Owner’s Manual
1-Port Gigabit
PoE/PoE+ Extender
Model: NPOE-EXT-1G30
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
19-02-378-9338FB-EN.indd 1 3/6/2019 5:13:31 PM
Este manual esta disponible en español en la página de Tripp Lite:
www.tripplite.com/support
Ce manuel est disponible en français sur le site Web de Tripp Lite :
www.tripplite.com/support
Русскоязычная версия настоящего руководства представлена на
веб-сайте компании Tripp Lite по адресу: www.tripplite.com/support
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
Copyright © 2019 Tripp Lite. All rights reserved.
1
Package Includes
• NPOE-EXT-1G30 Gigabit PoE+ Extender
• Owner’s Manual
Product Features
• Save time and money by extending data and power over existing network
cables past the 100 m (328 ft.) limit
• Extend a 10/100/1000 Mbps application over longer distances by
cascading multiple extenders up to 500 m (1640 ft.)
• Supports all IEEE 802.3at- and IEEE 802.3af-compliant PoE+/PoE
devices (wireless LAN access points and bridges, VoIP, IP surveillance
cameras)
• Automatically detects and protects PoE/PoE+ equipment from being
damaged by incorrect installation (non-PoE devices only receive data)
• Plug and play—no additional power required
• Compact, wall-mountable design
19-02-378-9338FB-EN.indd 2 3/6/2019 5:13:31 PM
2
Single Extender Installation
1. Using a Cat5e/6 cable (up to 100 m / 328 ft. long), connect your
powered source device (such as a PoE switch) to the “IN” port on the
unit.
2. Using another Cat5e/6 cable (up to 100 m / 328 ft. long), connect
your remote PoE-powered device (PD) (such as VoIP or IP surveillance
camera) to the “OUT” port on the unit. The LEDs will illuminate orange
for power and green for signal.
Note: Your PoE source must meet or exceed IEEE 802.3at / 802.3af standards.
Please see Maximum Supported Power table for more information.
Single Extender Installation Diagram
CameraPoE Extender
PoE
Switch
Max 100 m (328 ft.) Max 100 m (328 ft.)
Single Extender Installation with Midspan Diagram
Switch
(Non-PoE)
Note: Where external power is required, the power source (e.g.. midspan or PoE
injector) must be installed between the Ethernet switch (non-PoE source) and the first
NPOE-EXT-1G30WP extender.
Midspan
Max 100 m (328 ft.) Max 100 m (328 ft.)
CameraPoE Extender
19-02-378-9338FB-EN.indd 3 3/6/2019 5:13:32 PM
3
Multiple Extender Installation
Note: You may only cascade four PoE extender units up to 500 m (1640 ft.) in a
single installation.
1. Using a Cat5e/6 cable (up to 100 m / 328 ft. long), connect your
powered source device (such as a PoE switch) to the “IN” port on the
unit.
2. Using another Cat5e/6 cable (up to 100 m / 328 ft. long), connect the
“OUT” port of the first extender to the “IN” port of the second extender.
Note: The green (input) and orange (output) LEDs will illuminate solid to indicate it
is receiving sufficient power.
3. Repeat Step 2 up to two more times for each additional PoE extender
you wish to add or connect your remote PoE powered device (PD) to the
“OUT” port of the second PoE extender.
Notes:
• The 4th PoE extender will only supply IEEE 802.3af up to 12W.
• Your PoE source must meet or exceed IEEE 802.3at / 802.3af standards. Please
see Maximum Supported Power table for more information.
Multi-Extender Installation Diagram
PoE Extender
PoE
Switch
Max 100 m (328 ft.) Max 100 m (328 ft.) Max 100 m (328 ft.) Max 100 m (328 ft.)
PoE Extender
PoE Extender
Camera
19-02-378-9338FB-EN.indd 4 3/6/2019 5:13:32 PM
4
Multiple Extender Installation
Maximum Supported Power
Multiple PoE Extenders can be connected every 100 m (328 ft.) for greater
distances. The actual figures depend on operating conditions. The range is
over 24 AWG or heavier Cat5e or Cat6 cable, except where specified.
