Tripp Lite N286-10G-LR-S User Manual

Cisco-Compatible SFP-10G-LR-S SFP+
Transceiver - 10GBase-LR, DDM, Singlemode LC,
1310 nm, 10 km (6.1 mi.)

MODEL NUMBER: N286-10G-LR-S

Highlights

●

SFP+ transceiver module 100%
compatible with Cisco’s
equivalent module

●

Provides 10 Gbps throughput up
to 10 km (6.1 mi.) via
singlemode fiber cabling

●

LC duplex female connector
supports 10GBase-LR signal at
1310 nm wavelength

●

Hot-swappable interface lets
you install and uninstall without
shutting down

●

Supports DDM for monitoring
temperature and other real-time
operating parameters

Links a singlemode Gigabit Ethernet network cable to a Cisco router, server or switch’s SFP port.

Features

SFP+ Transceiver Designed for Connection to Your Cisco Network Switch or ServerThis SFP+

transceiver allows you to connect an 9/125 singlemode fiber optic cable to a 10 Gbps network router,
server or switch. It transmits data up to 10 kilometers (721 feet) and supports bi-directional Gigabit
Ethernet communication up to 11.1 Gbps. The metal housing protects against electromagnetic
interference (EMI) and excessive power dissipation.
Functionally Equivalent to Cisco SFP-10G-LR-S Transceiver ModuleThe MSA-compliant N286-10G­LR-S functions just like the equivalent Cisco SFP-10G-LR-S transceiver module and is manufactured to
meet or exceed Cisco specifications. You can use this transceiver with any compatible Cisco router,
server or switch and receive the same performance as the SFP-10G-LR-S.
Hot-Swappable for Installation Without Network InterruptionThis input/output device is fully hot­swappable, so you can install it without a potentially costly 10 Gbps network shutdown or device reboot.
Just plug the SFP+ end of the transceiver into your Cisco network device. The other end has an LC
duplex connector to link with singlemode fiber optic cable (sold separately). A convenient bail clasp latch
helps you carefully remove the module from the device.
Supports Digital Diagnostic Monitoring (DDM) for Real-Time Status MonitoringDDM support lets you
keep track of various operating statuses in real time, including transceiver temperature, input and output
power, and supply voltage.
S-Class Transceiver Highly Recommended for Enterprise NetworkThis S-Class fiber transceiver
module is ideal for enterprise network runs of shorter distances than other standard modules. The S-Class
N286-10G-LR-S supports only Ethernet protocol and operates only within commercial temperature ranges
(0 to 70°C).

Specifications

Applications

●

Install an additional LC duplex
port on a Cisco router, server or
switch for the purpose of
connecting a singlemode
Gigabit Ethernet network cable

System Requirements

●

Cisco or other compatible
network router, server or switch

Package Includes

●

N286-10G-LR-S Cisco­Compatible SFP-10G-LR-S
SFP+ Transceiver

●

Quick Start Guide

OVERVIEW

UPC Code 037332249241
Technology SFP+/QSPP+/QSFP28; Singlemode

1 / 2

Mode Type Singlemode

PHYSICAL

Color Silver
Unit Dimensions (hwd / in.) 0.49 x 2.3 x 0.55
Unit Weight (kg) 0.03
Unit Weight (lbs.) 0.064

ENVIRONMENTAL

Operating Temperature Range 32 to 158 °F (0 to 70 °C)
Storage Temperature Range -40 to 185°F (-40 to 85°C)
Relative Humidity 5% to 85% RH, Non-Condensing

COMMUNICATIONS

Wavelength 1310nm
Transmission Distance 10 km

CONNECTIONS

Side A - Connector 1 SFP+ (MALE)
Side B - Connector 1 LC DUPLEX (FEMALE)

FEATURES & SPECIFICATIONS

Driver Required No
Brand Compatibility Cisco
Optical Port LC
Multi-Source Agreement (MSA)

Compliant

SPECIAL FEATURES

Data Transfer Rate 10Gbps

WARRANTY

Product Warranty Period
(Worldwide)

Yes

3-year limited warranty

© 2021 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies

2 / 2