Tripp-Lite N254-024-6A Data Sheet
24-Port 1U Rack-Mount Cat6a Feedthrough Patch
Panel, RJ45 Ethernet
MODEL NUMBER: N254-024-6A
Manages and organizes Cat6a input and output cable connections in your high-density 10 Gbps Ethernet
network. Features RJ45 coupler jacks, so no 110 punchdown termination is required.
Description
The N254-024-6A 24-Port 1U Rack-Mount Cat6a Feedthrough Patch Panel meets or exceeds Cat6a
specifications and works with USOC, T568A and T568B wiring to comply with industry standards. Fully
rated for 10 Gbps Ethernet data transfer speeds, this low-profile patch panel manages and organizes the
cabling in your high-density network. No 110 punchdown termination is required. Just plug your Cat6a
cables into the 24 RJ45 coupler jacks on both sides of the panel. The detachable cable management bar
keeps patch cables neat, tidy and efficiently organized on the back of the panel. Ports are clearly
numbered and labeled to help you identify connections. Mounts easily into 1U of an EIA-standard 19-inch
rack. Grounding wire included. Compliant with the Federal Trade Agreements Act (TAA) for GSA
Schedule purchases.
Highlights
●
Meets or exceeds Cat6a
specifications
●
24 RJ45 coupler jacks on both
sides
●
Cable management bar keeps
patch cables organized
●
Rated for 10 Gbps Ethernet data
transfer speeds
●
Mounts into 1U of EIA-standard
19 in. racks
Package Includes
●
N254-024-6A 24-Port 1U Rack-
Mount Cat6a Feedthrough
Patch Panel
●
Detachable cable management
bar
●
Grounding wire
Features
Manages and Organizes High-Density Network Cabling
●
Meets or exceeds Cat6a specifications
●
Works with USOC, T568A and T568B wiring to comply with industry standards
●
Fully rated for 10 Gbps Ethernet data transfer speeds
Top-Quality Performance and Efficiency
●
24 RJ45 coupler jacks on both the front and rear
●
Ports are numbered and labeled for easy connection identification
●
Low-profile form factor requires no 110 punchdown termination
Cable Management Bar on Rear
1 / 2
●
Detachable bar keeps patch cables neat, tidy and organized
Quick, Easy Installation
●
Mounts easily in 1U of EIA-standard rack
●
Includes grounding wire
TAA-Compliant for GSA Schedule Purchases
●
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule Purchases
Specifications
OVERVIEW
UPC Code 037332189974
Technology Cat5/5e; Cat6; Cat6a
PHYSICAL
Shipping Dimensions (hwd / in.) 19.690 x 2.910 x 2.760
Shipping Dimensions (hwd / cm) 50.01 x 7.39 x 7.01
Shipping Weight (lbs.) 2.2000
Shipping Weight (kg) 1.00
CONNECTIONS
Ports 24
Side A - Connector 1 RJ45 (FEMALE)
Side B - Connector 1 RJ45 (FEMALE)
WARRANTY
Product Warranty Period
(Worldwide)
Lifetime limited warranty
© 2018 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards.
2 / 2
Loading...