Examples for low-power PoE devices (PoE Class 1, or require under 4 watts):
PoE Source
PoE switch
(802.3af)
400 m / 1312 ft. 400 m / 1312 ft. 500 m / 1640 ft. 500 m / 1640 ft.
Examples for medium power PoE Devices (PoE Class 2, or require under 6
watts):
PoE switch
(802.3af)
300 m / 984 ft. 300 m / 984 ft. 400 m / 1312 ft. 400 m / 1312 ft.
Examples for full-power PoE Devices (PoE Class 0 or 3, or require under 12
watts):
PoE switch
(802.3af)
200 m / 656 ft. 200 m / 656 ft. 300 m / 984 ft. 300 m / 984 ft.
15W midspan
(802.3af)
Maximum Distances
PoE Source
15W midspan
(802.3af)
Maximum Distances
PoE Source
15W midspan
(802.3af)
Maximum Distances
PoE+ switch
(802.3at)
PoE+ switch
(802.3at)
PoE+ switch
(802.3at)
30W midspan
(802.3at)
30W midspan
(802.3at)
30W midspan
(802.3at)
19-02-378-9338FB-EN.indd 5 3/6/2019 5:13:32 PM
5
Multiple Extender Installation
Examples for PoE+ Devices (PoE Class 4 under 22 watts, or 802.3at
compliant):
PoE Source
PoE switch
(802.3af)
Not applicable Not applicable 200 m / 656 ft. 200 m / 656 ft.
15W midspan
(802.3af)
Maximum Distances
PoE+ switch
(802.3at)
30W midspan
(802.3at)
Specifications
IEEE Standards IEEE 802.3af (Power over Ethernet)
Media Support
Ports (x1) RJ45 10/100/1000 Mbps Data
Protection Functions Short circuit protection for short GND
19-02-378-9338FB-EN.indd 6 3/6/2019 5:13:32 PM
IEEE 802.3at (High-Power PoE+ Power over
Ethernet)
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3ab (Gigabit Ethernet)
IEEE 802.3u (100Base-TX Fast Ethernet)
IEEE 802.3x (Flow control, for full duplex mode)
100Base-TX Cat5 UTP/STP RJ45, 8 pin
1000Base-T Cat5e/6 UTP/STP RJ45, 8 pin
+ Power Input port
(x1) RJ45 10/100/1000 Mbps Data
+ Power Output port
Overload protections for currents over 0.6A
6
Specifications
PoE Pinout Input IEEE 802.3af/at Standard Mode A
PoE Pinout Output IEEE 802.3af/at Standard Mode A
LED Input: Power On (Green), PoE On (Orange)
Operating Temperature -10°C to 45°C / 14°F to 113°F
Storage Temperature 20°C to 70°C / -4°F to 158°F
Operating Humidity 0% to 90% RH, Non-Condensing
Storage Humidity 0% to 95% RH, Non-Condensing
Unit Dimensions 145 x 60 x 40 mm / 5.7 x 2.4 x 1.6 in.
Pin 1: DC (-)
Pin 2: DC (-)
Pin 3: DC (+)
Pin 6: DC (+)
Pin 7: DC (-)
Pin 8: DC (-)
Pin 4: DC (+)
Pin 5: DC (+)
Pin 1: DC (-)
Pin 2: DC (-)
Pin 3: DC (+)
Pin 6: DC (+)
Output: Power On (Orange), PoE on (Green)
19-02-378-9338FB-EN.indd 7 3/6/2019 5:13:32 PM
7
Warranty and Product Registration
3-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of three
(3) years from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing
or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must
obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service
center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation
charges prepaid and must be accompanied by a brief description of the problem encountered and proof of
date and place of purchase. This warranty does not apply to equipment, which has been damaged by accident,
negligence or misapplication or has been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or
exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits
or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes,
claims by third parties, or otherwise.
Product Registration
Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered
into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
WEEE Compliance Information for Tripp Lite Customers and Recyclers
(European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations,
when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on
the country)
• Send the new equipment back for recycling when this ultimately becomes waste
Use of this equipment in life support applications where failure of this equipment can reasonably be expected
to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not
recommended.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
19-02-378-9338FB-EN.indd 8 3/6/2019 5:13:33 PM
8
19-02-378 93-38FB_RevB
Loading...