625HG20AOEM Medical-Grade Power Strip supplies power to movable plug-connected
components mounted to a rack, table or pedestal in operating rooms, patient-care areas, therapy rooms,
imaging environments and administrative areas. Compliant with UL 1363A specifications, this 120V, 50/60
Hz power strip features a NEMA 5-20P-HG hospital-grade plug and six NEMA 5-20R-HG hospital-grade
outlets.
The power strip is protected by a patented antimicrobial powder coating with EPA-registered and FDAcompliant silver ionic technology. The antimicrobial surface protection is 99.9 percent effective in inhibiting
the growth of bacteria and reducing the risk of HAIs in hospitals and other medical environments. The
coating meets the requirements of JIS Z 2801:2000, an international standard for evaluating efficacy in
antimicrobial products.
Two resettable built-in 20A circuit breakers control power to all outlets and protect the power strip against
overloads. Switchless design prevents the unit from being accidentally shut off. Locking safety covers are
integrated to protect unused outlets from debris and damage. Extra-long 25-foot (7.6-meter) 20A AC
power cord gives you flexibility to roll the equipment where it’s most needed.
Mounting tabs and flanges let you install the PS625HG20AOEM on a wide variety of surfaces, such as IV
poles, mobile carts, crash carts and mobile medical workstations. All-metal housing ensures safety and is
guaranteed to last a long time in demanding environments.
Features
Power Distribution in Any Medical FacilityIdeal for operating rooms, administrative areas, patient-care
areas, therapy rooms and imaging environmentsAttaches easily to IV poles, mobile carts, crash carts and
mobile workstations120V, 50/60 Hz power strip complies with UL 1363A specifications
Exclusive, Patented Antimicrobial ProtectionSilver ionic powder coating is 99.9% effective in inhibiting
the growth of bacteriaPatented coating helps to reduce the risk of healthcare-acquired infections (HAIs) in
hospitals and other medical environmentsCoating meets the requirements of JIS Z 2801:2000, an
international standard for evaluating efficacy in antimicrobial products
1 / 3
Versatile Medical-Grade SolutionSix NEMA 5-20R-HG hospital-grade outlets provide consistent
powerExtra-long 25 ft. (7.6 m) 20A AC power cord with NEMA 5-20P-HG hospital-grade plug lets you
move the components where power is most neededRugged all-metal housing for long life in demanding
environments
Premium Safety FeaturesDual resettable built-in 20A circuit breakers protect against dangerous
overloadsSwitchless design prevents accidental shutoffIntegrated locking safety covers keep debris away
from unused outlets
Ready to Use Right from the BoxMounting tabs and flanges let you install the unit on a wide variety of
surfaces
Specifications
OVERVIEW
UPC Code 037332189103
INPUT
Nominal Input Voltage(s) Supported 120V AC
Recommended Electrical Service 20A, 120V
Input Plug Features Hospital Grade Plug
Input Cord Gauge Type 12 gauge; SJT
Voltage Compatibility (VAC) 120
Input Plug Type NEMA 5-20P-HG
Input Cord Length (ft.) 25
Input Cord Length (m) 7.62
Integrated Cord Clip No
OUTPUT
Frequency Compatibility 50 / 60 Hz
Output (Watts) 2400
Output Receptacles (6) 5-20R-HG
Circuit Breaker (amps) 20
Overload Protection 2 x 20amp breaker (1 line, 1 neutral)
Transformer Accommodation (2) Yes
Outlet Orientation Single row of 6
Right-Angle Outlets No
USER INTERFACE, ALERTS & CONTROLS
Switches No power switch
PHYSICAL
2 / 3
Color White
Antimicrobial Coating Yes
Color (AC Line Cord) White
Form Factors Supported IV poles, mobile carts, crash carts and mobile medical workstations
Included Mounting Accessories Mounting tabs and flanges
Integrated Keyhole Mounting Slots Yes (Includes flanges)
Keyhole Slot Mounting
Measurement (Center to Center)
Material of Construction Metal
Outlets Measurement (Center to
Center)
Receptacle Color White
Shipping Dimensions (hwd / cm) 36.58 x 10.16 x 18.03
Shipping Dimensions (hwd / in.) 14.40 x 4.00 x 7.10
Shipping Weight (kg) 2.63
Shipping Weight (lbs.) 5.80
Unit Dimensions (hwd / cm) 34.93 x 6.35 x 3.81
Unit Dimensions (hwd / in.) 13.75 x 2.5 x 1.5
Unit Weight (kg) 1.02
Unit Weight (lbs.) 2.25
SPECIAL FEATURES
Built-in Cable Management No
WARRANTY
Distance between end tabs = 330.20mm
38.7mm
Product Warranty Period
(Worldwide)
Lifetime limited warranty
© 2021 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
3 / 3
Loading...