Gigabit PoE+ Midspan Active Injector - IEEE
802.3at/802.3af, 30W, 1 Port
MODEL NUMBER: NPOE-30W-1G
PoE+ injector uses existing Cat5e/6/6a cable to supply power to a PoE device connected to a non-PoE
switch.
Features
Adds a PoE Device to Your LAN Without a PoE SwitchNow you can add a surveillance camera,
wireless access point, VoIP phone or other PoE (Power over Ethernet) device to your home or office
network, even if your network switch doesn't support PoE. Instead of making an expensive upgrade to a
PoE switch, you can use this single-port PoE+ injector to send 30 watts of power, as well as Gigabit
Ethernet data, through your existing Cat5e/6/6a cabling.
Saves You Time and Money on Unnecessary Equipment UpdatesThis compact PoE plus injector
delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That
means, in addition to not buying a new PoE network switch, you also don't need to install new AC power
lines and electrical outlets. This cost-effective midspan injector sends DC power and Ethernet data
through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and
labor.
Expand Your PoE Network Up to 328.08-ft. (100 m)The NPOE-30W-1G delivers both power and data to
any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328.08-ft.) away. This allows
you to install a device in a building lobby, on a ceiling, inside a warehouse or anywhere else an AC power
outlet is unavailable. The PoE+ injector supports full-duplex 2 Gbps communication for sending and
receiving data simultaneously. It also protects your device against short circuits, high voltage and
overloads.
Simple Plug-and-Play Installation Has Your Device Connected in MinutesNo configuration or
software is required to add the NPOE-30W-1G to your LAN. Just connect your switch or network jack to
the shielded RJ45 LAN port and your PoE device to the shielded RJ45 POE port using existing
Cat5e/6/6a cable. Connect the unit's C6 inlet to a NEMA 5-15R outlet using the included power cord.
LEDs indicate the unit is receiving power and is ready to transmit data.
Designed for Installation Almost AnywhereMounting holes are featured for installing the midspan
injector on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The black
plastic housing fits in the palm of your hand, so it is small enough to hide away without interfering with
your workflow or décor. The fanless design is ideal for silent operation.
Highlights
●
Saves money by delivering 30W
of power + data up to 328.08-ft.
(100 m) through existing cabling
●
Extends power + data to any
PoE or PoE+ device installed
where no AC outlet is available
●
Supports Gigabit Ethernet data
transfer speeds up to 1000
Mbps (1 Gbps)
●
Quick and easy plug-and-play
installation with no configuration
necessary
●
Compact, hand-sized plastic
housing ready for mounting on
any smooth surface
Applications
●
Add a security camera to your
network without upgrading to a
new PoE switch
●
Install a touchscreen kiosk or
VoIP phone in an area without a
standard power connection
●
Fill in Wi-Fi dead spots in your
office with a wireless access
point connected to your LAN
System Requirements
●
Device that meets IEEE 802.3at
or IEEE 802.3af standards
Package Includes
●
NPOE-30W-1G Gigabit PoE+
Midspan Active Injector
●
Detachable C5 to NEMA 5-15P
power cord, 2-ft. (0.61 m)
●
Owner's manual
1 / 2
Specifications
OVERVIEW
UPC Code 037332203595
Technology Cat5/5e; Cat6; Cat6a
INPUT
Voltage Compatibility (VAC) 100; 110; 120; 127; 200; 208; 220; 230; 240
Input Frequency 50/60 Hz
PHYSICAL
Color Black
Primary Form Factor Desktop
Unit Dimensions (hwd / in.) 1.4 x 2.6 x 5.4
ENVIRONMENTAL
Operating Temperature Range 32 to 122 F (0 to 50 C)
Storage Temperature Range -4 to 176 F (-20 to 80 C)
Relative Humidity 10% to 90% RH, Non-Condensing
COMMUNICATIONS
Network Speed 1Gbps
IEEE Standards Supported 802.3; 802.3ab; 802.3af; 802.3at; 802.3u
CONNECTIONS
Side A - Connector 1 RJ45 (FEMALE)
Side B - Connector 1 RJ45 (FEMALE)
Network Switch Ports 10/100/1000 (RJ45)
STANDARDS & COMPLIANCE
Certifications FCC, RoHS, REACH
WARRANTY
Product Warranty Period
(Worldwide)
3-year limited warranty
© 2021 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
2 / 2