Tripp Lite N238-P01-MPTL-A Quick Start Guide

Quick Start Guide

MPTL Cat6a STP Toolless

RJ45 Plug, PoE++ Compliant

Model: N238-P01-MPTL-A

Español 9 • Français 17 • Русский 25

WARRANTY REGISTRATION

automatically entered to win an ISOBAR

surge protector in our monthly drawing!

tripplite.com/warranty

19-08-286-9339E2.indb 1 11/6/2019 9:53:45 AM

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

Package Includes

• N238-P01-MPTL-A MPTL Cat6a STP Toolless RJ45 Plug

• IDC Cap (x1)

• Dust Cap (x1)

• Quick Start Guide

Product Features

• Modular Plug Terminated Link (MPTL) technology allows the Cat6a cable to be terminated on one end to an RJ45 plug that then connects directly to a device, such as a Wireless Application Protocol (WAP) or surveillance camera

• Simpliﬁes installation of devices in an above-ceiling application where installing a faceplate is not practical or where outlets, jacks and patch cords must be plenum-rated

• 4PPoE compliant for Power over Ethernet (PoE++) installations up to 100W

• Accommodates 22 to 26 AWG solid or stranded cabling

19-08-286-9339E2.indb 2 11/6/2019 9:53:45 AM

Installation

Organize the braided / drain wire / foil to approximately

0.5 in. (10~12 mm)

1 in.

(25 mm)

0.25 in.

S / FTP

(6~8 mm)

or or

0.5 in. (10~12 mm)

1 in.

(25 mm)

Leave approximately

0.25 in. (6~8 mm)

excess foil for A/B wires

(orange / green pairs)

1 in.

(25 mm)

0.25 in. (6~8 mm)

0.5 in. (10~12 mm)

F / FTP F / UTP

1 in. (25 mm)

Nut

0.5 in. (10~12 mm)

19-08-286-9339E2.indb 3 11/6/2019 9:53:46 AM

Installation

Follow the wire scheme map and

angle to route A/B wires through the IDC cap

19-08-286-9339E2.indb 4 11/6/2019 9:53:47 AM

Installation

6 7

8 9

Use a pair of wire cutters to make the front row wires ﬂush

19-08-286-9339E2.indb 5 11/6/2019 9:53:47 AM

Installation

19-08-286-9339E2.indb 6 11/6/2019 9:53:48 AM

Installation

Speciﬁcations

Insertion Life 750 Mating Cycles Re-Termination Life Up to 20x Cable Gauge Compatibility 22 to 26 AWG (Solid or Stranded) Cable Jacket Diameter 0.25 in. to 0.3 in. (6.5 mm to 8.5 mm) Electrical Current 1.5A Voltage Proof (Contact to Contact) Voltage Proof (Contact to Shield) Operating Temperature Range 14°F to 140°F (-10°C to 60°C) Storage Temperature Range -40°F to 154°F (-40°C to 68°C) Relative Humidity 10% to 90% RH (Non-Condensing)

1000V DC

1500V DC

19-08-286-9339E2.indb 7 11/6/2019 9:53:48 AM

Warranty and Product Registration

Limited Lifetime Warranty

Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for its lifetime. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, at its sole discretion. Service under this Warranty can only be obtained by Buyer delivering or shipping the product (with all shipping or delivery charges prepaid) to: Tripp Lite, 1111 W. 35th Street, Chicago, IL 60609. Seller will pay return shipping charges.

Visit tripplite.com/support before sending any equipment back for repair. THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT,

MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES.

(Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This Warranty gives you speciﬁc legal rights, and you may have other rights which vary from jurisdiction to jurisdiction).

WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual applications are subject to great variation, the manufacturer makes no representation or warranty as to the suitability or ﬁtness of these devices for any speciﬁc application.

PRODUCT REGISTRATION

Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)

• Send the new equipment back for recycling when this ultimately becomes waste

Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to signiﬁcantly affect its safety or effectiveness is not recommended.

Tripp Lite has a policy of continuous improvement. Speciﬁcations are subject to change without notice. Photos and illustrations may differ slightly from actual products.

19-08-286-9339E2.indb 8 11/6/2019 9:53:48 AM

1111 W. 35th Street, Chicago, IL 60609 USA tripplite.com/support

19-08-286 93-39E2_RevA

Guía de Inicio Rápido

Enchufe RJ45 Sin

Herramienta STP Cat6a MPTL,

Compatible con PoE++

Modelo: N238-P01-MPTL-A

English 1 • Français 17 • Русский 25

19-08-286-9339E2.indb 9 11/6/2019 9:53:48 AM

1111 W. 35th Street, Chicago, IL 60609 EE. UU. • tripplite.com/support

El Paquete Incluye

• N238-P01-MPTL-A - Enchufe RJ45 Sin Herramienta STP Cat6a MPTL

• Tapa IDC (x1)

• Tapa Guardapolvos (x1)

• Guía de Inicio Rápido

Características del Producto

• La tecnología de Enlace Terminado de Enchufe Modular [Modular Plug Terminated Link] (MPTL) permite que el cable Cat6a se termine en un extremo a un enchufe RJ45 que luego se conecte directamente a un dispositivo, como uno con Protocolo de Aplicación Inalámbrica [Wireless Application Protocol] (WAP) o una cámara de vigilancia

• Simpliﬁca la instalación de dispositivos en una aplicación sobre techo donde la instalación de una placa frontal no resulta práctica o donde los tomacorrientes, conectores y cables patch deben ser de clasiﬁcación plenum

• Compatible con 4PPoE para instalaciones de Energía sobre Ethernet [Power over Ethernet] (PoE++) de hasta 100W

• Permite cableado sólido o trenzado calibre 22 a 26 AWG

19-08-286-9339E2.indb 10 11/6/2019 9:53:48 AM

+ 22 hidden pages