Tripp Lite OMNIX350HG User Manual

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +[phone]

E-mail: [e-mail]

Model #: OMNIX350HG

Omni Smart UPS System - Line-interactive, medical-grade battery backup

Highlights

350VA line interactive tower UPS

Maintains sine-wave 230V nominal output over an input range of 159 to 266V

Professional features include USB port, IEC320 plug & outlets, built-in

isolation transformer

Input: IEC320 C14 inlet (230V) / Output: 6 IEC320 C13 (230V)

2 line phone suppression for TEL/DSL line protection

Description

Tripp Lite's OMNIX350HG offers medical-grade UPS protection with built-in line interactive voltage regulation, intelligent monitoring and unattended

shutdown capability. IEC320 plug & outlets, plus built-in isolation transformer with Faraday shield offers full isolation and removes common mode

noise. Tested to CE/IEC 60601-1 as medical electrical equipment. 350VA power handling capacity supports computers, inter-networking equipment

and other critical loads during commercial power failures. Line interactive voltage regulation corrects brownouts as low as 159V back to normal 230V

levels, saving battery reserves for use only during complete power failures. Includes, 2 line phone surge suppression and built-in USB

communications port that works with PowerAlert Software and cabling to provide automatic unattended shutdown of connected network and PC

applications.

Applications

Ideal UPS for protection of patient point of care solutions, wireless communications systems, electronic prescribing applications, medical imaging,

telemedicine and laboratory equipment. Units tested to CE/IEC 60601-1 provides ultimate safety and reliability for computer equipment used in

patient care areas and mission critical equipment. (Not recommended for life support applications.)

Package Includes

OMNIX350HG Hospital Grade UPS System

USB communication and telephone cables included

Warranty information

Instruction manual

Features

Ideal UPS protection for applications in medical patient-care areas where CE/ IEC 60601-1 electrical medical equipment is required

Line-interactive voltage regulation corrects brownouts as low as 159V without using battery power

IEC320 plug and outlets offer added degree of safety and reliability to input/output connections

Full line isolation prevents shock potential and operational problems in sensitive electronic equipment

Resistant to electrostatic discharge

Supports loads up to 350VA/225 watts

37 minutes half load runtime (with 175VA load), 15.5 minutes full load runtime (with 350VA load)

6 protected outlets; 6-inch dongle with IEC C14 inlet

1-USB port for monitoring interface

Complete surge protection, line isolation and EMI/RFI noise filtering

2 phone line surge suppression for modems, fax machines and other phone accessories

2 year product warranty

Complete remote monitoring cabling included, PowerAlert UPS management software available via free download

4 diagnostic LEDs indicate AC present, on battery, voltage correction & battery low/replace

Battery replacement door

Grounding lug

Specifications

SYSTEM OVERVIEW

Voltage compatibility 230V AC

Frequency
compatibility

50/60 Hz (auto-sensing)

OUTPUT

Output VA 350

Output watts 225

Output nominal voltage 230V AC

Output voltage
regulation

LINE MODE: Sine wave line voltage 230V (-18% / +8%)

Output frequency
regulation

LINE MODE: Passes line frequency of 50/60Hz +/-10%

Outlet quantity / type 6 IEC320 C13 output connections

INPUT

Maximum input amps 1.8A / 414 watts

Input connection type IEC320 C14 inlet

Input cord length 6 inch dongle, 16 gauge

Recommended
Electrical Service

10A 230V

BATTERY

Full load runtime 15.5 minutes (350VA)

Half load runtime 37 minutes (175VA)

DC system voltage 12 VDC

Typical battery lifespan 3-6 years, depending on usage

Battery recharge rate 2-4 hours to 90%

Replacement Battery
Cartridge

RBC52 (quantity 2)

VOLTAGE REGULATION

Voltage regulation
description

Line interactive UPS offers a single boost level of brownout correction to maintain usable, computer grade output

Direct pass through Input voltages between 200and 266V AC are passed through unchanged

Brownout correction Input voltages between 159 and 199V AC are boosted by 14%

LEDS ALARMS & SWITCHES

Front panel LEDs Yes, includes 4 front-panel status indicator LEDs for line power, battery power, voltage regulation and battery

low/replace status

Alarms Audible alarm indicates power failure conditions, silenceable via alarm cancel switch. Once cancelled, alarm will

resume when approximately 2 minutes of battery operation remain (assuming full load)

Switches Yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions

SURGE / NOISE SUPPRESSION