2.9kW Single-Phase Switched PDU, LX Platform,
Outlet Monitoring, 120V Outlets (24 NEMA 515/20R), L5-30P Plug, 0U, TAA
MODEL NUMBER: PDUMVR30NETLX
2.9kW vertical PDU with individual outlet metering distributes, monitors and manages single-phase power.
Built-in Java-free network interface helps you remotely monitor load levels to prevent overloads that cause
downtime.
Description
The PDUMVR30NETLX 2.9kW Single-Phase Switched PDU with individual outlet metering provides
advanced network control and remote power monitoring with the ability to turn on, turn off, reboot or lock
out power to each outlet. By reducing the frequency of on-site visits, these advanced remote capabilities
can save you money and reduce downtime.
The switched PDU features 24 individually controllable NEMA 5-15/20R outlets with included cord
retention brackets to prevent cables from becoming accidentally disconnected. A 10-ft. (3.05 m) power
cord with NEMA L5-30P plug connects the PDU to an AC source, generator or protected UPS.
The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU
status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports
10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2
modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported
include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, Telnet, SSH, CLI, FTP, DHCP
and NTP.
A digital ammeter allows you to monitor each load bank's current, each outlet's current and the total
connected PDU load in real time to ensure they remain well below maximum capacity with no danger of
overload. The switched PDU mounts in 0U of space in EIA-standard 19-inch racks using the included
toolless mounting buttons or the included rack-mounting brackets.
Highlights
●
2.9kW 120V single-phase
switched 70-inch 0U PDU
●
24 controllable NEMA 5-15/20R
outlets in 2 load banks
●
Pre-installed WEBCARDLX with
latest version of PADM20 for IPbased Auto Probe feature
●
Digital ammeter for on-site load
monitoring in real time
●
NEMA L5-30P input with 10-ft.
(3.05 m) AC power cord
Package Includes
●
PDUMVR30NETLX 2.9kW
Single-Phase Switched PDU
●
Built-in LX Platform interface
●
Configuration cable
●
Cord retention brackets
●
(24) Cable ties
●
Rack-mounting hardware
●
PDUMVROTATEBRKT
mounting bracket accessory
●
Owner’s manual
Features
Distributes, Monitors and Manages Network-Grade AC Power2.9kW 120V switched PDU with single-
phase inputNEMA L5-30P plug with 10-ft. (3.05 m) cord connects to compatible AC power
sourceFirmware upgrades support future product enhancements
24 Switched NEMA 5-15/20R Outlets Distribute AC PowerIndividual outlets can be remotely controlled
to power up, power down, reboot or lock out devicesIncluded cord retention brackets prevent cables from
becoming accidentally disconnected
Digital AmmeterReports current for each load bank, each individual outlet, and total PDU loadSupports
IP-address self-IDDigits flip 180° for easy reading at either angle
Built-In LX Platform InterfacePre-installed WEBCARDLX with the latest version of PowerAlert Device
Manager firmware (PADM20) provides enhanced remote management capabilitiesPADM20 and
PowerAlert Element Manager (PAEM) form a powerful tool for expanding maintenance functions in large
1 / 4
installations, including firmware update checks and backup and restoration of device configurationsIPbased Auto Probe detects lost connectivity and restores service autonomouslyAllows full remote access
for power monitoring with email notifications via secure web browser, SNMP, telnet or SSHSupports
10/100 Mbps auto-sensing for communication with an Ethernet networkOptional EnviroSense2 modules
(sold separately) provide a variety of environmental monitoring capabilitiesNo Java required
Broad Communications CompatibilitySupports IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2c,
SNMPv3, telnet, SSH, CLI, FTP, DHCP and NTPSupports automatic and manual assignment of IP
address
Essential Safety FeaturesTiered access allows administrator and guest to log in via web
browserImmediate alert notifications via email or SNMP trapsSupports user-specified alarm notification
