Tripp Lite N420-03M User Manual

Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model #: N420-03M
Highlights
3 Meter SC/ST Mode Conditioning Cable
Run 1000Base-LX Gigabit Ethernet over MMF by offsetting signal loss
IEEE 802.3z Gigabit Ethernet Compliant
Description
Tripp Lites Mode Conditioning Cables are designed for use in Gigabit Ethernet 1000BASE-LX applications. They are fully compliant with IEEE 802.3z
application standards. Mode Conditioning Cables are needed in applications where new high-speed Gigabit 1000BASE-LX routers and switches are
being deployed into existing multimode plants. The need for this patch cord is due to the single-mode launch nature of the -LX or long-wave (1300
nm) transceiver modules used for Gigabit Ethernet. Launching a single-mode laser into the center of a multimode fiber can cause multiple signals to
be generated that confuses the receiver at the other end of the fiber. These multiple signals, caused by Differential Mode Delay (DMD) effects,
severely limit the cable distance lengths for operating Gigabit Ethernet. A mode conditioning patch cord eliminates these multiple signals by allowing
the single-mode launch to be offset away from the center of a multimode fiber.
Applications
Use when connecting a LX type fiber transceiver ( Singlemode light ) to a Multimode backbone
Features
SC / ST Duplex Mode Conditioning Fiber Patch Cable - 3 Meter
Use Singlemode Transceivers on Multimode Fiber Backbones
Offsets the Singlemode Laser launch from the center of a Multimode fiber
Available in a variety of connector combinations
Lifetime Warranty
Specifications
PHYSICAL
Color Orange / Yellow
Style Fiber Optic
Length 3 Meter
CONNECTIONS
Connector A
SC
Connector B
ST
Number of Connectors 4
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=4166.
©2009 Tripp Lite. All Rights Reserved.
Loading...