Tripp Lite PDUV30HV User Manual
Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model #: PDUV30HV
Basic 0U Vertical Rack PDU - Power Distribution Unit for Network Applications
Highlights
Basic 0U 63.75 in. vertical rack PDU
208/240V 30A maximum capacity
10 ft. input cable with locking L6-30P plug
38 total output receptacles (6 C19, 32 C13)
Tooless button-mount installation
Cord retention brackets keep vital equipment plugs connected
Description
Tripp Lite Basic Power Distribution Units give IT Managers the ability to power multiple servers and vital networking hardware from a single input
power source. Switch-free unfiltered electrical pass-through reliably distributes UPS or generator power to critical equipment in rack enclosures,
network closets and more. Tooless mounting enables simple installation in button-mount compatible racks. Included mounting brackets support
vertical installation in standard 2 and 4 post racks or other surfaces, such as under-counter or wallmount configurations. Plug retention brackets keep
vital equipment plugged in and continuously powered.
PDUV30HV 63.75 in. vertical 0U rack PDU supports 30A maximum capacity at 208/240V (agency derated to 24A). Includes 10 ft. attached line cord
with L6-30P input plug. 32 C13 and 6 C19 outlets support up to 38 directly connected pieces of networking equipment. Outlets are arranged in two
separately breakered 15A load banks.
Applications
Ideal for network configurations where a basic non-metered, unswitched PDU is required to distribute UPS or generator power to multiple
pieces of networking equipment
Package Includes
PDUV30HV 63.75 inch basic PDU with owner's manual
Set of 2 plug retention brackets and installation hardware
Set of mounting brackets and installation hardware
Features
208/240V 30A Basic Power Distribution Unit (PDU) in 63.75 in. 0U vertical form factor.
30A maximum capacity (Agency derated to 24A)
Attached L6-30P input plug with 10 ft. line cord
38 total output receptacles (6 C19, 32 C13)
Outlets are arranged in two separately breakered 15A load banks (each with 3 C19 and 16 C13 outlets)
Circuit breaker offers protection from overloads and short circuit fault conditions
Sleeved circuit breaker assembly prevents accidental shutoff and requires no tools to reset if tripped
Switch-free unfiltered electrical pass-through reliably distributes UPS or generator power to critical networking equipment
Tooless installation supports fast installation in button-mount compatible equipment racks
Included nut and bolt mounting brackets support installation in non button-mount compatible racks or other flat surfaces, such as
under-counter and wallmount
Cord retention brackets keep vital equipment plugs connected
Specifications
SYSTEM OVERVIEW
Voltage compatibility 208/240V
Frequency
compatibility
50/60
OUTPUT
Output nominal
voltage
208/240V
Outlet quantity / type 38 total (6 C19, 32 C13)
Overload protection Outlets are arranged in two separately breakered load banks. The top 15A breaker covers outlets on the upper half, the
bottom 15A breaker covers outlets on the lower half of the PDU. Each breakered bank covers 16 C13 and 3 C19
outlets.
INPUT
Maximum input amps 30A maximum (Agency de-rated to 24A)
Input connection type L6-30P (208/240V 30A)
Input cord length 10 ft.
Recommended
Electrical Service
208V, 240V
LEDS ALARMS & SWITCHES
Switches n/a
PHYSICAL
Shipping weight (lbs) 13
Shipping weight (kg) 5.9
Shipping Dimensions
(HWD/in)
64.5 x 3.5 x 4.75
Shipping Dimensions
(HWD/cm)
163.8 x 8.9 x 12.1
Unit weight (lbs) 8
Unit weight (kg) 3.6
Unit Dimensions
(HWD/in)
63.75 x 2.25 x 3.75
Unit Dimensions
(HWD/cm)
162 x 5.7 x 9.5
Material of
construction
Aluminum
Form factors
supported
0u vertical installation in equipment racks, plus under-counter and wallmount
Style Vertical Rackmount, Wallmount, Raceway, Workbench
ENVIRONMENTAL
Relative Humidity 0-95% non-condensing
CERTIFICATIONS
Certifications Tested to UL60950-1 (USA, Canada), NOM (Mexico)
WARRANTY
Product Warranty
Period
Lifetime
Loading...