thresholdsReal-time clock backup maintains day/date even if PDU is unpowered
Easy 0U Installation in EIA-Standard 19 in. Racks70 in. PDU mounts vertically using included toolless
buttons or rack-mounting bracketsIncluded PDUMVROTATEBRKT allows mounting with rear-facing
outlets
TAA-CompliantCompliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Specifications
OVERVIEW
UPC Code 037332204158
PDU Type Switched
INPUT
PDU Input Voltage 120V
Recommended Electrical Service Single-phase 30A 120V service
Maximum Input Amps 24
Maximum Input Amps Details Agency de-rated to 24A continuous
PDU Plug Type NEMA L5-30P
Input Phase Single-Phase
Input Cord Length (ft.) 10
Input Cord Length (m) 3.05
OUTPUT
Output Capacity Details 2.88kW (120V) / 24A total capacity; 20A max per breakered load bank; 16A max per outlet
Frequency Compatibility 50 / 60 Hz
Output Receptacles (24) 5-15/20R
Output Nominal Voltage 120V
Overload Protection Two 20A breakers protect 12 outlets each
Customized Load Management
Receptacles
USER INTERFACE, ALERTS & CONTROLS
Each outlet is individually controllable via remote interface
2 / 4
Front Panel LCD Display Digital display reports load level in amps for LOAD BANK 1 (Outlets 1-12), LOAD BANK 2 (Outlets 13-24), LOAD
BANKS 1&2 COMBINED (Outlets 1-24) and each individual output receptacle; Digital display can also be used to
scroll the configured IP address
Front Panel LEDs BANK 1 and BANK 2 LEDs verify which load bank the digital current display is reporting (Bank 1, Bank 2 or Banks
1&2 Combined); BANK 1 or BANK 2 LED will flash when the digital display is reporting output current for one of the
outlets in that load bank; 24 additional LEDs, one near each output receptacle, will light continuously to verify power
on/off status and flash to indicate that the digital display is reporting output current for just that individual receptacle.
Network Link/Activity Status LED (Yellow), Network Speed LED (Green); LX Platform status LED (Green)
Switches SELECT OUTLET and SELECT BANK switches advance the LCD screen and associated LED to display power
consumption for individual output receptacles and output load banks; Press and hold the SELECT BANK button for
4 seconds to rotate the digital display 90 degrees for overhead power input; Press and hold the SELECT OUTLET
button for 4 seconds to scroll the configured IP address. LX Platform Interface: Recessed reset switch for interface
reboot and factory reset
Current Measurement Accuracy
(Amps)
Voltage Measurement Accuracy
(Volts)
Power Measurement Accuracy
(Watts)
+/-1%
+/-1%
+/-1%
PHYSICAL
Form Factors Supported 0U vertical rackmount; includes rackmount brackets. Supports toolless mounting in button-mount compatible racks
PDU Form Factor Vertical (0U)
Shipping Dimensions (hwd / cm) 13.72 x 17.27 x 193.29
Shipping Dimensions (hwd / in.) 5.40 x 6.80 x 76.10
Shipping Weight (kg) 7.30
Shipping Weight (lbs.) 16.10
Unit Dimensions (hwd / cm) 178 x 5.6 x 5.2
Unit Dimensions (hwd / in.) 70 x 2.2 x 2.04
Unit Weight (kg) 4.51
Unit Weight (lbs.) 9.94
ENVIRONMENTAL
Operating Temperature Range 0C ~ 40C (32F ~ 104F)
Storage Temperature Range -30°C to +50°C (-22°F to +122°F)
Relative Humidity 5 to 95% non-condensing
COMMUNICATIONS
Network Monitoring Port RJ45 Network port, RJ45 Config/Console Access port; USB A port supports a variety of Envirosense2 environmental
and control modules. See Accessories>Management Hardware section for more information about these modules.
SNMP Compatibility Pre-installed LX platform interface provides remote monitoring via Java-free HTML5 web interface, telnet, SSH and
SNMP management systems
SPECIAL FEATURES
High Availability PDU Features Auto Probe Monitoring and Reboot (included)
3 / 4
STANDARDS & COMPLIANCE
Certifications Tested to UL60950-1: 2007 R12.11 (USA), CAN/CSA-C22.2 NO. 60950-1-07+A1: 2011 (Canada), FCC CLASS A
WARRANTY
Product Warranty Period
(Worldwide)
PART 15 (Emissions), NOM (Mexico), RoHS compliant, TAA Compliant
2-year limited warranty
© 2021 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
4 / 4
Loading...